Application of a Novel Alkali-Tolerant Thermostable DyP-Type Peroxidase from Saccharomonospora viridis DSM 43017 in Biobleaching of Eucalyptus Kraft Pulp

Saccharomonospora viridis is a thermophilic actinomycete that may have biotechnological applications because of its dye decolorizing activity, though the enzymatic oxidative system responsible for this activity remains elusive. Bioinformatic analysis revealed a DyP-type peroxidase gene in the genome of S. viridis DSM 43017 with sequence similarity to peroxidase from dye-decolorizing microbes. This gene, svidyp, consists of 1,215 bp encoding a polypeptide of 404 amino acids. The gene encoding SviDyP was cloned, heterologously expressed in Escherichia coli, and then purified. The recombinant protein could efficiently decolorize several triarylmethane dyes, anthraquinonic and azo dyes under neutral to alkaline conditions. The optimum pH and temperature for SviDyP was pH 7.0 and 70°C, respectively. Compared with other DyP-type peroxidases, SviDyP was more active at high temperatures, retaining>63% of its maximum activity at 50–80°C. It also showed broad pH adaptability (>35% activity at pH 4.0–9.0) and alkali-tolerance (>80% activity after incubation at pH 5–10 for 1 h at 37°C), and was highly thermostable (>60% activity after incubation at 70°C for 2 h at pH 7.0). SviDyP had an accelerated action during the biobleaching of eucalyptus kraft pulp, resulting in a 21.8% reduction in kappa number and an increase of 2.98% (ISO) in brightness. These favorable properties make SviDyP peroxidase a promising enzyme for use in the pulp and paper industries.

Biobleaching is the bleaching of pulps using ligninolytic microorganisms or enzymes that reduce the amount of chemical bleach required to obtain a desirable brightness of pulps. Some enzymes from fungi and bacteria, such as extracellular xylanase and peroxidase from Streptomyces sp [22,23], laccase and manganese peroxidase produced by Trametes versicolor [24,25], have been studied for biobleaching of paper pulp and other industrial applications, as they degraded lignin or xylan and decolorized the pulp [26,27]. However, no DyP-type peroxidase enzymes has been characterized and applied in the pulp bleaching field.
In the current work, a novel peroxidase, SviDyP, related to a putative DyP-type peroxidase enzyme, was isolated, purified, and characterized from Saccharomonospora viridis, a pentachlorophenol-degrading thermophilic actinomycete [28]. In addition, the catalytic properties of the enzyme and its application as an enzymatic pretreatment for kraft pulp bleaching were investigated. SviDyP was an alkali-tolerant thermostable dye-decolorizing peroxidase reported from the Pseudonocardiaceae family, which belongs to the genus of Saccharomonospora, and it had an accelerated action during the biobleaching of eucalyptus kraft pulp. These favorable properties made SviDyP a good candidate for application in the pulp and paper industries.
Escherichia coli DH5a and E. coli BL21 (Tiangen, Beijing, China) (were cultivated in Luria Bertani (LB) medium at 37uC for gene cloning, sequencing, and expression. The pEASY-T3 vector (TransGen, Beijing, China) was used for plasmid gene cloning and sequencing. The plasmid pET-28a (+) (Takara Bio, Otsu, Japan) was used as an expression vector. Manganese peroxidase (MnP), azure B, brilliant green, reactive blue 19, reactive green 19, reactive yellow 2, reactive black 5, reactive red 120, malachite green and crystal violet were purchased from Sigma (St. Louis, MO, USA). All other reagents used were of analytical grade unless otherwise stated.
Decolorization assay for S. viridis on solid medium Azure B, which was membrane-filtered with a 0.45-mm cellulose nitrate filter, was mixed with STS medium to give a final concentration of 0.1 g l 21 and used to make agar plates. S. viridis was inoculated onto the plates with a sterile spreader. The plates were then incubated at 45uC and their surface appearance was observed daily. A ring of decoloration around the colonies on the blue medium is a qualitative signal of presence or absence of dyedecolorizing enzyme DyP-type peroxidase. The presence of bleaching around colonies on the blue medium indicates the production of the dye-decolorizing enzyme.

