Viscoelastic Properties of Differentiating Blood Cells Are Fate- and Function-Dependent

Although cellular mechanical properties are known to alter during stem cell differentiation, understanding of the functional relevance of such alterations is incomplete. Here, we show that during the course of differentiation of human myeloid precursor cells into three different lineages, the cells alter their viscoelastic properties, measured using an optical stretcher, to suit their ultimate fate and function. Myeloid cells circulating in blood have to be advected through constrictions in blood vessels, engendering the need for compliance at short time-scales (<seconds). Intriguingly, only the two circulating myeloid cell types have increased short time scale compliance and flow better through microfluidic constrictions. Moreover, all three differentiated cell types reduce their steady-state viscosity by more than 50% and show over 140% relative increase in their ability to migrate through tissue-like pores at long time-scales (>minutes), compared to undifferentiated cells. These findings suggest that reduction in steady-state viscosity is a physiological adaptation for enhanced migration through tissues. Our results indicate that the material properties of cells define their function, can be used as a cell differentiation marker and could serve as target for novel therapies.


Introduction
Biological cells are viscoelastic materials with a wide range of adaptable mechanical properties [1,2]. Cellular mechanical properties are known to alter in disease [3] and during physiological processes such as differentiation [4], motility [5], cell cycle [6] and apoptosis [7]. However, understanding of the functional relevance of such alterations in cell mechanics is incomplete. As stem cells differentiate into specialized cells, not only are their mechanical properties modulated but many of their biochemical characteristics are altered as well. Thus, common methods for monitoring differentiation take advantage of the biochemical changes involving gene expression and protein synthesis [8]. Such methods include RNA microarrays, reverse transcription polymerase chain reactions, blotting techniques and immunofluorescent labeling in flow cytometry and microscopy [9]. Despite their success in unraveling some of the molecular pathways involved in differentiation, these methods are not ideally suited because they all rely on external markers, such as fluorescent antibodies, potentially causing unwanted signaling and altering cell properties, or they are destructive. Moreover, cells are seen as mere loci where biochemistry happens, largely ignoring that they are actually material objects having to navigate a 3D physical environment.
The material properties of cells have thus recently moved into the focus of characterization. Changes in the mechanical properties of stem cells as they differentiate have been reported and most results show an increase in stiffness with differentiation, congruent with a build-up of the cells' cytoskeleton [4,10,11]. However, there are some cell types that do not become stiffer with differentiation. For instance, differentiated neutrophils are more compliant than their undifferentiated hematopoietic precursors [5]. These contrary trends pose the obvious question, whether there is a general underlying principle in the evolution of material properties of cells during differentiation?
To address this question, we tracked mechanical changes when the well-established model human myeloid precursor cells, HL60 [12], were differentiated in vitro into three mature lineages: neutrophils, monocytes and macrophages. In vivo, all three lineages ultimately originate from the same hematopoietic stem cells (HSCs) residing in the bone marrow [13]. There, HSCs undergo self-renewal and differentiation, giving rise to red blood cells, white blood cells and platelets, which are the cellular constituents of blood [13]. White blood cells, or leukocytes, are part of the immune system, which protects and defends the body against infections and the spread of tumors. Neutrophils, monocytes and macrophages are the main leukocytes that collaborate in destroying invading pathogens. In a normal adult, over 5-10610 10 neutrophils are produced in the bone marrow daily [14]. These circulate through the blood for a few hours until activated by chemical signals to extravasate into tissues where they carry out crucial antimicrobial activities at sites of infections including the phagocytosis of pathogens. Monocytes also circulate through blood vessels and extravasate into tissues in response to infection. Once they enter tissues, monocytes become macrophages [15]. The macrophages are phagocytes present in almost all human tissues, where they engulf and digest pathogens and dead cells. Unlike neutrophils, which can survive in tissues for only a few days, macrophages can survive for months and are therefore called resident macrophages. Thus, neutrophils, monocytes and macrophages have to deal with different physical challenges in their microenvironments and probably have to adjust their mechanical properties accordingly.
Here we show that all three mature lineages can be distinguished from the undifferentiated cells and from one another based on a single material property, the creep compliance. We further demonstrate that the ensuing material properties are actually tailored towards the ultimate function of the cells. Moreover, we find the same, but larger characteristic differences in compliance between primary human HSCs (CD34+ cells), primary human neutrophils and monocytes, confirming the physiological importance of the findings from the cell line model.

