The First Metriorhynchid Crocodylomorph from the Middle Jurassic of Spain, with Implications for Evolution of the Subclade Rhacheosaurini

Background Marine deposits from the Callovian of Europe have yielded numerous species of metriorhynchid crocodylomorphs. While common in English and French Formations, metriorhynchids are poorly known from the Iberian Peninsula. Twenty years ago an incomplete, but beautifully preserved, skull was discovered from the Middle Callovian of Spain. It is currently the oldest and best preserved metriorhynchid specimen from the Iberian Peninsula. Until now it has never been properly described and its taxonomic affinities remained obscure. Methodology/Principal Findings Here we present a comprehensive description for this specimen and in doing so we refer it to a new genus and species: Maledictosuchus riclaensis. This species is diagnosed by numerous autapomorphies, including: heterodont dentition; tightly interlocking occlusion; lachrymal anterior process excludes the jugal from the preorbital fenestra; orbits longer than supratemporal fenestrae; palatine has two non-midline and one midline anterior processes. Our phylogenetic analysis finds Maledictosuchus riclaensis to be the basal-most known member of Rhacheosaurini (the subclade of increasingly mesopelagic piscivores that includes Cricosaurus and Rhacheosaurus). Conclusions/Significance Our description of Maledictosuchus riclaensis shows that the craniodental morphologies that underpinned the success of Rhacheosaurini in the Late Jurassic and Early Cretaceous, as a result of increasing marine specialization to adaptations for feeding on fast small-bodied prey (i.e. divided and retracted external nares; reorientation of the lateral processes of the frontal; elongate, tubular rostrum; procumbent and non-carinated dentition; high overall tooth count; and dorsolaterally inclined paroccipital processes), first appeared during the Middle Jurassic. Rhacheosaurins were curiously rare in the Middle Jurassic, as only one specimen of Maledictosuchus riclaensis is known (with no representatives discovered from the well-sampled Oxford Clay Formation of England). As such, the feeding/marine adaptations of Rhacheosaurini did not confer an immediate selective advantage upon the group, and it took until the Late Jurassic for this subclade to dominate in Western Europe.

Although the Mesozoic presents a large outcrop in Spain, knowledge of Spanish Mesozoic archosaurs has, unfortunately, been limited. However, in recent years a great effort to document these animals has been made, with the description of an unexpected and diverse fauna of Cretaceous dinosaurs [33]. The Jurassic fossil record is sparse, with the sole exception of the Jurassic-Cretaceous transition which has abundant dinosaur remains [34], [35]. Across the Iberian Peninsula there are exposures of Mesozoic marine sediments; however marine reptiles from these formations are poorly understood [36]. Bardet et al. [37] reviewed the Mesozoic marine reptile fossil record of the Iberian Peninsula, and found that plesiosaurs and mosasaurs were the best represented, and that the marine reptile record had a wide temporal range (Middle Triassic-latest Cretaceous). These fossil remains are mainly represented by isolated and fragmentary specimens (vertebrae, jaw fragments and teeth). Teleosaurid and metriorhynchid thalattosuchians are represented in Jurassic deposits from the Iberian Peninsula [38], [39], but few can be identified at the generic level. However, there is a well-preserved skull from the uppermost Toarcian or lowermost Aalenian (Early or Middle Jurassic) of Portugal described as Pelagosaurus tomarensis [40] (later re-assigned to Mystriosaurus cf. bollensis [41]). Ruiz-Omeñ aca et al. [42] described an isolated ziphodont tooth from Colunga (Asturias, northern Spain) as Dakosaurus sp. (recently reassigned to cf. Plesiosuchus manselii [43]). Furthermore, they [43] cite two other thalattosuchian taxa (cf. Machimosaurus sp. and Thalattosuchia indet.) in the Upper Jurassic Tereñ es Formation.
An incomplete, but exceptionally well preserved skull from Callovian-aged deposits near Ricla (Zaragoza) is also diagnostic. This specimen was discovered by C. Gonzalbo, C. Laplana and M. Soria in 1994 during a prospecting campaign to identify and delimit areas with high numbers of fossils, for either protecting or excavating. This fieldwork was conducted due to the construction of the AVE railway line, which would have made such areas inaccessible. While fragments of bones were preserved in dark limestone nodules, it seems that the skull and three associated vertebrae are an isolated find, as no other vertebrate fossils were discovered at the same level.
This specimen (MPZ 2001/130) is a very famous fossil in the Aragón autonomous community, where it is commonly known as ''Cocodrilo de Ricla'', and has been figured numerous times in popular articles and books ( [44], [45], [46], [47], [48], [49], [50], [51], [52], [53], [54], [55], [56], [57]). It was deposited in the Museo Paleontológico de la Universidad de Zaragoza (MPZ) soon after its discovery in 1994. Initially the skull was identified as a member of the genus Metriorhynchus [44]. More recently, Parrilla-Bel & Canudo [57], in a preliminary study, considered it to be Metriorhynchoidea indeterminate. Until now, this specimen has never been studied in depth. This specimen has important implications for our understanding of metriorhynchid evolution. First, the exquisite preservation of the skull furthers our knowledge of the geometry and craniofacial form of Callovian metriorhynchids, especially as most Callovian specimens have undergone post-mortem distortion and deformation (see Andrews [10]; Lepage et al. [32]). Second, it is the oldest known metriorhynchid from the Iberian Peninsula, and will further elucidate the composition of Jurassic Western European marine ecosystems. Finally, the origins of the metriorhynchid subclade Rhacheosaurini are obscure due to the dearth of specimens from key time stages (such as the Middle Jurassic). Herein we describe a new genus and species, present a revised phylogenetic analysis of the Metriorhynchidae and review the implications this specimen has for the origins of the subclade Rhacheosaurini.

Geological setting
The specimen was collected northwest of Ricla (Zaragoza, Spain), in the ''Barranco de la Paridera'' site (''Ricla 2'' in [58]). Ricla is located in the north-central area of the Iberian Range (Fig. 2) [59]. The Middle Jurassic strata of this area have been the subject of numerous studies (e.g. [60], [61], [62]). The geology of this area is complex due to the presence of condensed sections [63], [64]. The section where the specimen was collected has been interpreted as belonging to the Domeñ o Formation (Chelva Group) by some authors [65], whereas others locate it in the Á greda Formation ( [58] and references therein). In any case, the age of the site is safely determined by associated ammonite fossils (see [66] and references therein).
Following the work of Ramajo [58], which is the only work to our knowledge that actually locates the specimen in a stratigraphic column, the specimen is from the Á greda Formation (contrary to Parrilla-Bel & Canudo [57] who erroneously cited the same source as placing the specimen in the Chelva Formation). Near Ricla this formation consists of alternating muddy and sandy limestones. The Á greda Formation overlies the Chelva Formation in this region, and lies below the Yátova Formation of Oxfordian age. Its thickness changes through its outcrop, being approximately 90 m deep in the Ricla vicinity. The Á greda Formation is interpreted as having been deposited in a shallow marine environment that was subtidal to intertidal. The skull was discovered within a level of alternating grey-beige limestones and grey marlstones, in the upper part of the Á greda Formation. The strata consist of tabular to nodulose, bioclastic and peloidal wackstone to wackstonepackstone facies. The few fossils that are recovered from this level are mainly belemnites, ammonites and bivalves. Bioturbation is abundant, especially at the top of the strata. The specimen was associated with the Middle Callovian ammonite Erymnoceras coronatum (thus in the Erymnoceras coronatum Sub-Mediterranean ammonite Zone).