Bioinformatic and phylogenetic analysis and homology modeling
The whole genome of S. viridis DSM 43017 is available from the GenBank database under the accession number NC_013159 [29]. By performing a sequence homology comparison between four well characterized DyP-type peroxidases from Shewanella oneidensis TyrA [13], Bacteroides thetaiotaomicron BtDyP [30], Rhodococcus jostii DyPB [31], and E. coli YcdB [32], one unannotated DyP-type peroxidase gene (Gene YP_003135694) was identified in the genome of S. viridis DSM 43017. The open reading frame, which we tentatively named svidyp, showed sequence similarity to peroxidase genes in other dye-decolorizing microbes. The DNA sequence of svidyp was analyzed using the software package DNAMAN 6.0 (Lynnon Corporation, Quebec, Canada). Nucleotide and the corresponding deduced amino acid sequence homology searches were carried out using the BLASTn and BLASTp programs, respectively, at the NCBI website (http:// www.ncbi.nlm.nih.gov/BLAST/). Multiple sequence alignment was performed by ClustalW [33]. A phylogenetic tree containing the closest homologs of the DyP protein was constructed using MEGA 5.2 with the neighbor-joining algorithm [34]. The deduced tertiary structure of SviDyP was derived from the amino acid sequence using SWISS-MODEL [35][36][37].
Gene cloning, heterologous expression and enzyme purification Genomic DNA from S. viridis was isolated following overnight growth in STS liquid medium. Cells were harvested by centrifugation (10,0006g, 25uC for 2 min). DNA extraction was then performed using the Bacterial Genomic DNA Extraction Kit V.3.0 (Takara) according to the manufacturer's instructions. Two primers were designed at the 59 and 39 ends of the svidyp gene with the following sequences: Svidyp-F: 59-GGCGAATTCAT-GAAGGGCCGGCGGTTC-39 and Svidyp-R: 59-GCCAAG-CTTTCAGGCTTCCAACAGCGG-39, which contained the restriction sites EcoRI and HindIII (underlined), respectively, to enable directional cloning into the pET-28a (+) expression vector. Using these primers, the complete svidyp gene was PCR-amplified from S. viridis genomic DNA. PCR amplification was performed using Taq DNA polymerase, 106 PCR buffer (Mg 2+ Plus), and dNTP mixture (Takara) under the following conditions: 5 cycles of 94uC for 30 s, 67.3uC for 30 s, and 72uC for 1 min, followed by 30 cycles of 94uC for 30 s, 63.7uC for 30 s, and 72uC for 1 min.
The resulting PCR product was gel-purified, digested with EcoRI and HindIII, and cloned into the corresponding site of the pET28a (+) vector to construct the recombinant plasmid pET28asvidyp. The plasmid was then transformed into chemically competent E. coli BL21 cells. Plasmid DNA from recombinant E. coli was isolated using a Plasmid Purification Kit (Takara). DNA concentration was estimated by the absorbance at 260 nm, and DNA integrity was verified by agarose gel electrophoresis. Transformants were identified by PCR analysis and enzymatic digestion, both as described above, and were then confirmed by DNA sequencing using the primers T7 and T7-terminor. Sequencing was carried out by Beijing AuGCT DNA-SYN Biotechnology Co., Beijing, China.
A positive transformant harboring pET28a-svidyp was isolated as a single colony for gene expression. The transformant was cultured overnight at 37uC in 10 ml LB medium containing kanamycin at 50 mg ml 21 . The culture was then inoculated into fresh LB medium (1:100 dilutions) containing kanamycin and was grown at 37uC to an OD 600 of approximately 0.6. Isopropyl-b-D-1-thiogalactopyranoside (IPTG) was then added to a final concentration of 1.0 mM for induction, and the culture was further cultivated at different temperature and time. Following induction with 1.0 mM IPTG at 25uC for 3 h, little activity was detected from the cell lysate, while incubation at 16uC for 12 h the activity in the lysate increased to 9.4 U ml 21 . Thus, to effectively induce enzyme expression, induction with 1.0 mM IPTG at 16uC overnight was selected for further production of the recombinant DyP peroxidise. No DyP peroxidase activity was detected from the uninduced transformant or from the transformant harboring the empty pET-28a (+) vector.