Compliance of myeloid cells is lineage-specific
To measure the compliance of cells that are normally in suspension in their physiological environment, a method that preserves this suspended state is required. Here, we used a microfluidic optical stretcher (OS), which is a specific dual-beam trap, capable of inducing well-defined stresses on whole single cells in suspension and therefore useful for measuring overall cell deformability and creep compliance [16,17]. For details, see the Methods section. Briefly, the OS consists of two diverging, counter-propagating Gaussian laser beams, which emanate from single-mode optical fibres (Fig. 1A). During a typical experiment, cells are introduced into a microfluidic delivery system, serially trapped and then stretched along the laser beam axis (Fig. 1B). The time-dependent strain is extracted from the video camera images, normalized by the peak stress applied and a geometric factor [18], to obtain the creep compliance for each cell. For the cell shown, the peak compliance (at t = 4 s) is 0.08360.005 Pa 21 .
The precursor (HL60) cells are induced to differentiate using standard protocols (see Methods and Methods S1) and then repeatedly measured with the microfluidic OS over the course of several days to track the evolution of their viscoelastic properties. Mature neutrophil-and monocyte-like cells are obtained from HL60 cells 72-96 hours after induction of differentiation. Macrophage-like cells are obtained from 24 hours after induction of differentiation. Our results show that a creep compliance measurement distinguishes between these three cell lineages following differentiation to mature cells (Fig. 1C, D). For all three lineages, the peak compliance at t = 4 s of stretching and the entire compliance profile are significantly different from undifferentiated cells (p,0.0001). Moreover, even though both neutrophils and monocytes become more compliant, we still find significant differences between both their peak compliances and their entire compliance profiles (p,0.01). These lineage-specific differences in compliance are reproducible at higher stresses and in different OS set-ups with varying geometries (Fig. S2). Of note, concomitant changes in cell size during differentiation (Fig. S3) are explicitly considered in the geometric factor F g , which is used for the proper normalization of the compliance. Thus, the creep compliance is a true material property of these cells and can be used as sensitive yet robust, non-invasive and inherent physical marker to monitor differentiation and even lineage specification.

Lineage-specificity is reflected in detailed viscoelastic properties
To gain new insights into cell biological function using cell material properties further analysis of the compliance results is required. We employed both basic mechanical and power law models to extract detailed viscoelastic parameters ( Fig. 2A; see also Fig. S4 and Methods S1). The equation for the power law model that fitted the data best required an offset A, where J(t) is the time-dependent compliance, J o is the initial compliance, t 0 = 1 s and b is the power law exponent. The lineage specific modulation of compliance found in the raw compliance curves ( (Fig. 2B). The exponent b is nearly constant for monocytes, distinguishing them from neutrophils. Since power law models assume time scale independence, which may not generally hold for biological cells, we also used specific viscoelastic models for fitting to the compliance data. The bestfitting viscoelastic model for undifferentiated HL60 cells, and differentiated neutrophils and monocytes was the so-called Burgers' model (B), while the best-fitting model for macrophages was the standard linear liquid model, where E 1 describes the instantaneous elastic response found in all cell types except macrophages. The mere fact that macrophages are mechanically best represented by a liquid model, while the other cells have a more solid character, further emphasizes the emerging differences. The last term in equations (2) and (3) determines the transient response, which was found in all cell types. Clearly, it is possible to obtain the steady-state viscosity, g 1 , when the transient response becomes constant. For comparisons, we focused on the fit parameters found in all cell types, namely, the transient and steady-state parameters, and found the characteristic time-scales, t, at which cells change their viscoelastic behaviour ( Fig. 2C and Fig. 2D, respectively). Here, t is given by the ratio of transient viscosity, g 2 , and elasticity, E 2 . The undifferentiated cells had a transition time of t<7 s. For monocytes and neutrophils, t was 5 s but not significantly different from undifferentiated cells. For macrophages it was over 15 s, and was different from all other cell types (p,0.05) reflecting a reduced elasticity, E 2 . Regarding the steady-state viscosity, g 1 , all three differentiated cell types showed over 50% reduction compared to the precursor cells (Fig.  2D). For macrophages, g 1 = 174.0610.2 Pa s, while neutrophils and monocytes had g 1 = 212.5643.3 Pa s and 142.1644.7 Pa s, respectively. It is intriguing that we cannot obtain g 1 for undifferentiated cells within the 4 s of stretching but can do so for the differentiated cells. Extrapolating the viscoelastic model up to 20 s predicts a steadystate viscosity of over 300 Pa s for the undifferentiated cells. To obtain their steady-state viscosity directly within the actual data range, we carried out 20 s creep tests for the undifferentiated cells (N = 3 experiments) and found g 1 = 333.5626 Pa s, which is more than 50% higher than the values for all three differentiated cell types. The lower g 1 of all differentiated cells implies that beyond some transient regime, all three differentiated cells should be more compliant than undifferentiated cells. We therefore validated this implication by also performing 20 s creep tests for macrophages, which are less compliant than undifferentiated cells at the 4 s creep testing. Indeed, the macrophages are significantly more compliant at 20 s creep testing (Fig. 2E). Succinctly, monocytes and neutrophils are elastically compliant cells at short time-scales. The lower steady-state viscosity is an apparent indication of their 'latent' fluid-like behavior at long time-scales. Macrophages, on the other hand, are generally more fluid-like cells and are less compliant than undifferentiated cells at short time-scales but more compliant at long time-scales.