Nomenclatural Acts
The electronic edition of this article conforms to the requirements of the amended International Code of Zoological Nomenclature, and hence the new names contained herein are available under that Code from the electronic edition of this article. This published work and the nomenclatural acts it contains have been registered in ZooBank, the online registration system for the ICZN. The ZooBank LSIDs (Life Science Identifiers) can be resolved and the associated information viewed through any standard web browser by appending the LSID to the prefix ''http://zoobank.org/''. The LSID for this publication is: urn:lsid:zoobank.org:pub: 0FB0955D-5FAF-47C4-A2BE-114E1DC7D997. The electronic edition of this work was published in a journal with an ISSN, and has been archived and is available from the following digital repositories: PubMed Central, LOCKSS.

Ethics Statement
All necessary permits were obtained for the described study, which complied with all relevant regulations. The specimen was collected with the authorization of the ''Gobierno de Aragón'' (Decreto 6/1990, 23 de enero, de la Diputación General de Aragón; Exp: 197/94). We had permission to look at, and photograph, the relevant collection in the Museo Paleontológico de la Universidad de Zaragoza (MPZ). The director of the Museum (José Ignacio Canudo), whose remit includes fossil crocodylians from the MPZ (MPZ 2001/130), is a co-author on this manuscript. None of these specimens were purchased, donated or loaned as part of this study. MPZ 2001/130 forms part of permanent collection of Museum, in which all fossils are publically owned (Gobierno de Aragón).

Phylogenetic analysis
We undertook a phylogenetic analysis to assess the evolutionary relationships of Maledictosuchus riclaensis within Metriorhynchidae. This analysis was based on the taxon and character dataset of Young et al. [43]. This resulted in a total of 74 taxa coded for 240 characters, with the non-crocodylomorph pseudosuchian archosaur Postosuchus kirkpatricki used as the outgroup taxon. In TNT v1.1 (Willi Hennig Society Edition; [67]) tree-space was searched using new technology search methods in TNT, namely: sectorial search, tree fusion, ratchet and drift; for 1,000 random addition replicates. The default settings for the advanced search methods were changed to increase the iterations of each method per replicate: 100 sectorial search drifting cycles, 100 ratchet iterations, 100 drift cycles and 100 rounds of tree fusion per replicate. This tree-space search procedure was repeated for five different random start seeds. Bremer supports and bootstrap frequencies (1000 bootstrap replicates) were used to assess the robustness of the nodes.
Etymology. ''Damned crocodile from Ricla''. The specific epithet riclaensis denotes the locality where the specimen was found.
Diagnosis. Metriorhynchid crocodylomorph with the following unique combination of characters (autapomorphic characters are indicated by an asterisk): heterodont dentition in which the anterior maxillary teeth are moderately-to-strongly mediolaterally compressed, while the posterior maxillary teeth are subcircular in cross-section; crowns are uncarinated (lack keel). Enamel on labial and lingual surfaces of crowns has ornamentation composed of accessory ridges aligned to the apicobasal axis of the crown. Maxillae hold 30-33 teeth, approximately 18 anterior to the palatines; dentaries have 20-21 teeth adjacent to the mandibular symphysis. Reception pits between the maxillary alveoli, offset slightly laterally on the anterior region of the maxillae and medially on the posterior region of the maxillae, caused by the dentary crowns and reception pits between dentary alveoli caused by the maxillary crowns*. The skull is narrow with a mesorostrine snout (snout contributes 69% of basicranial length). A thin lachrymal anterior process contacts the maxilla, and excludes the jugal from the preorbital fenestra*. Orbits longer than supratemporal fenestra (ch. 42:2)*. Supratemporal fossae subsquare/sub-circular, with subequal anteroposterior and lateromedial axes (ch. 39:1). Approximately 60 degree angle formed by the lateral and medial processes of the frontal (ch. 56:1), with the rostromedial border of the supratemporal fossa (intratemporal flange) rounded. Frontal ornamented with shallow grooves aligned radially (ch. 55:1). Frontal minimum width between orbits in dorsal view subequal to width of one supratemporal fossa (ch. 57:1). Palatine has two non-midline anterior processes and a midline anterior process*. Anterior margin of the choanae is 'W'shaped with its base directed anteriorly (ch. 101:3). Basisphenoid with paired ridges located medially on the ventral surface (ch. 113:1).