Cultures of induced recombinant E. coli (200 ml) were centrifuged (10,0006g, 4uC for 10 min) and the cell pellets were resuspended in 10 ml sodium phosphate buffer (50 mM, pH 8.0). The cell suspension was then lysed by sonication (pause on: 10 s; pause off: 10 s; power: 130 W; time: 30 min) using a cell ultra sonicator (Sonics* VCX130; Sonics & Materials, CT, USA). Following sonication, the unbroken cells and large debris were removed by centrifugation (12,0006g, 4uC for 20 min) and the supernatant was collected. Because the enzyme was expressed as a His-tagged protein, the supernatant was loaded onto a Ni-affinity column (Ni-NTA Agarose; Qiagen, Valencia, CA, USA) and eluted with a linear gradient of imidazole (20-250 mM, 25 ml) in sodium phosphate buffer (20 mM phosphate, 300 mM NaCl, pH 8.0), at a flow rate of 1 ml min 21 . Fractions displaying DyPperoxidase activity were combined and applied to a Sephadex-G75 (106200 mm) column pre-equilibrated with 0.1 M phosphate buffer (pH 7.0) and eluted with the same buffer at a flow rate of 0.5 ml min 21 . The purified enzyme with purification yields of 40.3% (Table 1) was stored at 220uC until further characterization. The protein concentration was determined using a Bradford assay [38] using bovine serum albumin as a standard. The purity of SviDyP was verified by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) analysis on a 12% gel as described previously [39] and by Western blotting analysis using an anti-His6 tag mouse monoclonal antibody [40].

Enzyme assays
Brilliant green, a representative triarylmethane dye, was used as the substrate. The substrate solution consisted of 125 mM brilliant green in 50 mM phosphate buffer (pH 7.0). One hundred microliters of the purified SviDyP enzyme solution (0.01 mg ml 21 ) was mixed with the substrate solution. All reactions were started by addition of H 2 O 2 (0.1 mM for all tests). The total volume of the enzyme reaction mixture was then adjusted to 3 ml. The enzyme activity was calculated by measuring the variation in absorbance at 623 nm using the molar extinction coefficient of brilliant green (max. wavelength: 623 nm; e 623 = 18,000 M 21 cm 21 ). One unit of enzyme activity was defined as the amount of enzyme that decolorized 1 mmol of brilliant green at 60uC in 1 min [41]. The same method was used to study the substrate range of the enzyme using reactive blue 19 (max.

Enzyme characterization
Aliquots of the recombinant SviDyP sample (1 mg ml 21 ) were put under various conditions to test its stability. The optimal pH for enzyme activity was determined by measuring the reaction rate in buffers covering a pH range of 3.0-12.0. The buffers used were 50 mM citric acid-Na 2 HPO 4 (pH 3.0-8.0), 50 mM Tris-HCl (pH 8.0-9.0), and 50 mM glycine-NaOH (pH 9.0-12.0). The pH stability was measured by adding enzyme to buffers ranging from pH 2.0-10.0 at 37uC for 1 h without the substrate solutions, and then, its residual activity was analyzed as described above. The highest activity of the enzyme, treated as above, was defined as 100%. The optimal temperature for enzyme activity was examined over the temperature range of 30-90uC. To estimate the thermal stability, the enzymes were incubated at 50uC, 60uC, 70uC, or 80uC for 0.5, 1, 2, 3, 4, and 5 h without substrate, and the residual enzyme activity was measured with the method as described above. To determine the effect of different metal ions and chemical reagents on the enzyme activity, the enzyme sample (1 mg ml 21 ) was incubated for 30 min at 37uC and pH 7.0 in 0.05 M Britton-Robinson buffer, supplemented with the following additives respectively (final concentration, 5 mM): SDS, bmercaptoethanol, ethylenediaminetetraacetic acid (EDTA), ZnCl 2 , BaCl 2 , MnCl 2 , MgCl 2 , AlCl 3 , CoCl 2 , CaCl 2 , LiCl, FeCl 2 , and FeCl 3 . The residual activity was then assayed using the method as described above. And a system without any additives was used as a control.