Material properties of cells are function-dependent
These distinct rheological properties, robustly emerging towards the respective end of the differentiation into the mature phenotypes, suggest an intriguing hypothesis, where the material properties might be physical prerequisites for specific functions of the mature cell types. After all, circulating neutrophils and monocytes have to repeatedly squeeze through microvasculature constrictions smaller than their diameter while being advected along at high speed [19] (Fig. 3Aa). Since these are rapid impact processes, the cells need to be elastically compliant at short timescales (,1 s), which the macrophages are not. To test this prediction we used pressures in the physiological range (5-20 mbar) to send cells through channels in PDMS with inner crosssections of 10 mm612 mm and 12 mm612 mm, fabricated by photolithography [20] using PDMS (see Methods S1). To pass through the 12 mm612 mm channel at a pressure of 20 mbar, macrophages required an average advection time (from entry to exit) of 3.9861.77 s, an order of magnitude longer than all other cell types ( Fig. 3B; p,0.05). At this pressure, macrophages could hardly be advected at all through the narrower 10 mm612 mm channel (see Video S1) although all other cell types went through (see Video S2) even at a lower pressure of 10 mbar (Fig. S5). However, macrophages treated with 2 mM cytochalasin D, which depolymerizes filamentous actin [21], were 40% more compliant (Fig. 4A) and had an average advection time of 0.3460.11 s, which is not significantly different from those of neutrophils, monocytes and precursors (Fig. 3B). These results confirm that cell compliance is the major limiting factor controlling the rapid passage of cells through narrow constrictions at short time-scales. As phagocytes, all three mature cell types respond to microbial infection and so have to migrate to and through tissues to sites of infection. The crowded environment of tissues, as well as the absence of fluid pressure as the driving force (as in blood), makes tissue migration a process occurring at much longer time-scales (Fig. 3A). To test whether the cells' material properties are also in line with this second cell function, we compared the migratory ability of the three mature cell types with that of their precursors in Boyden chamber assays [5], where cells have to squeeze actively through a thick, porous membrane ( Fig. 3C and Methods S1). After 3 h, more cells of all three differentiated lineages had migrated through the pores than the undifferentiated cells. Of interest, macrophages and monocytes (which ultimately become macrophages in vivo) both showed a higher relative increase in migration ability of 204% and 194%, respectively, compared to 145% for neutrophils (Fig. 3C). It is quite remarkable that an in vitro migration assay, which mimics in vivo migration in tissue over long times, correlates with the lowered steady-state viscosity of differentiated myeloid cells. The obvious interpretation is that the lowered steady-state viscosity is a physical prerequisite for 'flowing' through tissues over long time-scales (Fig. 3A). The fact that macrophages do not retain the high compliance of monocytes at short time-scales suggests an adaptation of their mechanical property to their cellular niche: they are tissue-resident cells and squeezing through tissue is a long-time process which does not require short-time compliance. These in vivo exigencies appear to explain our results, engendering insights into cell circulation and migration behaviour. In fact, recent in vitro studies show that matrix structural configuration determines 3D migration modes of human macrophages [22]. Our results therefore suggest novel cell mechanical-property-based therapeutic targets for blood/immune system dysfunctions where aberrant circulatory and migratory functions of neutrophils and monocytes/macrophages are implicated, such as sepsis [23], artherosclerosis [15] and chronic obstructive pulmonary disease [24].