Description and Comparisons
Ontogenetic stage and body length estimate. In fossil crocodylomorphs, the progression of vertebral centrum-neural arch fusion is often used as an indicator of ontogenetic stage (e.g. [73]). Neurocentral suture closure in the crocodylian vertebral column follows a consistent pattern, posterior to anterior; with the cervical neurocentral sutures fusing in morphologically mature specimens [73]. The posteroanterior pattern of neurocentral suture closure has been observed in Middle Jurassic metriorhynchids [18]. The vertebrae of Maledictosuchus riclaensis (MPZ 2001/130b, c, d) are still under preparation; however, initial inspection suggests that the centra and neural arches are fused.
The basicranial length of MPZ 2001/130a a is approximately 55 cm, which using the body estimation method outlined by Young et al. [15] gives a total length of 2.95 m. Compared to other metriorhynchine this specimen had a shorter body length than the species within Metriorhynchus, a greater body length than Rhacheosaurus, and is comparable in size to the smaller (and basal-most) species in the genera Cricosaurus (C. suevicus [15] and C saltillense [21]) and Gracilineustes.
Metriorhynchids exhibit ontogenetic variation in rostrum length, tooth shape, orbit size and temporal fenestra/fossa length [28]. As the orbits are longer than the supratemporal fenestra, it would seem that MPZ 2001/130a is a juvenile. However, basicranial length is similar to adult specimens of other metriorhynchine species (.50 cm); the frontal is fused, with no inter-frontal suture or groove present; the proportion of the preorbital length to basicranial length is high (this ratio becomes more pronounced in adult specimens); and the intertympanic foramen is located in a ventral position, more posterior in juveniles [28]. Based on these lines of evidence, and the fused cervical neural arch-centrum, we consider the holotype of Maledictosuchus riclaensis (MPZ 2001/130a) to be a morphologically mature individual.
Skull and mandible: general comments. The holotype (MPZ 2001/130) (Fig. 3) consists of an almost complete skull and part of the lower jaw (MPZ 2001/130a), which were associated with three vertebrae (MPZ 2001/130b, 130c, 130d). While the rostrum is well preserved, the braincase has suffered some erosion, lacking some of the occipital and temporal bones (such as the right supratemporal arch), the posterior processes of the jugals and most of the teeth. Of the lower jaw, only the mandibular symphysis is preserved (dentaries and part of the splenials). In dorsal view, the skull forms an isosceles triangle, with a tapering rostrum without a terminal expansion (such as that observed in teleosaurids, see Andrews [10]). In lateral view the skull is fusiform, with the rostrum lower than the skull table. The rostrum is thin and long. Basicranial length (length from the anterior-most tip of the premaxilla to the posterior-most point of the occipital condyle) is approximately 55 cm, while the rostrum contributes 69% of basicranial length (the length from the tip of the premaxilla to the anterior margin of the orbit is 38 cm). The rostrum is nearly semicylindrical, with its lateral walls almost vertical. From the most anterior point of the nasals, the rostrum becomes broader and the skull reaches its maximal width in the posterior part of the supratemporal fossae. In lateral view the rostrum appears slightly curved, ventrally concave, most likely due to deformation.
The dorsal surface of the skull is gently ornamented with a shallow pitted and grooved pattern. The rostrum (premaxilla and maxilla) has a pitted pattern with small elliptical pits; this pattern becomes slightly more packed (i.e. greater density of pits) on the nasals and the prefrontals. The ornamentation on the frontal is slightly deeper, and is composed of radial grooves (Fig. 4). Except for the prefrontals and the frontal, conspicuous ornamentation is absent on the periorbital bones (the lachrymals, jugals and postorbitals).
Premaxilla and external nares. The premaxillae are 9 cm long along the midline, contributing to 16% of basicranial length, and completely enclose the external nares (Fig. 5). Ornamentation on the external surface is composed of numerous shallow, small elliptical pits and short, fine grooves. Both premaxillae bear three alveoli ( Fig. 6), as with all other metriorhynchids (e.g. [1], [10], [11], [14]). The alveoli are separated by intervals of approximately 5 mm. There are no complete premaxillary teeth. On the left ramus, the teeth are partially preserved. All preserved teeth are procumbent (i.e. the crowns have a slightly forward orientation). Between the premaxillary and maxillary tooth rows there is a diastema of approximately 2 cm.
The maxillary process ( = posterodorsal process) of the premaxilla projects posteriorly, terminating level to the third maxillary alveolus. The premaxilla-maxilla suture is strongly interdigitated dorsally and runs anteroventrally on the lateral surface. There is a slight constriction at the contact between both bones in the ventrolateral region. In palatal view the preservation of the premaxilla is poorer.
Maxilla. Maxillae are very large bones which form the greater part of the rostrum. Ornamentation on the external surface is composed of numerous small elliptical pits and discontinuous grooves oriented anteroposteriorly. The maxillae suture along the dorsal midline, separating the nasals from the premaxillae. This suture is 7 cm long (12% of basicranial skull), anteriorly delimited by the maxillary processes of the premaxillae and posteriorly delimited by the anterior angle of the nasals (Fig. 3A).
In lateral view, the maxillae terminate prior to the anterior margin of the orbits, and their greatest length is along the alveolar border. The alveolar border is arched ventrally, but this is probably due to deformation of the rostrum, and it extends in ventral view from the premaxillae to the jugals (Fig. 3C). The maxillae contact the nasals along their posterodorsal border; the sutures are marked by a shallow groove. Ventral to the nasals, the maxillae contact the lachrymals and the jugals. The maxillae form the anteroventral part of the preorbital fossae (Fig. 7).
In palatal view, the maxillae are poorly preserved. However, the maxillae suture along the midline forming part of the secondary palate. Posteriorly, the maxillae contact the palatines. The maxillapalatine suture is 'W'-shaped, and is orientated posteriorly (Fig. 8). This suture continues posterolaterally, with the maxillae forming the anterolateral border of the suborbital fenestrae (Fig. 3C).
In a previous paper, 34 alveoli were counted [57], but each maxilla has between 30 and 33 alveoli (the posterior region of the maxillae are poorly preserved and the alveoli are hard to identify). Unfortunately, the specimen only has two completely preserved teeth. The morphology of the alveoli varies along the tooth row ( As the ventral surface of the rostrum is concave, the teeth are not horizontally aligned, with the posterior-most maxillary alveoli on the same plane as the premaxilary alveoli. However, as stated above, the snout has experienced post-mortem deformation, so this is unlikely to be an in vivo morphology. Nasals. The nasals are paired, unfused elements. The external surface of the nasals (like maxillae) is ornamented with shallow grooves and pits. In dorsal view the nasals are subtriangular (like all thalattosuchians; e.g. [10]), broad, and extensively contribute to the upper surface of the rostrum (Fig. 3A, B). Along their anterior margin the nasals contact the maxillae; thus being separated from the premaxillae. Along their posterior margin the nasals contact the frontal, this suture tapers to a point, forming a 'V'-shape pointing anteriorly. This suture forms an angle of approximately 12 degrees with anteroposterior axis of the skull and bends posteriorly to the prefrontals ( = dorsoposterior processes) (Fig. 10). The interdigitated nasal-prefrontal suture extends anterolaterally on the dorsal surface of the snout and curves posteriorly on the lateral surface.
The nasals are broadly exposed on the lateral surface of the skull, forming an acute process beneath the prefrontals ( = lateroposterior processes) (Fig. 7). The lateroposterior processes terminate posterior to the preorbital fossae and form the dorsal margin of the preorbital fossae. These processes contact the lachrymals ventrally and the prefrontals dorsally. Lachrymals. The lachrymals are only exposed on the lateral surfaces of the rostrum, in front of the orbits. This is a consequence of the lateral expansion of the nasals and prefrontals, a morphology that is characteristic of all metriorhynchids [10], [11], [14], [74]. The lachrymals are concave with a lightly ornamented external surface with very shallow grooves (i.e. no conspicuous ornamentation). The posterior margins of the lachrymals contribute to the anterior margins of the orbits, forming the lower third. There are sutural contacts with the both the prefrontals and nasals dorsally, with the jugals ventrally, and a small contact with the maxillae anteriorly (Fig. 7).
Along the lachrymal-prefrontal contact there is an anteroposteriorly orientated crest or ridge (best preserved on the right side). This ridge lies within a depressed area, anterior to the orbit but posterior to the preorbital fenestra. Young & Andrade [1] named this the lachrymal-prefrontal fossa. These fossae are restricted to the concave, lateral surfaces of the lachrymals and the prefrontals. Both the fossae and the crests are metriorhynchid apomorphies [1].
Anteriorly, the lachrymals contact the maxillae. The contact between these elements is very small, and is approximately level to the anterior termini of the jugal anterior processes. In other metriorhynchids (e.g. Geosaurus giganteus, Cricosaurus araucanensis; see figures in Young & Andrade [1]) the lachrymals are excluded from the maxillae by the preorbital fossae and the nasal lateroposterior processes (i.e. not by a jugal-nasal contact). However, in Maledictosuchus riclaensis there is a thin anterior process of the lachrymal that continues anteriorly, ventral to the preorbital fenestra. This anterior process contacts the jugal along its ventral margin. This process results in a contact between the lachrymal  Anatomical abbreviations: j, jugal; la, lachrymal; ma, maxilla; na, nasal; orb, orbit; pfe, preorbital fenestra; pfo, preorbital fossa; prf, prefrontal. doi:10.1371/journal.pone.0054275.g007 and the maxilla, which excludes the jugal from the preorbital fenestra, and limits the involvement of the jugal with the preorbital fossa (Fig. 7). A similar arrangement occurs in Cricosaurus schroederi ([1]: figure 5b). However, instead of thin lachrymal anterior processes, in this species these processes are wide, much wider than the jugal anterior processes. These broad lachrymal anterior processes results in much more extensive contact between the lachrymals and maxillae in C. schroederi [75].
Prefrontals. As with all other metriorhynchids, the prefrontals are enlarged laterally and overhang the orbits [10], [11], [14].   These elements have two distinct regions: an upper portion, which extends over the lateral margin of the orbit, and a downwardly deflected region. This upper region overhangs the anterior third of the orbit (overhanging by approximately 50% of the width of the prefrontal). This overhang is extensive, as in dorsal view, it exceeds the jugal bar laterally (Figs. 3, 10). The dorsal ( = external) surface of this upper region is ornamented with pits and short shallow grooves (Fig. 4).