The K m , and V max values for the purified SviDyP protein were determined by several substrates including reactive blue 19, reactive yellow 2 and brilliant green. Lineweaver-Burk plots were generated from the initial rates obtained at varying substrate concentrations with a constant concentration of the second substrate [42]. Each experiment was repeated three times and each experiment included three replicates.  16.0% (w/v), sulfureted degree 25% (w/v), liquid ratio 1:6, and a cooking temperature of 160uC for 2 h. The optimization of enzyme dose and reaction time for biobleaching was carried out by treating pulp with varying doses of DyP-type peroxidase, ranging from 0-6.0 U g 21 dry pulp, for various time intervals up to 6 h. Pulp properties were investigated at regular intervals. Enzyme-treated and untreated pulp samples at 10% pulp consistency were incubated at 65uC with SviDyP (5 milligram protein per gram dried pulp, equivalently enzyme dosage as 3 U g 21 which was in terms of enzyme activity towards brilliant green) in 50 mM citric acid-Na 2 HPO 4 buffer (pH 7.0) for 2 h, whereas the biobleaching by MnP with 0.5 mM MnSO 4 was performed at 25uC in pH 4.5 for 2 h as the positive control. 0.1 mM H 2 O 2 was added in all the assays. During the bleaching treatment, kneading the pulp mixture every 15 min was needed in order to make sure all ingredients can mix well. After the enzyme bleaching, pulps were thoroughly washed with deionized water to remove soluble reducing sugars and any free soluble residual lignin, and then made into pieces of paper by the sheet forming machine. Pulp sheet preparation was conducted as described in the paper [43]. Degree of brightness of pulp according to ISO (International Standards Organization) was measured on an YQ-Z-48A (Qingtong, Hangzhou, China) brightness color tester. Pulp kappa number was determined by using TAPPI useful method T236 (Technical Association of the Pulp and Paper Industry, Atlanta, Ga.). All reported data are averages of experiments performed in at least six replicates.

Scanning electron microscopy
Samples of pulp fibers were processed for scanning electron microscopy (SEM). Paper pulp samples were formed into hand sheets using a Buchner funnel. Small pieces of fiber were vacuum dried in the presence of P 2 O 5 , placed on the stubs and mounted with silver tape, and then sputter coated with gold using fine coat. The samples were examined at 5.0 kV under a scanning electron microscope (Hitachi S-4300, Ibaraki, Japan) at various magnifications.

Results
Decolorization assay for S. viridis on solid medium Some bleaching laps were observed on STS medium mixed with 0.1 g l 21 azure B around colonies of S. viridis (Fig. 1), which were produced after incubating at 45uC for 3 days, indicating the presence of a dye-decolorizing enzyme. This indicated one or more extracellular dye-decolorizing enzymes produced in the cultivating process of S. viridis. SviDyP is a member of the DyP-type family enzymes To isolate the gene encoding the DyP-type peroxidase from S. viridis DSM 43017, two specific primers, Svidyp-F and Svidyp-R, were designed. PCR amplification of the DyP-peroxidase gene (GenBank under accession number KF444221) of S. viridis generated a DNA fragment of 1215 bp, which encoded a polypeptide of 404 amino acids with a predicted molecular mass of 44.5 kDa and a deduced isoelectric point of 5.17. Sequence analysis showed that overall G + C content of the svidyp gene was 70.1%.

Heterologous expression and purification of SviDyP
The svidyp gene was successfully cloned into the pET28a vector and expressed in E. coli BL21, forming the recombinant clone E. coli BL21/pET28a-svidyp, with the expression of His-tagged protein. The purified SviDyP protein, as verified by SDS-PAGE analysis and Western Blot analysis (Fig. 4a) by anti-6xHis antibody, was about 45 kDa, consistent with the theoretical value of 44.5 kDa.

