Aeromonas Surface Glucan Attached through the O-Antigen Ligase Represents a New Way to Obtain UDP-Glucose

We previously reported that A. hydrophila GalU mutants were still able to produce UDP-glucose introduced as a glucose residue in their lipopolysaccharide core. In this study, we found the unique origin of this UDP-glucose from a branched α-glucan surface polysaccharide. This glucan, surface attached through the O-antigen ligase (WaaL), is common to the mesophilic Aeromonas strains tested. The Aeromonas glucan is produced by the action of the glycogen synthase (GlgA) and the UDP-Glc pyrophosphorylase (GlgC), the latter wrongly indicated as an ADP-Glc pyrophosphorylase in the Aeromonas genomes available. The Aeromonas glycogen synthase is able to react with UDP or ADP-glucose, which is not the case of E. coli glycogen synthase only reacting with ADP-glucose. The Aeromonas surface glucan has a role enhancing biofilm formation. Finally, for the first time to our knowledge, a clear preference on behalf of bacterial survival and pathogenesis is observed when choosing to produce one or other surface saccharide molecules to produce (lipopolysaccharide core or glucan).


Introduction
Mechanisms of glycogen formation have been largely studied for Escherichia coli [1]. Glucose-1-phosphate is the early precursor for glycogen synthesis, and it is first converted to ADP-glucose (ADP-Glc) in a reversible reaction catalyzed by ADP-glucose pyrophosphorylase (EC 2.7.7.27). The glucosyl unit of ADP-Glc is transferred to the nonreducing end of an a-1,4-glucan chain by glycogen synthase (EC 2.4.1.21), and a-1,6 linkages are generated by a branching enzyme (EC 2.4.1.18). UDP-glucose (UDP-Glc) is considered to be the glucosyl donor for glycogen synthesis in mammalian cells. Either ADP-Glc or UDP-Glc can serve as glucosyl donors in eukaryotic microorganisms and Plants [2].
A. hydrophyla galU mutants are unable to synthesize UDP-Glc from glucose-1-phosphate and UTP [3]. Besides its function as a substrate for glucosyltransferases resulting in glucosylated surface structures, UDP-Glc plays a well-established biochemical role as a glycosyl donor in the enzymatic biosynthesis of carbohydrates. The LPS from several Aeromonas galU mutants, either growing in rich or minimal media with glucose as a single carbon source, showed the absence of the O-antigen LPS and a LPS-core with higher electrophoretic mobility (two bands) as compared with the corresponding unique band of their respective wild type strains LPS-core [3]. Taking advantage of the complete determined LPS structure of strain AH-3 (serotype O34) [4,5] ( Figure 1A), it appears that the two LPS bands from AH-3 galU mutant correspond to one (the major product represented by the slowmigrating LPS band on the gels) which is the complete LPS-core but devoid of Gal residue in the outer core where the O34-antigen LPS is attached; and the other (the minor product represented by the fast-migrating LPS band on the gels) with a deeply truncated LPS-core structure restricted to one Kdo and and three L-glycero-Dmanno-heptose (LD-Hep) residues (see Figure 1B). The low amount of UDP-Glc in the mutant respect to the wild type explains its inability to complete the LPS-core structure. In a reduced number of the LPS molecules the mutant is unable to transfer the Glc residue to the inner-core, and the LPS-core is not further extended ( Figure 1B). In the majority of the LPS-core molecules, the mutant is able to incorporate the Glc residue to the inner core and part of the outer core is added (major LPS-core product, see Figure 1B). However, even in this case the mutant is unable to complete the LPS-core because it can not incorporate the terminal Gal residue, probably because as mentioned before in the mutant the amount of UDP-Glc is too low [3]. The lack of Gal residue explains why the mutant is unable to express the O34-antigen LPS, because this residue links the O:34-antigen LPS [3]. Complementation with the single A. hydrophila galU gene completely restored all the LPS defects [3].
In this work we show the origin of the UDP-Glc obtained by the A. hydrophila strain AH-3 GalU mutant through the presence of a surface polysaccharide (glucan), which represents a new way to obtain UDP-Glc in Aeromonas strains. This surface Aeromonas glucan seems to play a role in biofilm formation.