In dorsal view, the prefrontals are teardrop shaped with the apex directed anteriorly, and the inflection point on the outer (lateral) margins project posteriorly, forming an angle of approximately 75 degrees to the anteroposterior axis of the skull. In dorsal view the prefrontals are twice as long as wide; their maximal length is 10 cm, while their maximal width is 5 cm. The medial borders of the upper region contact the frontal posteriorly and the nasal anteriorly (Fig. 10). The anterior end of the prefrontals fits between the dorsoposterior and lateroposterior nasal processes (see Fig. 3C). The nasal-prefrontal suture extends anterolaterally on the dorsal surface and curves posteriorly on the lateral surfaces of the snout. The nasals terminate level to the anterior border of the lachrymal-prefrontal fossae. The prefrontal-frontal sutures start at approximately the anterior third of the orbit dorsal margins. These sutures run straight from their respective orbital margin, and are almost perpendicular to the anteroposterior axis for about 1.6 mm, and then they curve anteriorly.
Frontal. The external surface is slightly concave and has a more conspicuous ornamentation pattern than the other cranial bones, being composed of subcircular pits and radial grooves (Fig. 4). Anteriorly, the frontal terminates in a wedge-shaped process ( = anteromedial process) that extends between the nasal dorsoposterior processes. This suture forms a 12 degree angle with the sagittal plane and bends posteriorly to contact the prefrontals. Posterior to the naso-frontal suture, the frontal contacts the prefrontals. Posteriorly the frontal has a medial process that contacts the parietal, and two lateral processes that contact the postorbitals. The participation of the frontal in the dorsal margin of the orbits is reduced due to the expansion of the prefrontals and the postorbitals. The minimum interorbital distance across the frontal is 6 cm, while the maximal is 10 cm (Fig. 10).
The suture between the frontal lateral processes and the postorbitals is a posterolaterally directed V-shape. These lateral processes constitute the posterior margins of the orbits and the anterior margins of the supratemporal fenestrae. The medial process of the frontal contacts the parietal forming the intertemporal bar ( = frontoparietal bar) between supratemporal fossae. The frontoparietal suture is interdigitating with a central V-shape pointing anteriorly. This suture is located slightly anterior to the midpoint of the intertemporal bar. The lateral and medial processes of the frontal form an angle of 60 degrees with one another (Fig. 10).
Squamosals. Only the left squamosal is preserved; however, its dorsal surface is partially eroded. The squamosal forms the posterolateral border of the supratemporal fossa (Figs. 3, 10). The anterior process of the squamosal is short, and contacts the postorbital forming the posterior part of the supratemporal arch. This arch is markedly narrow, a characteristic of all thalattosuchians (e.g. [10]). Along its posteromedial edge ( = medial process), the squamosal contacts the parietal. The medial process is orientated slightly posterolaterally, and is briefly exposed on the occipital surface of the skull. The medial and lateral processes of the squamosal meet at a nearly right angle (forming the posterolateral corner of the supratemporal fossa).
The boundaries between the squamosal and the parietal, exoccipital and quadrate are unclear; the sutural contacts are missing either due to fusion or poor preservation. The squamosal has a distinct lateral subcircular surface, which is slightly anterolateral to the paroccipital process (Fig. 11). This surface is smooth and slightly concave, and is orientated posterolaterally (Fig. 11). This morphology is also present in Cricosaurus araucanensis, Metriorhynchus and Dakosaurus andiniensis [74].
Parietal. The parietal, as with all crocodylomorphs, has fused into a single element [74] and forms the posterior and medial margins of the supratemporal fossae, and together with the frontal constitutes the intertemporal bar. The parietal constitutes slightly more than 50% of the intertemporal bar. The intertemporal bar becomes narrower along its length, so that the frontal contribution is noticeably wider than the parietal contribution (Fig. 10). In lateral view the intertemporal bar is convex, higher than the anterior region of the frontal, and is the dorsal-most region of the skull (Fig. 12). The anterior process of the parietal is narrow and has a midline longitudinal groove on the dorsal surface, which could be evidence of a midline suture (CT scanning will be needed to confirm this). Posteriorly, the anterior process becomes noticeably wider, and in dorsal view is triangular in shape with a convex posterior margin (Fig. 10). The parietal has two lateral processes that contact the squamosals, however, the sutures are difficult to observe. In occipital view, the parietal contacts the supraoccipital along its ventral margin (Fig. 3D).
Supratemporal fossae/fenestrae. Due to the infill of matrix, the supratemporal fenestrae are obscured. The supratemporal fossae are large, forming most of the skull roof, and are subtrapezoidal in shape. The margins of each fossa are formed anteriorly by the frontal, anterolaterally by the postorbital, posterolaterally by the squamosal and posteromedially by the parietal (Fig. 10). The intratemporal flange [76] cannot be observed due to matrix. The fossae are slightly shorter than the orbits. The longest axis is anteromedially -posterolaterally directed and is 10 cm long; the shortest axis is perpendicular to the longest axis and is 7 cm long. The medial margins are 7.5 cm long, and the posterior margins are 7 cm long. The minimum distance between the fossae is located in the posterior third of the intertemporal bar, and is less than 1 cm. Both the posterolateral and posteromedial corners are rounded, and form acute and obtuse angles, respectively; the anteromedial and anterolateral corners form angles of approximately 60 and 120 degrees, respectively. The squamosal-parietal bar (forming the posterior margin) is slightly oriented posterolaterally, and it is lower than the intertemporal bar (Fig. 12).
Preorbital fossae/fenestrae. Herein we follow hypothesis two of Fernández & Herrera [77], in which the antorbital cavities are internalised in metriorhynchids. The openings classically referred as the ''antorbital fenestrae'' in this clade is in fact neomorphic preorbital openings for the excretion of salt. These openings are connected via ducts to a chamber that housed large salt-glands (see [12], [13], [77], [78]). Both preorbital fenestrae are bound by an elongate, narrow and obliquely orientated fossa, which in turn are bound by the jugal, the lachrymal, the nasal and the maxilla. The fenestrae themselves are bound by the lachrymals and the nasals (Fig. 7).
Orbits. The orbits are oval, large, and are orientated laterally. This is in contrast to the smaller, dorsolaterally oriented orbits of teleosaurids (e.g. Steneosaurus leedsi; [10]), and the smaller slightly more lateral orbits of basal metriorhynchoids (e.g. Teleidosaurus calvadosii; NHMUK PV R2681). With a height of 6.5 cm, and maximal length of 10 cm, the orbits are larger than the supratemporal fossae (7.5 cm long). The lengths of the orbits are approximately 18% of basicranial length. As with all other metriorhynchids, the prefrontals expand laterally over the dorsal rim of the orbits (e.g. [10], [11], [14]). The anterior rim of the orbits are bound by the prefrontal and the lachrymal; the ventral rim is exclusively bound by the jugal; the posterior rim is bound by the postorbital, and slightly by the ascending process of the jugal; and the dorsal rim is bound by the prefrontal, frontal and the postorbital (Fig. 12). As there is still matrix within the orbits, we cannot determine the presence of sclerotic rings. In the Callovian basal metriorhynchine Metriorhynchus superciliosus the sclerotic rings are rarely preserved and never complete (e.g. GLAHM V983, GLAHM V987; Hunterian Museum, Glasgow, United Kingdom).
Infratemporal fenestrae. The infratemporal fenestrae ( = laterotemporal fenestrae) are not well preserved. The quadratojugals and the posterior process of the jugals, which together bound the fenestrae ventrolaterally, are missing. Although these bones are missing, the extent of the fenestrae seems to be small in comparison with the orbits: their length would have been less than half of the orbital length. In addition, their height would also have been shorter than the orbital height (Fig. 12).
Jugals. The jugals are incomplete in MPZ 2001/130a. The posterior processes of both left and right jugals are missing. The ascending processes are very short, being largely indistinguishable from the main body of the jugal. The ascending processes contact the postorbitals (Fig. 12). The anterior processes are slender and slightly compressed. Under the orbits, the jugals are distinctly laterally compressed with an almost rectangular cross section.
Under the right orbit, the jugal is slightly undulate, probably due to deformation. Anterior to the orbits, the anterior processes are very slightly sigmoidal, although not as strongly sigmoidal as Dakosaurus andiniensis [74]. The anterior processes extend further anteriorly than the prefrontals and the lachrymals (Fig. 7). The lachrymals contact the dorsal margin of the jugal anterior processes, while the ventral margin contacts the maxillae. The jugals lack conspicuous ornamentation and neurovascular foramina.
Quadratojugals. Both of the quadratojugals are missing.
Postorbitals. Both postorbitals are preserved. In lateral view (Fig. 12), both postorbitals are 'T'-shaped, being composed of the frontal process, squamosal process and the postorbital bar ( = descending process). The frontal process is anteromedially directed, contacts the lateral process of the frontal and forms the anterolateral part of the supratemporal fossa. The squamosal process of the postorbital forms the lateral part of the supratemporal arch, and contacts the squamosal. When observed in lateral view, the postorbital is strongly arched, making it noticeably concave on its dorsal surface. This results in the supratemporal arch being significantly lower than the intertemporal bar.
The postorbital descends ventrally to form the postorbital bar, and contacts the jugal through an undulating suture that is posteroventrally to anterodorsally directed. The external surface of  Anatomical abbreviations: fr, frontal; itf, infratemporal fenestra; j, jugal; la, lachrymal; oca, otic canal; orb, orbit; pa, parietal; po, postorbital; prf, prefrontal; qu, quadrate; sof, suborbital fenestra; sq, squamosal; sqs, squamosal flat surface; stf, supratemporal fenestra. doi:10.1371/journal.pone.0054275.g012 the postorbital bar lacks ornamentation. The upper part of the postorbital bar projects laterally, and together with the frontal processes constitutes the widest part of the cranium. On the lateral surface of the postorbital bar there is a ridge that extends onto the squamosal process.
Supraoccipital. The supraoccipital is only exposed on the occipital surface of the skull. Its external or occipital surface is slightly concave. The supraoccipital contacts the parietal dorsally (with a horizontal dentate suture) and the exoccipital ventrally by a dentate suture. It is excluded from participating in the foramen magnum by the exoccipital (Fig. 3D). Post-temporal openings ( = post-temporal fenestra; post-temporal foramen) on the occipital surface of the skull are not present. The size and presence of these openings are variable in metriorhynchids, even within species (see [79]: 373).