Biochemical and spectroscopic characterization of SviDyP
The UV-visible spectrum of SviDyP at resting state showed the main Soret band at 406 nm and two charge transfer bands at 503 nm and 636 nm (Fig. 4b), as well as a Reinheitszahl ratio (A 406 /A 280 ) of 1.7. The molar absorption coefficient of SviDyP, e 406, was 97,000 M 21 cm 21 , similar to values found for other peroxidases and DyPs [8,44].
The recombinant enzyme expressed and purified from E. coli BL21 was then biochemically characterized. The controls of without H 2 O 2 and/or without enzyme were without significant statistical difference. Substrate specificity of the enzyme was determined by using a subset of well-known peroxidase substrates and anthraquinone and azo dyes ( Table 2). The enzyme displayed maximal activity towards the anthraquinone dye reactive blue 19 (1.29 U mg 21 ), the azo dyes reactive green 19, reactive yellow 2, reactive black 5, and reactive red 120 (1.32, 4.86, 0.96 and 0.69 U mg 21 , respectively), and the triarylmethane dyes brilliant green, malachite green, and crystal violet (12.24, 8.4 and 4.11 U mg 21 , respectively). SviDyP was able to act on veratryl alcohol (0.03 U mg 21 ), but not very efficiently (Table 2), and also showed activity towards azure B (1.62 U mg 21 ), a methylated thiazine dye that is a good substrate for lignin peroxidase [45]. Additionally, SviDyP showed a modest activity towards 2, 6 -dimethoxyphenol (0.06 U mg 21 ) which is a typical methoxylated phenol substrate for plant peroxidases. From the above, it is true that SviDyP displays (DyPtype) peroxidase activity.
To study the behavior of the enzyme under various pH and temperature conditions, brilliant green was used as the substrate. The optimal pH of SviDyP at 60uC was 7.0. It had broad pH adaptability (.35% activity at pH 4.0-9.0) and retained over 62% of the peak activity at pH 6.0-8.0 (Fig. 5a). SviDyP was highly alkali-tolerant, retaining at least 80% of its initial activity after incubation at 37uC for 1 h in buffers ranging from pH 5.0-10.0 (Fig. 5b). The optimal temperature for SviDyP activity was 70uC, at pH 7.0 (Fig. 5c). SviDyP was highly thermophilic, retaining at least 63% of its maximum activity at 50-80uC, and approximately 95% at 80uC. The thermostability of the enzyme was investigated for a period of 5 h at temperatures ranging from 50-80uC (Fig. 5d). It was observed that SviDyP maintained approximately 60% of maximal activity at 60uC and 70uC for at least 3 h and 2 h, respectively.
The effect of different metal ions and metal chelating agents on the enzymatic activity was also assayed, using brilliant green as the substrate ( Table 3). The activity of control without any additives was defined as 100%. The activity of the enzyme was not affected (residual activity,.80%) by the presence of 5 mM final concentration of Ba 2+ , Mn 2+ , Mg 2+ , Fe 2+ , or EDTA. An obvious reduction in catalytic activity was found in solutions containing 5 mM Fe 3+ or SDS. Al 3+ and Co 2+ caused 27.6% and 16.9% activation of SviDyP, respectively. The addition of 5 mM Cu 2+ , Zn 2+ , Ca 2+ , or Li + had similar but less activating effects on the activity of SviDyP, probably through promoting an oxidation reaction. b-mercaptoethanol highly boosted the enzymatic activity by almost a factor of 8.5.
The kinetic analysis of purified SviDyP corroborated the Michaelis-Menten behavior of the enzyme, with a V max of 38.4660.98 mmol l 21 min 21 and a K m of 58.8764.7 mmol l 21 for brilliant green, a V max of 3.760.41 mmol l 21 min 21 and a K m of 187.2616.6 mmol l 21 for reactive yellow 2, and a V max of 2.260.26 mmol l 21 min 21 and a K m of 210.2616.5 mmol l 21 for reactive blue 19. Such kinetic behavior strongly suggested that the cloned enzyme might be a DyP-type peroxidase.