Aeromonas Hydrophila Strains Produce a Cell-surface Polysaccharide (Glucan)
A material containing cell-surface carbohydrates (LPS and a polysaccharide) was isolated from A. hydrophila strain AH-3 by the phenol-water extraction following digestion of cells with RNAse, DNAse and Proteinase K as described [4]. It was degraded with 1% acetic acid to cleave the lipid moiety of the LPS, and the resultant water-soluble (carbohydrate) material was fractionated by gel-permeation chromatography on Sephadex G-50 to yield glucan (eluted first) and then parts of the LPS: O-polysaccharide (O-antigen) and core oligosaccharide (Figure 2A).
Sugar analysis of glucan showed the presence of D-glucose (Glc) only. The D configuration of glucose was established by Figure 1. LPS of Aeromonas hydrophila AH-3. (A) Chemical structure of the LPS-core of A. hydrophila strain AH-3 [36]. The O34-antigen is linked to the Gal residue (shown in italics) of the LPS core [36]. (B) Silver-stained SDS-PAGE of purified LPS from A. hydrophila strain AH-3 (lane 1) and GalU mutant AH-2886 (lane 2) and structures of the two LPS-core bands of AH-2886 mutant [3]. All monosaccharides are in the pyranose form. Kdo, 3deoxy-D-manno-OCT-2-ulosonic acid; L-a-D-Hep, D-a-D-Hep, L-glycero-and D-glycero-a-D-manno-heptose; Glc, glucose; GlcN, glucosamine; Gal, galactose. C = LPS core, O = O34-antigen LPS. doi:10.1371/journal.pone.0035707.g001 GLC analysis of the acetylated (+)-2-octyl glycosides as described [5]. GLC was performed using an Agilent 7820A GC system and a temperature program from 160uC (1 min) to 290uC at 7uC min -1 . Methylation analysis of glucan revealed terminal Glc, 4substituted Glc and 4,6-disubstituted Glc in a ratio of 1:5:1. Therefore, glucan is a branched polysaccharide. The 1 H-and 13 C-NMR spectra of glucan were assigned using two-dimensional 1 H, 1 H homonuclear and 1 H, 13 C heteronuclear correlation spectroscopy (COSY, TOCSY, HSQC, HSQC-TOCSY). They indicated that all glucose residues are a-linked; particularly, this followed from chemical shifts 4.95-5.35 ppm for H-1 and 99.9-101.3 ppm for C-1. The 13 C-NMR spectrum showed also that ,20% Glc residues are terminal (characteristic chemical shifts 71.0 ppm for C-4 and 62.4 ppm for C-6) and the rest are either 4-substituted (chemical shifts 79.2 ppm for C-4 and 62.3 ppm for C-6) or 4,6-disubstituted (chemical shifts 79.2 ppm for C-4 and 69.2 ppm for C-6). These data are in full agreement with methylation analysis data. A two-dimensional nuclear Overhauser effect NMR experiment showed that all terminal Glc residues are linked to position 4 of 4-substituted (or 4,6disubstituted) Glc residues and none of them is linked to position 6 of 4,6-disubstituted Glc residues. 4-Substituted Glc residues are linked either to position 4 of 4-substituted (or 4,6-disubstituted) Glc residues or to position 6 of 4,6-disubstituted Glc residues. Based on these data together, the glucan structure can be represented as shown in Figure 3.
A RmlB mutant (AH-3DrmlB) devoid of O34-antigen LPS because the absence of 6-deoxy-L-talose [4] showed the presence of glucan in the soluble fraction after chromatography on Sephadex G-50 like the wild type strain AH-3, but not the O34antigen LPS ( Figure 2B). WecP is the enzyme that catalyzes the  transfer of Nacetylgalactosamine to undecaprenyl phosphate to initiate the O-antigen lipopolysaccharide (LPS) biosynthesis [6]. No glucan or O34-antigen LPS [7] was obtained from the AH-3DwecP mutant cell surface ( Figure 2C). WaaL is the enzyme that ligates the O-antigen LPS to the LPS-core [8]. The AH-3DwaaL mutant (AH-3D3.1 in [8]) showed no glucan or O34-antigen LPS.
When we studied different A. hydrophila wild type strains from different O-antigen serotypes, like for instance strain AH-1 (O11) or PPD134/91 (O18), we isolated a glucan polysaccharide identical to the one obtained from strain AH-3. In all these cases this glucan eluted before the LPS domains (O-polysaccharide and core oligosaccharide), independently of the O-antigen type (data not shown).