Exoccipital. The occipital surface of the skull is broken, with a large arched crack occurring dorsal to the occipital condyle. The right portion of the exoccipital has not been preserved and has been reconstructed. Whether due to preservation or fusion, the sutures between the exoccipital and the basicranium are difficult to observe. Dorsally, the exoccipital contacts the supraoccipital by a gently concave dentate suture, and laterodorsally it contacts the squamosals and parietal (Fig. 3D). There is a gentle rim below the exoccipital-supraoccipital suture, just above the foramen magnum. Ventrally, the exoccipital would have contacted the basioccipital. However, due to post-mortem damage the sutures are unclear, and it seems that the exoccipital was excluded from the occipital condyle.
The exoccipital forms the greatest part of the occipital surface of the skull. Dorsal to the paroccipital processes, it is slightly concave. The left (and only preserved) paroccipital process is broken, but it would have been orientated dorsolaterally at an approximate 45 degree angle (Fig. 3D). This is very different from that observed in other Callovian metriorhynchids, such as Metriorhynchus superciliosus (e.g. NHMUK PV R6859) and Gracilineustes leedsi (e.g. NHMUK PV R3014) as they have horizontal paroccipital processes. The skulls referred to ''Metriorhynchus'' brachyrhynchus are generally very strongly dorsoventrally compressed, but the left paroccipital process of NHMUK PV R3804 has a slight dorsolateral orientation. Dorsolaterally orientated paroccipital processes are a characteristic of the subclade Rhacheosaurini (see supplementary material and appendices of Young & Andrade [1]; Young et al. [16]). The ventral surface of the paroccipital process forms a crest that overhangs a recess for the cranioquadrate canal. The cranioquadrate canal is elongated and obliquely oriented (Fig. 11). The exoccipital extends ventrolaterally to this canal and contacts the quadrate. The cranioquadrate canal is separated from the otic canal by the exoccipital, quadrate and squamosal, a condition also observed in other metriorhynchids (Dakosaurus, Cricosaurus and Metriorhynchus; [74], [79], [80]). Additionally, the exoccipital bears the foramen magnum, which is partially preserved. Its maximum width is 13 mm. Ventrolateral to the occipital condyle there are two large foramina (for the internal carotid arteries) with a diameter of approximately 7 mm (Fig. 3D). Preservation makes determining the positions of the foramina for the cranial nerves difficult.
Quadrate. The left quadrate is nearly entirely missing and the right quadrate is not complete (Fig. 3D). The quadrate contacts the squamosal dorsally, the ventrolateral region of the exoccipital posterodorsally, and closes the otic aperture (external auditory opening). This region is best preserved on the left side (Fig. 11). In ventral view, the quadrate contacts the pterygoid and basisphenoid (Fig. 13).
Basioccipital. The basioccipital forms the ventromedial part of the occiput. Due to the fracturing in this region, the sutures are unclear. However, it would have contacted the exoccipital dorsolaterally. As the sutures of basioccipital-exoccipital contact are unclear, it seems as though the occipital condyle is formed solely by the basioccipital. The occipital condyle is subcircular in occipital view, and its neck is distinct, short and perpendicular to the occipital plane. The basioccipital has two processes that extend ventrolaterally that form the basal tubera (Fig. 3D). Between them, the ventral margin is deeply notched along the midline. Anterior to this is the Eustachian ( = pharyngotympanic) foramen (Fig. 11).
Basisphenoid. The basisphenoid contacts the basioccipital posteriorly, and forms the anterior part of the Eustachian foramen (Fig. 13). The walls of the foramen converge anteriorly on the midline forming a small double ridge. Anteriorly and laterally, the basisphenoid unites with the pterygoids.
Palatines and internal nares. The palatines are exposed on the palatal surface of the skull. They suture along the skull midline and together with the palatal shelves of the premaxillae and maxillae form the secondary palate. The palatines have two lateral non-midline anterior processes in addition to a midline anterior process. The two non-midline anterior processes are a metriorhynchine apomorphy [1]; however, Maledictosuchus riclaensis is the only known specimen that has these two lateral processes and a third midline process as well (Fig. 8). The lateral, non-midline, processes originate at the anterior border of the suborbital fenestrae, and remain separate from the alveolar borders. Anteriorly, the three processes meet the palatal branches of the  maxillae approximately level to the 18 th maxillary alveoli, and the palatal branches of the maxillae reach posteriorly approximately level to the 20 th maxillary alveoli. Posteriorly, the palatines delimit the anterior margins of the internal nares, and posterolaterally form the medial borders of the suborbital fenestrae (Fig. 13). There are two long grooves (one on each side of the central suture) parallel to the anteroposterior axis of the skull (Fig. 8).
The anterior margin of the internal nares is formed by the palatines (that enclose the nares ventrally) and is W-shaped. Posterodorsally the internal nares are enclosed by pterygoid ventral surface (Fig. 13). The surface of the pterygoid is ventrally concave not at the same level as the anterior margin of the choanae (in ventral view it is deeper than palatine surface), and therefore the choanae are posteriorly open.
Pterygoids. The pterygoids are exposed on the palatal surface. They are fused into a single element. The palatal surface is large, rounded and deeply concave. Along their anterior margin, the pterygoids contact the palatines. The pterygoids form the lateral and dorsal walls of the choanae (Fig. 13). The internal nares are filled with sediment and it is not possible to determinate the anterior extension of the pterygoids within the nasopharyngeal canal. Along the posterior margin, the pterygoids contact the basisphenoid, and posterolaterally they contact the quadrates (Fig. 13). On both sides of the choana are the pterygoid flanges, which are horizontally orientated and form the posteromedial borders of the suborbital fenestrae. The pterygoid flanges contact the ectopterygoids; however, the sutures between these two elements are unclear (Fig. 13).
Parasphenoid. There is a small double pterygoid ridge on the midline (Fig. 13). According to Andrews [10] this structure is the parasphenoid. Whether this determination is correct must await further study and CT-scanning.
Ectopterygoids. The ectopterygoids are thin bones, only visible in palatal view, that separate the suborbital fenestrae from the infratemporal fenestrae (Fig. 13). While the sutures are unclear, the ectopterygoids contact the pterygoids medially and the jugals laterally.
Suborbital fenestrae. The suborbital fenestrae are elongated and teardrop-shaped, pointing anteriorly. The anteroposterior length of each fenestra is approximately 9 cm and its maximal width 3.5 cm. The fenestrae begin approximately level to the 27 th maxillary alveoli, and do not extend anterior to the orbits. Their medial borders are formed by the palatines, while their lateral borders are formed by the maxillae and jugals, and the posterior borders by the ectopterygoids and pterygoids (Figs. 3C, 13).
Dentaries. The dentaries are well preserved, including the mandibular symphysis. The alveolar border and the tip of the symphysis are eroded, and the morphologies of the alveoli are badly preserved. According to Vignaud [28], the number of teeth anterior to the splenial is a good indicator of the total number of teeth. As 21 alveoli are adjacent to the mandibular symphysis, and thirteen anterior to the splenials, we estimate that the dentaries would have had 26-27 teeth. The alveoli are irregularly spaced. The anterior dentary teeth are partially preserved. They are procumbent, conical, without carina and lingually curved. Further back in the tooth row there are incomplete teeth, which preserve regions of enamel. All teeth have apicobasally aligned ridges. The posterior alveoli are larger and labiolingually compressed (Fig. 14).
Furthermore, there are reception pits on the dentary that are inline with the alveoli (and positioned between them). Most of the reception pits are small and subcircular, but some are pronounced (as grooves), especially between the fifth and sixth, and sixth and seventh right dentary alveoli.
Splenials. The splenials form the dorsal-posterior region of the mandibular symphysis, terminating anteriorly level to the 14 th dentary alveoli (Fig. 14).
Dentition: tooth morphology. The dentition of MPZ 2001/ 130a is poorly preserved, but the variation in alveolar morphology along the tooth row suggests heterodonty (Fig. 6). The three premaxillary teeth are slightly procumbent, especially PM1. The four anterior-most maxillary alveoli are larger and mediolaterally compressed. At the mid-snout the alveoli are subcircular and subequal in size. The five posterior-most maxillary alveoli are smaller, circular, and very closely packed. Along the dentary tooth row the teeth (visible either on the teeth sections or on the alveoli) become larger and more mediolaterally compressed. The dentary teeth are also procumbent, the anterior teeth are subcircular and outwardly orientated, while the more posterior teeth are mediolaterally compressed and less outwardly orientated. The interalveolar spaces are irregular in size in both the maxilla/premaxilla and the dentary.
Dentition: type of occlusion. In Maledictosuchus riclaensis there are reception pits (caused by the dentary tooth crowns) along the maxillary tooth row, and along the dentary tooth row (caused by maxillary teeth) (Fig. 9). In the upper jaw the reception pits are between the maxillary alveoli. Up to M11 they are offset laterally; and between M18 and M25 (posterior to a region badly preserved) the reception pits are smaller and offset medially (Fig. 6). On the lower jaw, the reception pits are in-line between the dentary alveoli (Fig. 14). This arrangement of reception pits is unique in Metriorhynchidae with the presence of: (1) vertically orientated maxillary teeth (although the anterior-most are slight procumbent), as evidenced by the in-line dentary reception pits; (2) procumbent and outwardly orientated dentary crowns, as evidenced by the laterally-offset reception pits on the anteriorregion of the maxillae; and (3) vertically orientated posterior dentary crowns, as evidenced by the medially-offset reception pits on the posterior-region of the maxillae (Fig. 9).
Dentition: ornamentation, carinae and wear. Tooth enamel ornamentation is composed of apicobasally aligned ridges. The ornamentation on a replacement tooth (D8) is conspicuous and well defined, however on other teeth the ridges are of lower relief. As there are no completely preserved tooth crowns, we cannot determine how the ornamentation varies along the crown or if these ridges are continuous or discontinuous; however, in other metriorhynchid species these ridges do not continue along the entire length of the crown [18], [81]. The enamel ornamentation has no contribution from the underlying dentine (Fig. 15). Split or supernumerary carinae were not found on any tooth, nor is there any evidence for true, or false-ziphodont serrations.