Confirmation of results with functional assays and primary cells
To ascertain the biological relevance of our results we tested whether the compliance measured is dictated by the cytoskeleton of cells, by disrupting filamentous actin using cytochalasin D. Factin is a major determinant of cellular mechanical properties in vitro and in vivo [25]. Indeed, in all cell types we found over 40% increase in compliance due to actin depolymerization (Fig. 4A). Also the transition time dropped from 5 s or 15 s to less than 0.8 s in all cell types (Fig. S6).
Furthermore, we carried out myeloid functional assays on the differentiated cells using the chemo-attractant N-formyl-methionine-leucine-phenylalanine (fMLP). In vivo monocytes, neutrophils and macrophages express membrane receptors for bacterial fMLP which allow them to respond to chemotactic gradients, while fMLP-mediated chemotaxis is not detectable with undifferentiated HL60 cells [26]. Indeed, all three differentiated cells types (but not the undifferentiated cells) showed altered mechanical properties in response to in vitro fMLP treatment (Fig. 4B).
Since cell lines are only models of primary cells, we also measured and compared the compliance of primary human hematopoietic stem cells (CD34+) with in vitro differentiated CD34+ cells as well as with primary human neutrophils and monocytes. Consistent with the cell line results, the primary human neutrophils and the CD34+-derived neutrophils were respectively 3-fold and 4-fold more compliant than primary CD34+ stem cells (Fig. 4C). The primary monocytes were also significantly more compliant than primary stem cells (Fig. S7). Furthermore, macrophages derived from the differentiation of CD34+ stem cells were significantly (p,0.01) less compliant than undifferentiated CD34+ stem cells (Fig. S8). Of note, since monocytes turn into macrophages in vivo, we also measured primary monocytes before and after they had turned into macrophages in culture and found the latter to be 40% less compliant than the monocytes, consistent with all other results reported above. Thus, cell compliance is a lineage-specific characteristic material property of both cell lines and primary myeloid cells.

Discussion
We have shown that differentiating myeloid precursor cells modulate their viscoelastic properties in a lineage-specific manner. This is in line with some previous studies on the modulation of mechanical properties during stem cell differentiation. Increase in deformability and reduction in viscosity were found when HL60 cells were induced to differentiate along the neutrophil lineage [27]. Beyond blood cells, distinct viscoelastic properties have been found in primary chondrocytes, osteoblasts and adipocytes on one hand and primary mesenchymal stem cells on the other, but no differentiation of the latter was carried out [11]. Recently, changes in mechanical properties similar to those reported for primary cells [11] were obtained during in vitro osteogenic and adipogenic differentiation of mesenchymal stem cells [10]. In general, the functional relevance of changes in viscoelastic properties of differentiating cells reported in these and similar studies remained speculative and unclear. A critical step in this regard was made when the regulatory role of cell compliance for long time migration was confirmed for neutrophils [5]. However, this could not be linked with lineage specificity since there were no other lineages to compare with. In this paper, we present what is to our knowledge, the first multilineage demonstration of fate specificity and functional relevance of the viscoelastic properties of differentiating stem/ precursor cells.
Measuring the mechanical properties of whole single cells in a non-contact way is not trivial. Tactile contact with the measuring probe such as AFM tips can create artifacts due to cell adhesive properties [28]. Optical stretching is contact-free and assesses cell mechanics in suspension -mimicking the circulatory phase environment of monocytes and neutrophils. The integration of the optical stretcher with microfluidic delivery of cells allows rapid measurement of large numbers of cells, which in turn enables the expedient tracking of time-dependent processes such as differentiation by many repeated measurements on short, well-defined time points over the course of days. The fact that cells in suspension assume a near spherical shape has the added benefit that cell size can be determined and tracked very accurately (see Fig. S3), which is much more involved in an attached state. Moreover, mechanical phenotyping using the OS works on a single-cell level, which is important as cell response, for example to TNF-a, has recently been shown as a binary, stochastic process, which had previously been obscured in bulk measurements [29]. An apparent limitation of this method relates to macrophages, which have to be detached from a substrate for measurement in the suspended state. Yet, it is remarkable that we are able to make accurate predictions of cellular function in an attached state (migration in peripheral tissue) by analyzing the mechanical properties measured when these cells are in suspension. An interesting recent technological development in this regard is the use of hydrodynamic stretching for screening even larger cell populations in a short amount of time [30]. Mechanical properties have even been shown to be predictive for the differentiation potential of certain stem cells [31].
Of course, cell mechanics is rooted in the molecular make-up of the cell. Cell mechanical properties are determined by the cytoskeleton, an interconnected network of filamentous polymers and regulatory proteins, which links the membrane through the cytoplasm to the nucleus and gives the cell physical integrity [25]. Recent biochemical work has provided a catalogue of cytoskeletal proteins that are up-or down-regulated during the differentiation of HL60 cells into neutrophils, monocytes and macrophages [32]. It was found that undifferentiated cells, neutrophils and monocytes, but not macrophages, are deficient in nesprin-1 and -2 giant isoforms, SUN1, vimentin, plectin and lamins A/C while actin and SUN2 are present [32,33]. How the material properties of biological cells derive from these cytoskeletal details is still largely unknown and a topic of intense research effort [1,2]. Nevertheless, our findings demonstrate that the emergent mechanical properties of cells are robust and able to distinguish between lineages.