The Glucan and the GalU Mutants
The AH-3 galU mutant (AH-2886) was devoid of the O34antigen and showed two types of LPS structures corresponding to the two LPS bands on gels ( Figure 1) [3]. When we tested for the presence of the glucan in the cell surface of AH-2886 mutant, we were unable to detect any polysaccharide by chromatography on Sephadex G-50 of the soluble fraction from the acid hydrolyzed phenol-water extract.
The AH-3DglgA and AH-3DglgC Mutants: Glucan and LPS The genome sequence of A. hydrophila ATCC7966 T [9] allow us to design primers to sequence the glgA and C region of A. hydrophila AH-3 (GenBank accession number JQ085284). The AH-3DglgA and AH-3DglgC mutants grown in a rich medium like LB were unable to produce glucan on the bacterial surface after the treatment with phenol-water and the chromatography on Sephadex G-50 of the soluble fraction, but were able to produce O34-antigen LPS ( Figure 2D show the result for AH-3DglgA).
The LPS profiles of both mutants, grown under the same conditions, analyzed on gels showed the presence of O34-antigen LPS with no significant differences with that of the wild type strain ( Figure 4A  The AH-3DgalU:glgA and AH-3DgalU:glgC Double Mutants From the AH-3 galU mutant (AH-2886) we obtained double mutants AH3DgalU:glgA and AH3DgalU:glgC as described in Materials and Methods. We were unable to detect the presence of glucan in the cell surface because they are galU mutants, but only a single LPS band (corresponding to the the one with faster migration in AH-3 galU mutant) could be detected on gels ( Figure 5, lane 2, data for AH3DgalU:glgA). LPS was extracted and purified from strain AH-3DgalU:glgA, and the oligosaccharide fraction was obtained by mild acid hydrolysis (see Materials and Methods), and this fraction analyzed by Electrospray mass spectrum. A major ion peak for a Hep 3 Kdo compound with the molecular mass 795.24 Da was obtained ( Figure 6A Similar results were obtained for AH3DgalU:glgC double mutant.

Enzyme Activities
The results for UDP-Glc or ADP-Glc pyrophosphorylase and glycogen synthase enzyme activities, either using crude extracts or purified proteins from A. hydrophila AH-3 (wild type) or mutant strains, are summarized on Table 1. Briefly, wild type crude extracts showed UDP-Glc and ADP-Glc pyrophosphorylase activities but a reduced UDP-Glc pyrophosphorylase activity was obtained on crude extracts of the GalU mutant in comparison with the corresponding from the wild type strain. However, the UDP-Glc pyrophosphorylase enzyme activity on GalU mutant crude extracts was not abolished. The AH-3DglgC crude extracts showed a reduced UDP-Glc pyrophosphorylase enzyme activity, less than the ones obtained from the GalU mutant crude extracts, versus the wild type crude extracts. The crude extracts from the AH-3DglgA mutant showed no glycogen synthase activity while high activity was detected for purified AH-3GlgA. Purified AH-3 GlgC showed UDP-Glc but not ADP-Glc pyrophosphorylase enzyme activity. Furthermore, purified AH-3 GlgA glycogen synthase activity was largely inhibited by the presence of unlabelled UDP-Glc but not by unlabelled ADP-Glc.