Phylogenetic Results
In the first (unordered) phylogenetic analysis, 8 most parsimonious cladograms were recovered (length = 638, CI = 0.497, RI = 0.857, RC = 0.426). The topology of the strict consensus (Fig. 16) is identical to that of Young et al. [43] with the exception of the inclusion of Maledictosuchus riclaensis. The unordered analysis results in a large polytomy at the base of Rhacheosaurini just as in Young et al. [43]. Maledictosuchus riclaensis is recovered within this polytomy.
The second (ordered) phylogenetic analysis returned 194 most parsimonious cladograms (length = 679, CI = 0.473, RI = 0.860, RC = 0.407). The strict consensus had a significant loss of resolution among the non-metriorhynchid species in the ordered analysis compared to the unordered analysis. However, the phylogenetic relationships within Rhacheosaurini are significantly more resolved, in stark contrast to the polytomy recovered in the unordered analysis. Maledictosuchus is found to be the basal-most member of Rhacheosaurini (Fig. 17). The position of Maledictosuchus within Rhacheosaurini is well supported as it shares the following rhacheosaurin synapomorphies:

1)
Posterior retraction of the external nares (Character 7:3) 2) Presence of a premaxillary septum (Character 9:1) 3) Frontal-postorbital suture lower than the intertemporal bar (Character 60:1) 4) Infratemporal fenestra shorter in length than the orbit (Character 86:2) 5) Uncarinated teeth (Character 167:0) 6) Paroccipital processes dorsolaterally inclined (Character 104:1; see below) The clade Rhacheosaurini has numerous post-cranial apomorphies. However, Maledictosuchus riclaensis only preserves three vertebrae. As such, we cannot determine whether the currently known rhacheosaurin post-cranial apomorphies define the entire clade, or a more inclusive subclade. We have chosen to retain all the post-cranial apomorphies in the diagnosis of Rhacheosaurini (see above), but only future discoveries including the post-cranial skeleton of Maledictosuchus or other basal rhacheosaurins can elucidate this subject.
Interestingly, the evolutionary relationships within Rhacheosaurini are now less well-resolved than in previous analyses. All previous incarnations of this dataset that included both Rhacheosaurus gracilis and Metriorhynchinae indet. from Cuba (USNM 419640) have found USNM 419640 to be basal to Rhacheosaurus [1], [15]. This relationship however, was based on a single character: character 104, in which USNM 419640 is coded [0], whereas all other rhacheosaurins are coded [1] (this character describes the re-orientation of the paroccipital processes from  being horizontal [0] to dorsolaterally inclined [1]). Maledictosuchus, here found to be basal to both taxa, shares the derived condition with all other Rhacheosaurini (it has the paroccipital process dorsolaterally oriented at a 45 degree angle). This suggests that the horizontal orientation of the paroccipital processes in USNM 419640 is either a reversal or the specimen was incorrectly coded (a possibility as the skull is poorly preserved, especially in that region, and the acid preparation it received further damaged the specimen).