Conclusions
We have demonstrated the lineage-and function-specificity of the viscoelastic properties of differentiating stem/precursor cells. The lineage-specificity enables monitoring stem cell differentiation by mechanical phenotyping. The function-specificity shows the importance of material properties for understanding cell biology.
Our results indicate that cell mechanical properties constitute a defining feature of cell biological function and can be used as an inherent, sensitive marker for monitoring differentiation and as a novel therapeutic target to interfere with aberrant cell migration and circulation behaviour.

Ethics Statement
Ethical approval was obtained from the Cambridgeshire 2 Research Ethics Committee, and written informed consent, or written assent from next-of-kin where appropriate, were obtained in all cases in accordance with the Declaration of Helsinki.

Cell culture and differentiation
We used HL-60/S4 cells [34], a rapidly differentiating clone or sub-line of HL-60 cells, as a model for myeloid differentiation. The cell line was a gift from Donald and Ada Olins of the Department of Pharmaceutical Sciences, College of Pharmacy, University of New England. Cells were cultured and induced to differentiate along the myeloid lineage following well-established protocols [33]. Differentiation was confirmed in various ways (see Methods S1 and Fig. S1). Primary human neutrophils and monocytes were isolated from peripheral blood taken from healthy donors at the Department of Medicine, Addenbrooke's Hospital, University of Cambridge. Human cord blood-derived CD34+ stem cells were obtained from Translational Research Laboratory, Department of Haematology, University of Cambridge. Details of cell culture and differentiation for both the cell line model and primary HSCs as well as the preparation of primary neutrophils and monocytes can be found in Methods S1.

Optical stretching and determination of creep compliance
The principle, setup and handling of the optical stretcher have been described previously [5,16,35]. The forces that trap and deform the cell outwardly along the surface arise from the change in the refractive index at the cell-medium interface and the ensuing conservation of momentum [36]. The axial strain during optical stretching is given by where a o is the semi-major axis of the unstretched cell and a(t) is the time-varying semi-major axis measured (Fig. 1B). The optical stress on the cells is computed using an electromagnetic wave model [37], which requires knowledge of the cells' average refractive index. We measured the refractive index of the cells during differentiation using a digital holographic microscope [38]. The strain is normalized by the peak value of the calculated optical stress s 0 and a geometric factor F g to give the creep compliance.
The geometric factor is calculated as described elsewhere [18] to account for cell size and stress distribution. Of note, cell size changes characteristically upon differentiation (see Fig. S3). Thus, by this normalization the mechanical properties reported here are decoupled from the variation in the dielectric characteristics and in the size of cells during differentiation.