Complementation Studies Using AH-3DgalU:glgA Mutant
The enzyme activities results previously obtained prompted us to study the complementation of AH-3DgalU:glgA mutant with glgA from A. hydrophila AH-3 or E. coli through LPS studies. When plasmid vector carrying the AH-3 glgA (pBAD33-GlgA) was introduced into the AH-3DgalU:glgA mutant, two LPS-core bands without O34-antigen LPS were found ( Figure 5, lane 3). The LPS migration profile in gel of this complemented mutant, was identical to that of GalU mutant, and the new band with slow migration on gel showed a major ion peak corresponding to a HexNHexHep 6 Kdo compound with a molecular mass 1696.61 ( Figure 6B) in agreement with the LPS structure found in the single galU mutant [3] (see Figure 1B lane 2 upper band).
However, when the AH-3DgalU:glgA mutant was complemented with the same plasmid vector but carrying the E. coli DH5a glgA (pBAD33-GlgA Ec ) no changes in its LPS profile was observed ( Figure 5, lane 4). The only LPS-core band observed was the unique band for AH-3DgalU:glgA mutant according to its migration in the gel which correspond to the LPS chemical structure Hep 3 Kdo ( Figure 6A).

Adhesion to HEp-2 Cells and Biofilm Formation
No significant differences in adherence to HEp-2 cells were found between glucan producing or non-producing strains. Also, we compared the ability of the wild-type and mutant strains to  form biofilms in microtiter plates ( Table 2). The A. hydrophila wildtype strain, AH-3, exhibited a biofilm formation ability with an OD 570 value of 1.32 6 0.11. The mutant lacking only the O34antigen LPS tested.
(AH-3DrmlB) showed approximately a 55% reduction in their biofilm formation ability, while the mutants lacking both the O34antigen LPS and surface glucan (AH-405DwecP or AH-3DwaaL) showed a reduction of 70%. Finally, the mutants with the O34antigen LPS but unable to produce surface glucan (AH-3DglgA and AH-3DglgC) showed approximately a 25% reduction in their biofilm formation ability. The recovery of the O34-antigen LPS or surface glucan production in the mutants rescues the wild type strain value. This assay showed that surface glucan production has a role in biofilm formation, as well as O34-antigen LPS previously described by us as an adhesin [10].
AH-3DgalU:glgA double mutant (unable to produce O34antigen LPS and the complete external LPS core, as well as glucan) was practically unable to form biofilm. It shows a drastic reduction (.85%) in their ability to form biofilm in comparison with the wild type strain using the same technique.