Discussion
Based on the description and phylogenetic analysis presented above, we show that MPZ 2001/130a is a new taxon. Maledictosuchus riclaensis gen. et sp. nov. is characterized by a unique combination of characters (see Diagnosis).

Comparative anatomy
Maledictosuchus riclaensis can be swiftly identified as a metriorhynchid due to its large, ellipsoid orbits that are lateral in position; the enlarged prefrontals that overhang the anterior portion of the orbits; the lachrymals being restricted to the lateral margin of the skull; intertemporal bar that is wider anteriorly (at the frontal contribution) than posteriorly (at the parietal); and the frontalpostorbital suture being ''V-shaped'' and directed posteriorly. It can be referred to the Metriorhynchinae as it has the following features: long and tubular rostrum; high maxillary tooth count (.20 per maxilla); procumbent teeth; small lachrymals (less than 40% of orbit height); and the palatines have two lateral, nonmidline anterior processes.
Within Metriorhynchinae Maledictosuchus riclaensis is found to be the basal-most known member of Rhacheosaurini. It shares with all other rhacheosaurins six synapomorphies (see Phylogenetic Results). Interestingly, Maledictosuchus riclaensis shares some cranial characteristics with basal metriorhynchines such as Metriorhynchus and Gracilineustes: greater proportion of the premaxilla posterior to the external nares, and the prefrontals are larger and expand further laterally than other rhacheosaurins. As such, Maledictosuchus riclaensis has a mosaic of derived and basal metriorhynchine craniofacial characteristics.
The angle between medial and lateral posterior processes of the frontal is acute (,60 degrees), this morphology is similar to derived species within Metriorhynchus (the Late Jurassic M. hastifer [32]), and derived geosaurines (such as Neptunidraco ammoniticus and many species within Geosaurini; [17], [43]). However, derived rhacheosaurins, such as Cricosaurus, have a more acute angle of ,40-45 degrees [1], [14], [76]. This again supports Maledictosuchus riclaensis as an intermediate between basal metriorhynchines and derived rhacheosaurins. As with derived geosaurines (Neptunidraco, Torvoneustes, Geosaurus and Dakosaurus; [17], [43]) the interorbital frontal width of Maledictosuchus riclaensis is subequal to the width of one supratemporal fossa. However, in those taxa this morphology is formed by the expansion of the supratemporal fenestrae; by contrast, in Maledictosuchus riclaensis the orbits excavate a deeper supraorbital curve than in other metriorhynchines, thus narrowing the frontal.
Compared to the contemporaneous metriorhynchids in the Oxford Clay Formation (OCF) of England Maledictosuchus riclaensis is distinct (Table 1). It shares a very high tooth count with Gracilineustes leedsi (.30 teeth per maxilla and 18-20 dentary teeth adjacent to the mandibular symphysis). However, Maledictosuchus riclaensis lacks the characteristic smooth cranial bones (including a smooth frontal) of G. leedsi ( [10]; NHMUK Leeds Collection). This high tooth count is noticeably higher than the other OCF species (Maledictosuchus riclaensis tooth count has approximately five more teeth than the upper maximum of Metriorhynchus superciliosus for both the upper and lower jaws; Table 1). Furthermore, all OCF species have dentition that is bicarinate (continuous carinae on the mesial and distal margins; [18], Table 1), whereas Maledictosuchus riclaensis lacks carinae. The geosaurine species can be further distinguished as their carinae possess true denticles [18]. The orientations of the paroccipital processes are horizontal in the OCF species (although as noted above, that could be due to preservation, especially for ''Metriorhynchus'' brachyrhynchus), whereas they are dorsolaterally inclined in Maledictosuchus riclaensis. The palatine of Maledictosuchus riclaensis is also distinct, as it not only possesses the two lateral, non-midline anterior processes seen in Metriorhynchus superciliosus and G. leedsi [43], but has a third midline process as well (Fig. 8). The geosaurine ''Metriorhynchus'' brachyrhynchus only has a midline anterior process of the palatine [10]. The internal nares are divided by a septum, giving the anterior margin of the choanae a ''W-shape'' with its base directed anteriorly, much like ''Metriorhynchus'' brachyrhynchus ( [10]; however it must be noted that the palates of OCF metriorhynchids are rarely well-preserved and this morphology could be present in M. superciliosus and G. leedsi). Finally, the nasal cavity of Maledictosuchus riclaensis is divided by a premaxillary septum resulting in the external nares being orientated more laterally than in the OCF species (there are no rhacheosaurins in the OCF).

Marine specialisation in Rhacheosaurini
Within Rhacheosaurini there is a suite of cranial characteristics that Young et al. [14] hypothesized were linked to increasing marine specialization: 1) external nares that are divided by a midline premaxillary septum, 2) posterodorsal retraction of the external nares, and 3) posterior reorientation of the lateral processes of the frontal, and the consequent formation of an acute angle between the medial and lateral processes of the frontal. The divided external nares is hypothesized to be an adaptation for more efficient respiratory airflow [20], while the posterodorsal retraction of the external nares is observed in clades with sustained swimmers (e.g. ichthyosaurs and cetaceans; see [82] and references therein). The re-orientation of the lateral processes of the frontal is involved in cranial streamlining [14], [76]. These three characteristics are, to a greater or lesser degree, exhibited by Maledictosuchus riclaensis, and are absent in contemporaneous OCF species (Table 1; [10]; [14]; NHMUK Leeds Collection). Prior to the discovery of Maledictosuchus riclaensis, the oldest known metriorhynchid that exhibited this suite of adaptations was the Late Kimmeridgian Cricosaurus suevicus [11], [70]. As such, the evolution of greater marine specialization and the shift towards a mesopelagic, open-sea, lifestyle began approximately 10 Ma earlier than previously supposed during the Middle Jurassic (Middle Callovian).