Enzyme effects on pulp bleaching
Enzyme effects on pulp bleaching were reflected by measuring the physicochemical properties of paper pulp biobleached by enzymic preparations. The unbleached/raw eucalyptus kraft pulp had a kappa number of 11.0 and a brightness of 33.6% (ISO) [43]. With the increase of enzyme dosage and reaction time, the pulp brightness was increased and kappa number was reduced gradually, and then they keep invariant ( Figure S2). When the enzyme dosage was 3 U g 21 ( Figure S2a, b) and the reaction time was 2 h ( Figure S2c, d), the pulp brightness reached the maximum, and pulp kappa number reached the lowest value. Therefore, the choice of 3 U g 21 as an optimal enzyme dosage and 2 h as an optimal reaction time were the best condition of SviDyP biobleaching kraft pulp ( Figure S2). The experiments of pulp bleaching by recombinant protein SviDyP showed that enzyme treatment to improve the brightness of the pulp 2.98%, pulp kappa number reduced 21.8% compared with control ( Table 4), indicating that the enzyme treatment can significantly improve the brightness of the pulp, but reduce kappa value will help subsequent bleaching. Application of MnP in the pulp bleaching experiment showed that MnP reduced the specific pulp kappa number by 31.8%, and increased the whiteness of pulp by 5.90% at pH 4.5, 25uC (Table 4), whereas it reduced the specific pulp kappa number by 24.8% and increased the whiteness of pulp by 3.26% at pH 7, 65uC.
To study the effect of the enzyme on fiber surface morphology in SviDyP-bleached pulp, eucalyptus kraft pulp fiber morphology and surface changes were observed by SEM (Fig. 6). Without any enzymatic bleaching, eucalyptus kraft pulp fibers were stiff, and the surface structure was relatively smooth with no damage or cracks (Fig. 6a). The surface morphology of fibers treated with MnP is shown in Fig. 6b and the fibers treated with DyP-type peroxidase from S. viridis are shown in Fig. 6c and 6d. The pulp fiber surface treated with DyP-type peroxidase from S. viridis appeared rough and wrinkled and showed signs of slight fissures as well as that treated with MnP. There were also many holes in the  surface fibers, and fibers began to increase in flexibility (Fig. 6b, 6c  and 6d). These representative images show the obvious cracks, grooves and spalling in the surface of the fibers, with some fibers having holes with an aperture diameter of 7 mm, which increases fiber flexibility.

Discussion
The pentachlorophenol-degrading thermophilic actinomycete S. viridis and its extracellular enzymes offer great potential for different biotechnological applications. Both a crude extracellular xylanase [46] and a purified xylanase [47], apparently in the absence of cellulase or endoglucanase activity, have been described in S. viridis, and may represent a potential new enzyme source for use in pulp bleaching preparations. In the current study, we reported the cloning, expression, purification, characterization, and pulp biobleaching application of an alkali-tolerant thermostable peroxidase SviDyP from S. viridis DSM 43017.
Bioinformatic analysis revealed one unannotated DyP-type peroxidase gene in the genome of S. viridis DSM 43017 that had sequence similarity with other DyPs at the primary structure level showing the characteristic conserved residues in the hemebinding site and GXXDG motif [12]. Based on the phylogenetic analysis, SviDyP belongs to subfamily A of DyPs. Compared with other DyPs from subfamily A, the purified recombinant SviDyP, appeared remarkably broad range substrate specificity of which could degrade various dyes, such as triarylmethane dyes, anthraquinonic and azo dyes, at different levels, much better than some enzymes grouped into subfamily A, for example, YcdB [48], TfuDyP [21]. The enzyme could efficiently decolorize triarylmethane dyes to other triarylmethane dye-degrading microorganisms [49,50], and was more active towards crystal violet [51,52] and malachite green [51,53,54]. SviDyP also showed the ability to degrade anthraquinonic and azo dyes under neutral to alkaline conditions. Hence, such a multifunctional peroxidase with wide substrate specificity was likely capable of decolorizing other, currently unidentified, xenobiotics, Which suggested that SviDyP might be applied directly to solve various environmental and industrial problems, such as the disposal of dye wastewater and pulp biobleaching rather than the DyPs [8,9] which usually worked under acid condition.