Discussion
A. hydrophyla strain AH-3 GalU (UDP-Glc pyrophosphorylase) is responsible for synthesis of UDP-Glc from glucose-1-phosphate and UTP and galU mutants are unable to synthesize UDP-Glc by this reaction [3]. Chemical analysis of the LPS from these mutants showed the presence of glucose in a high percentage of the molecules isolated, which is not provided by GalU. This glucose residue is transferred by a b1,4 UDP-glucosyltransferase to the Lglycero-D-manno-heptoseII in the LPS inner-core. A second UDP-Glc pyrophosphorylase was found (GlgC), which together with the glycogen synthase GlgA is responsible for the biosynthesis of a branched a-glucan in strain AH-3. The UDP-Glc pyrophosphorylase GlgC was wrongly indicated as an ADP-Glc pyrophosphorylase in the complete Aeromonas genomes available [9,11]. Therefore, in strain AH-3 the UDP-Glc can be synthesized via both GalU and GlgC. This situation is similar to the one described in some bacterial species, were there is a second UTP-glucose-1phosphate uridyltransferase dedicated to the additional supply of UDP-Glc for specific purposes. Examples of this are the Streptococcus hasC supplying extra UDP-Glc for hyaluronic acid biosynthesis or the Sphingomonas paucimobilis ugpG performing the same role in gellan biosynthesis.
The A. hydrophila AH-3 a-glucan is a surface polysaccharide exported via the WecP which is also used by the O34-antigen LPS, and ligated to the surface through the O34-antigen polysaccharide ligase (WaaL). Nevertheless, it is an independent polysaccharide versus the O34-antigen LPS despite the common use of the export and ligation system, because we could find mutants devoid of either polysaccharide or both. The surface glucan is common to the mesophilic Aeromonas strains tested.
The combination of the enzyme activities altogether with the LPS structures of the AH-3DgalU:glgA mutant and their complementation with A. hydrophila or E. coli glgA, supported the following considerations: -A. hydrophila AH-3GlgA is a glycogen synthase able to produce glucan through the addition of UDP-Glc and their analogue in E. coli is unable to do it. While E. coli GlgA only reacts with ADP-Glc in the glycogen synthesis, A. hydrophila GlgA reacts both with UDP-Glc (glucan synthesis) and probably with ADP-Glc (glycogen synthesis). -A. hydrophila AH-3 GlgC is an UDP-Glc pyrophosphorylase and should be renamed as this in the genome of strain ATCC7966 T , because it is not the homologue for E. coli GlgC (ADP-Glc pyrophosphorylase). It seems that the E. coli GlgC homologues in Aeromonas strain ATCC7966 T are GlgC1 and GlgC2. -It is clear that Aeromonas is able to sense the drop of UDP-Glc generate by GalU mutation. When it happens, Aeromonas establish a preference for survival, abolish the production of surface glucan polysaccharide and produces a rather complete LPS-core by the incorporation of UDP-Glc molecules synthesized via GlgC (UDP-Glc pyrophosphorylase). To our knowledge it is the first report of a clear preference in choosing one or other surface saccharide molecule to produce on behalf of bacterial survival.
The results obtained indicated that surface glucan production may not have a significant role in cell adhesion but clearly has a role in biofilm formation. However, the O34-antigen LPS has a predominant role in both pathogenic characteristics: cell adhesion and biofilm formation. All of these surface polysaccharides characteristics also support the preference of the microorganism to produce LPS rather than surface glucan. Some E. coli exopolysaccharides (in particular CA and PNAG [18]) are integral components of biofilms, acting as the ''cement,'' which holds together the various protein, lipid, and polysaccharide components [19]. We suggested that a similar role may be played by Aeromonas surface a-glucan polysaccharide.
Several published reports indicate that the use of b-glucans enhances Aeromonas disease resistance in fish by potentiating innate immunity [20,21]. The b-glucans used are from yeast representing a heterogeneous group of glucose polymers, consisting of a backbone of b-(1R3)-linked b-D-glucopyranosyl units with b-(1R6)-linked side chains of varying length and distribution. However, in no case the authors were able to show the scientific reason for this Aeromonas resistance. The fact that Aeromonas produces a surface a-glucan may explain these results, and also suggests that the use of a-glucans instead of b-glucans could be more helpful to enhance the fish resistance to Aeromonas disease.

Bacterial Strains, Plasmids and Growth Conditions
Bacterial strains and plasmids used in this study are shown in Table 3. Aeromonas were grown either in tryptic soy broth (TSB) or tryptic soy agar (TSA) and E. coli in Luria-Bertani (LB) Miller broth and LB Miller agar. Kanamycin (50 mg/ml), chloranphenicol (25 mg/ml) or ampicillin (100 mg/ml) were added to the different media when needed. When required the strains were cultured in Davis minimal medium [22] with glucose or galactose as the unique carbon source.

DNA Techniques
DNA manipulations were carried out essentially according to standard procedures [23]. DNA restriction endonucleases and E. coli DNA polymerase Klenow fragment were obtained from Promega. T4 DNA ligase and alkaline phosphatase were obtained from Invitrogen and GE Healthcare, respectively. PCR was performed using BioTaq DNA polymerase (Ecogen) in a Gene Amplifier PCR System 2400 Perkin Elmer Thermal Cycler.

Nucleotide Sequencing and Computer Sequence Analysis
Double-stranded DNA sequencing was performed by using the dideoxy-chain termination method [24] with the Big Dye Terminator v3.1 cycle sequencing kit (Applied Biosystem). Oligonucleotides used for genomic DNA amplifications and DNA sequencing were purchased from Sigma-Aldrich. The DNA sequences were inspected in the GenBank and EMBL databases at the National Center for Biotechnology Information (NCBI) [25]. The Terminator search program in the GCG Wisconsin package was used to search for factor independent transcriptional terminators. ClustalW was used for multiplesequence alignments [26].