Specialised piscivory/teuthophagy in Rhacheosaurini
Recent analyses based on the evolution of skull strength in metriorhynchids have shown that rhacheosaurins had low strength skulls not suited to feeding on large-bodied prey [14], [16], [83]. Furthermore, most species within this group have an elongate, tubular rostrum, with procumbent and non-carinated dentition, and a high overall tooth count. However, Tithonian specimens of Cricosaurus saltillense [21] and Cricosaurus sp. [19], and the Valanginian species Cricosaurus macrospondylus [20], had carinated and more vertically orientated dentition. In most rhacheosaurins, the lack of cutting edges on the dentition, the teeth orientated forward in the mouth and a tubular low-strength rostrum is in marked contrast to the contemporaneous subclade Geosaurini which had: high-strength brevirostrine-mesorostrine rostra, carinated and serrated dentition, vertically orientated tooth crowns positioned to maximize shear, a low overall tooth count (,15 teeth per maxilla and dentary) and an increased gape [14], [16], [18], [43], [81], [83], [84]. The stark difference in craniodental morphologies between these two subclades has led to hypotheses of niche partitioning and ecological specialization, with rhacheosaurins more suited to feeding on small, fast moving prey [14], [16], [83], [85]. While basal metriorhynchines such as Metriorhynchus superciliosus and Gracilineustes leedsi are similar in having a high tooth count and a tubular rostrum (Table 1), Maledictosuchus riclaensis is the oldest known metriorhynchine with non-carinated teeth.
Moreover, as with other rhacheosaurins, Maledictosuchus riclaensis shares a more verticalised squamosal, and dorsolaterally inclined paroccipital processes [14]. We hypothesise that these adaptations would have resulted in increased fibre lengths for the M. depressor mandibulae, and thus increased jaw-closing velocity. Such an adaptation would have facilitated capture of small, fast-moving prey.
The occlusion mechanism of Maledictosuchus riclaensis is unique among metriorhynchids, as it combines tightly-packed vertically orientated/slightly procumbent upper jaw teeth with procumbent/outwardly orientated lower jaw teeth. Coupled with the tubular rostrum and non-carinated teeth, these features suggest that this species had an occlusion mechanism adapted for impaling and securely holding small prey items (such as fish and cephalopods). Another Callovian species (see Table 1), the ''Mr Leeds' specimen'' (GLAHM V972, the new generic name is currently in press), also has maxillary teeth that are 'in-line locking' (with in-line reception pits between the dentary alveoli); however, this taxon has enlarged dentition that is both carinated and serrated, and has an increased gape [18]. A third Callovian species, ''Metriorhynchus'' brachyrhynchus, has pronounced reception pits on the lateral margins of the dentary created by the upper jaw dentition [18]. It would appear that the high species diversity of metriorhynchids in the Callovian of Europe co-occurs with a high diversity of craniodental morphologies and distinct occlusion mechanisms, thereby enabling niche partitioning and ecological/ trophic specialisation.

Callovian diversification of metriorhynchids
Based upon recent re-examination of fossil specimens from the Callovian of Europe, the key craniodental adaptations that characterize the derived Geosaurini and Rhacheosaurini evolved during the Middle Jurassic. The description of the ''Mr Leeds' specimen'' (GLAHM V972) has highlighted that the adaptations that underpinned the success of the large-bodied macrophagous Geosaurini in the Late Jurassic and Early Cretaceous first appeared during the Callovian [18]. Here, we have shown that the craniodental morphologies that underpinned the success of Rhacheosaurini in the Late Jurassic and Early Cretaceous (from increasing marine specialization to adaptations for feeding on small-bodied prey) also first appeared during the Callovian.
Of all the marine Callovian formations of Europe, the OCF is the best represented and most studied. The ecosystem is dominated by Metriorhynchus superciliosus (with 50+ specimens), while Gracilineustes leedsi is known from approximately 12 specimens ( [10]; NHMUK Leeds Collection and GLAHM Leeds Collection). The short/broad-snouted species ''Metriorhynchus'' brachyrhynchus, ''Mr Leeds' specimen'' and Suchodus durobrivensis are collectively known from approximately 20 individuals [18]. Note that the validity of these species is currently being investigated by one of us (MTY). In the OCF Maledictosuchus riclaensis is absent. In the Oxford Clay Sea, basal rhacheosaurins and geosaurins were curiously rare/absent. It would appear that the feeding/marine adaptations both groups evolved did not confer immediate selective advantage upon them, and it took until the Late Jurassic for these two subclades to dominate in Western Europe [14]. However, another possibility is that the sister taxa and basal members of the subclades Geosaurini and Rhacheosaurini were more common, and radiated, in deeper water. Possible evidence for this is Neptunidraco ammoniticus, a Bajocian/Bathonian taxon known from the Tethys Ocean. Neptunidraco is the oldest known metriorhynchid with a streamlined skull (posterolaterally reorientated lateral processes of the frontal); with a skull more streamlined than most younger Callovian species [17].
Whether the Late Jurassic-Early Cretaceous dominance of Rhacheosaurini and Geosaurini was due to selective advantage and out-competing more basal metriorhynchids or due to opportunistic replacement after climatic shifts (e.g. of sea temperature, sea level and/or marine fauna) currently cannot be determined.

Conclusions
Upon re-examination of an understudied skull from the Callovian of Spain, the morphological and taxonomic diversity of Middle Jurassic metriorhynchids is found to be greater than previously realised. The phylogenetic analysis presented here clearly shows that the new species we describe is the basal-most member of Rhacheosaurini, a lineage of increasingly mesopelagic piscivores. Herein we emend the diagnosis for this clade.
Maledictosuchus riclaensis gen. et sp. nov. represents a morphological intermediate between basal metriorhynchines and the derived Late Jurassic members of Rhacheosaurini, possessing a mosaic of basal and derived craniodental characteristics. While it is a morphologically intermediate, it was contemporaneous in age with the basal metriorhynchines of Europe (M. superciliosus and G. leedsi). Maledictosuchus riclaensis is the oldest known rhacheosaurin, and is currently the oldest and best preserved metriorhynchid specimen from the Iberian Peninsula. Alongside with the recent description of the ''Mr Leeds' specimen'' from the Callovian of England, we now have evidence that the evolution of derived metriorhynchids (subclades Geosaurini and Rhacheosaurini) began during the Middle Jurassic. While their craniodental morphologies evolved in a mosaic manner, the key adaptations that enabled their evolutionary radiations in the Late Jurassic (e.g. cranial streamlining, feeding related dentition characters) first appear approximately 10 million years earlier.

Supporting Information
Text S1 Character by taxon matrix used in the phylogenetic analysis (tnt file). (TXT)