To further explore the feasibility of using SviDyP in biotechnological applications, enzyme stability was evaluated at different pH levels and temperatures. More luckily, SviDyP was very stable over a pH range of 5-10, and retained more than 80% of the maximum residual activity. It also displayed high thermal stability, maintaining 63% of residual activity after 4 h of incubation at 50uC, and more than 60% of residual activity after 2 h of incubation at 60uC. SviDyP showed greater stability than DyP from Anabaena sp. [16], which had an activity loss of 90% following 3 h incubation at 50uC. Stability studies showed that SviDyP exhibited a high degree of stability under alkaline pH and high temperatures. This ability to work efficiently under such high pH environments was a characteristic that distinguishes DyPs from most peroxidases [55]. These findings enriched DyP-type peroxidases family's information databases and laid the foundation for the study of structure, function and reaction mechanisms of SviDyP.
Concerning the influence factors of using SviDyP in the further bleaching industrial application, the activation/inactivation effect of the different metal ions and chemical reagents on the enzyme activity was studied. Interestingly, addition of EDTA did not inhibit the enzyme, which suggested that there are no essential ions in the reaction mixture for the enzyme activity [7,8]. Al 3+ had similar activating effect between SviDyP and Pseudomonas aeruginosa DyPPa [7], probably through promoting the oxidation. SDS resulted in the complete activity loss of SviDyP and DyPPa [7], which demonstrated that SDS could be an important DyP inhibitor. b-mercaptoethanol highly boosted the enzymatic activity presumably by counteracting the oxidation effects of the S-S linkage between cysteine residues [56,57].
The applicability of SviDyP in biobleaching of kraft pulp, a process of high biotechnological interest, was examined by prebleaching eucalyptus kraft pulp with the purified SviDyP enzyme. Under 65uC, pH 7.0, SviDyP enzyme had positive effects on the pulp bleaching process as well as MnP, while the biobleaching effects of MnP at 25uC, pH 4.5, were better than SviDyP at 65uC, pH 7.0. These data suggest a slightly temperature and pH adjustment were needed in the usage of SviDyP in bleaching pulp. Furthermore, the SEM studies revealed that the existence of local fracture phenomena and the large area of the trench structure containing holes would result in the fiber structure becoming loose, and the internal structure of lignin being fully exposed. This may help the bleaching agent permeate better, and perfects delignification, which will happen later. Thereby, this breakdown in structure means that much less bleaching agent was needed, and less poisoned organochlorine was produced (data not shown).
In addition, the prepared SviDyP peroxidase had hardly some cellulase activity (data not shown), thereby it prevented reduction of fiber strength and viscosity of thick liquid. The enzyme did show significant heat and alkali resistance, and could directly and effectively attack lignin. Therefore, SviDyP is applicable to the process of pre-bleaching paper pulp for industrial production, and shows excellent bleaching effects. With its wide substrate specificities and thermophilic capabilities, SviDyP peroxidase is a promising enzyme with considerable biotechnological and commercial potential, especially in the pulp and paper industry. Figure S1 Model structure of SviDyP. Model structure of SviDyP generated using template sequences from putative uncharacterized protein Sco3963 from Streptomyces coelicolor A3 (2) (PDB 4gt2A, GI: 541881521), whose amino acid sequence was 45.56% identical to SviDyP. The a-helices are shown in red and the b-sheets in yellow. (TIF) Figure S2 Paper properties of SviDyP and chemicallytreated eucalyptus kraft pulp. a. paper brightness on various enzyme dosages. b. paper kappa number on various enzyme dosages. c. paper brightness on various time intervals. d. paper kappa number on various time intervals. (TIF)