Construction of Defined Mutants
The chromosomal in-frame rmlB, glgA, and glgC deletion mutants, AH-3DrmlB, AH-3DglgA and AH-3glgC, respectively, were constructed by allelic exchange as described Milton et al. [27]. The primers used to obtain the mutants are listed in Table 4. Two asymmetric PCRs were carried out to obtain two DNA fragments (A-B and C-D) that were annealed at their overlapping region, and PCR amplified as a single DNA fragment using primers A and D. DNA fragments AB and CD of each gene were annealed at the overlapping regions provided by the primers B and C and amplified as a single fragment using primers A and D ( Table 2). The fusion products were purified, BglII digested (the BglII site is present in primers A and D), ligated into BglII-digested and phosphatase-treated pDM4 vector, electroporated into E. coli MC1061 (lpir), and plated on chloramphenicol plates at 30uC to obtain pDM4DrmlB, pDM4DglgA and pDM4DglgC plasmids. Plasmids with mutated genes were transferred into A. hydrophila AH-405 rifampicin-resistant (Rif r ) by triparental matings using the E. coli MC1061 (lpir) containing the insertion constructs and the mobilizing strain HB101/pRK2073. Transconjugants were selected on plates containing chloramphenicol and rifampicin. PCR analysis confirmed that the vector had integrated correctly into the chromosomal DNA. After sucrose treatment, transconjugants that were rifampicin resistant (Rif R ) and chloramphenicol sensitive (Cm S ) were chosen and confirmed by PCR.

Plasmid Constructions and Mutant Complementation Studies
For complementation studies, the A. hydrophila AH-3 genes rmlB, glgA and C, and E. coli glgA were PCR-amplified by using specific primer pairs and ligated to the plasmid pBAD33 (see the list of primers in Table 5). The plasmid constructions were transformed into E. coli LMG194 by electroporation, plated on chloramphenicol LB agar plates and incubated at 30uC. Plasmids with the amplified genes were independently transferred into the corresponding mutants by triparental mating using the mobilizing strain HB101/ pRK2073. Transconjugants were selected on plates containing chloramphenicol and rifampicin and confirmed by PCR. Each gene was expressed from the arabinose-inducible and glucose-repressible promoter (p BAD ) on pBAD33. Repression from the araC promoter was achieved by growth in medium containing 0.2% (w/v) Dglucose, and induction was obtained by adding L-arabinose to a final concentration of 0.2% (w/v). The cultures were grown for 18 h at 30uC in TSB medium supplemented with chloramphenicol and 0.2% glucose, diluted 1:100 in fresh medium (without glucose) and grown until they reached A 600 nm of about 0.2. Then L-arabinose was added, and the cultures were grown for another 2 h. Repressed controls were maintained in glucose-containing medium.

LPS Isolation and Electrophoresis
LPS was extracted from dry cells grown in LB. The phenol/ chloroform/light petroleum ether method [28] was used for strains producing rough LPS, while the phenol/water procedure [29] was used for the strains producing the O antigen domain (smooth LPS). For screening purposes LPS was obtained after proteinase K digestion of whole cells [30]. LPS samples were separated by SDS-PAGE or N-[2-hydroxy-1,1-bis(hydroxymethyl)ethyl]glycine (Tricine)-SDS-PAGE and visualized by silver staining as previously described [31].

Large-scale Isolation and Mild Acid Degradation of LPS
Dry bacterial cells of each mutant in 25 mM Tris?HCl buffer containing 2 mM CaCl 2 pH 7.63 (10 mL g -1 ) were treated at 37uC with RNAse, DNAse (24 h, 1 mg g -1 each), and then with Proteinase K (36 h, 1 mg g -1 ). The suspension was dialyzed, lyophilized, and the LPS extracted by the phenol-water procedure  [29]. A portion of the LPS (,50 mg) from each strain was heated with aqueous 2% HOAc (6 mL) at 100uC for 45 min. The precipitate was removed by centrifugation (13,000 g, 20 min) and the supernatant fractionated on a column (56 6 2.6 cm) of Sephadex G-50 Superfine in 0.05 M pyridinium acetate buffer pH 4.5 with monitoring using a differential refractometer (Knauer, Germany).