Statistical analysis
For each cell type or treatment condition the number of cells per OS experiment was n$30. Compliance data are presented as mean 6 SEM. Representative compliance data were chosen from total number of independent experiments, N.5 for all cell lines and N$3 for primary cells. Overall, the number of individual cells analyzed totaled about 5000. The rheological parameters J o and b were confirmed in two independent experiments. For each cell type or treatment condition the number of cells per advection experiment was n.20. Advection times are representative of 3 independent experiments and are presented as mean 6 SEM. Statistical comparisons for all experiments were done using oneway ANOVA in Origin (OriginLab Corporation, Northampton, MA, USA), to account for multiple groups. Within ANOVA, significant differences were reported only where at least three different means comparison tests (Tukey, Bonferroni and Dunn-Sidak) simultaneously showed such differences. All box plots include whiskers at 5-95% range, horizontal box lines at 25-75% range, median line and the mean (inset box). In the parametric fitting 95% confidence intervals were computed, and extracted parameters were considered significant where confidence intervals did not include 0. All curve fitting was performed using Matlab (Mathworks, Natwick, MA).

Supporting Information
Methods S1 (DOCX) Figure S1 Nuclear morphology as further proof of differentiation and cell viability during differentiation. A. Representative confocal images (single slices) of cells stained with a green fluorescent cytoplasmic dye (Mitotracker Orange) and a red fluorescent nuclear dye (Syto 61). Neutrophils have lobulated nuclei (bands and segmented), usually 3-5 lobes but all lobes are not always visible in a 2D image. Monocytes have bean-shaped or 'horse-shoe'-like nuclei and macrophages have bean-shaped or round nuclei. The undifferentiated cells have large round or large rough-edged nuclei. B. Neutrophils derived from the differentiation of primary human CD34+ stem cells also have lobulated nuclei. C. Cell viability during differentiation of HL60 cells. All macrophages were obtained at 24 h after induction, hence the low viability at 72 h after. D. Cell viability during differentiation of CD34+ SCs. Viability was low on day 1 (71%) but rose to about 99% from days 12 to 15 when neutrophils were present. However, Annexin V (green) and Propidium Iodide (red) stains indicate 10% apoptosis, as expected due to the presence of short-lived neutrophils. All scale bars in A, B and D are 10 mm. (TIF) Figure S2 Distribution of creep compliance and stressas well as set-up independence of lineage specificity in creep compliance. A. The histograms show the distribution of peak compliance (at t = 4 s) for the HL60 and all differentiated lineages plotted in Fig. 1C. Although the populations overlap there are significant shifts in compliance (decrease to the left for macrophages and increase to the right for monocytes and neutrophils). B. Lineage specific differences in creep compliance measured at a higher power of 0.9 W per fibre almost identical to differences obtained at 0.7 W per fibre (Fig. 1C) illustrating the stress-independence of lineage specificity in creep compliance. For HL60, n = 62, neutrophils (Neu), n = 70, monocytes (Mono), n = 53 and macrophages (Mac), n = 41. C. Lineage-specificity in compliance is also reproduced in an OS set-up with a different geometry. Here, HL60, n = 40, neutrophils, n = 37, monocytes, n = 37 and macrophages, n = 36. It is quite impressive how few cells need to be measured to be able to distinguish the various lineages based on creep compliance. D.  Figure S7 Primary stem cells (CD34+) are less compliant than primary monocytes and have highly reproducible viscoelastic properties across different healthy donors. A. CD34+SCs are less compliant than primary monocytes. B. Box plots for the results of A, showing highly significant difference (p,0.0001). C. Primary CD34+ stem cells from different donors show highly reproducible strains in OS measurements at 0.9 W per fibre. As in Fig. 2D and E, few cells were required to obtain reproducible results (for donors 1, 2 and 3, n = 27, 45, 36, respectively), a fact that is not trivial for diagnostic applications, considering that stem cells are very rare. Also, this near absence of variation in compliance of CD34+SCs from healthy donors suggests that OS is probably capable of discerning dysfunctional states in human populations. (TIF) Figure S8 Macrophages derived from primary stem cells (CD34+) are less compliant than undifferentiated CD34+ stem cells. A. Upon differentiation, CD34+ derived macrophages (CD34+ pMac, n = 32) become less compliant than undifferentiated CD34+SCs (n = 45). B. Box plots for the results of A, showing significant difference (p,0.01). (TIF) Video S1 Short time scale advection of macrophages through microfluidic channels. Macrophages obviously need quite some time to deform before they can slip through. Video presented in real time. (WMV) Video S2 Short time scale advection of monocytes through microfluidic channels. Monocytes need much less time than the macrophages in Video S1 to slip through the same channels and at the same driving pressure. Video presented in real time. (WMV)