Methylation Analysis
A sample of each oligosaccharide (0.5 mg) was dissolved in 1 mL dimethyl sulfoxide. An excess of powdered NaOH was added, the reaction glass flushed with dry N 2 , and sealed. After stirring at 20uC for 1 h, 0.5 mL of cold CH 3 I was added and the mixture stirred at 20uC for 1 h. Then water was added, the methylated product extracted with CHCl 3 , the extract washed with water, and evaporated with a stream of dry nitrogen. The methylated oligosaccharide was hydrolysed with 2 M CF 3 CO 2 H.
(120uC, 2 h) and acid was removed with a stream of nitrogen. The methylated monosaccharides were conventionally reduced with NaBH 4 , acetylated with Ac 2 O in pyridine, and analysed by GLC on a Hewlett-Packard 5880 chromatograph and GLC-MS on a Hewlett-Packard HP 5989A instrument using a HP-5ms capillary column and a temperature gradient of 150uC (3 min) to 290uC at 7uC min -1 .

Crude Extracts Production and Enzymatic Activity Measurements
Suspensions of bacteria (25% weight per volume), washed in 25 mM Tris-HCl buffer (pH 7.5) containing 1 mM MgCl 2 , and crude extracts obtained by passing the washed cells through a French pressure cell (1,120 kg/cm2) twice, and cellular debris removed by centrifugation (32,000 6 g for 15 min at 4uC). Permeabilized cells were prepared by adding 25 ml of a tolueneethanol mixture (1:9 [vol/vol]) to 1 ml of cell suspension (approximately 3 mg of protein) as described previously [32]. Permeabilized cells were then pelleted by centrifugation (15,000 6 g for 8 min at 4uC) and resuspended in 50 mM of Tris-HCl (pH 7.2). Protein concentrations of extracts were determined by using the Bio-Rad Bradford assay as directed by the manufacturer with bovine serum albumin as the standard.
The reaction was started by addition of 2 mM (final concentration) of ADP-glucose or UDP-glucose.
Glycogen synthase activity was determined by the incorporation of glucosyl units from UDP-[ 3 H] glucose into glycogen [33]. The reaction mixture (600 ml) at 37uC included 50 mM Tris-HCl (pH 7.2), 3 mM MgCl 2 , 6 mM glucose-6-phosphate, 3.3 mM UDP-glucose, 10 ml of UDP-[ 3 H]glucose (0.067 mCi/ml; 15.3 Ci/mmol), and permeabilized cells (approximately 1 mg of protein) or purified AH-3 GlgA (50 mg ). Aliquots (100 ml) were withdrawn at different times and immediately added to tubes containing 300 ml of 67.5% KOH to stop the reaction. Glycogen was isolated from this mixture by the ethanol precipitation. Dried glycogen was dissolved in 150 ml of H 2 O, and radioactivity was determined by liquid scintillation.

Adherence Assay to HEp-2 Cell
The adherence assay was previously described [34]. Twenty HEp-2 cells/coverslips were randomly chosen, and the number of bacteria adhering/HEp-2 cell was recorded. Assays were carried out in triplicates.

Biofilm Formation
Quantitative biofilm formation was performed in a microtiter plate as described previously [35], with minor modifications. Briefly, bacteria were grown on TSA and several colonies were gently resuspended in TSB (with or without the appropriated antibiotic); 100 ml aliquots were place in a microtiter plate (polystyrene) and incubated 48 h at 30uC without shaking. After the bacterial cultures were poured out, the plate was washed extensively with water, fixed with 2,5% glutaraldehyde, washed once with water and stained with 0,4% crystal violet solution. After solubilization of the crystal violet with ethanol-acetone (80/ 20, v/v) the absorbance was determined at 570 nm.

Statistical Analysis
The data obtained in several assays were analysed by the t-test using Microsoft Excel software.