A New Basal Sauropodomorph Dinosaur from the Lower Jurassic Navajo Sandstone of Southern Utah

Background Basal sauropodomorphs, or ‘prosauropods,’ are a globally widespread paraphyletic assemblage of terrestrial herbivorous dinosaurs from the Late Triassic and Early Jurassic. In contrast to several other landmasses, the North American record of sauropodomorphs during this time interval remains sparse, limited to Early Jurassic occurrences of a single well-known taxon from eastern North America and several fragmentary specimens from western North America. Methodology/Principal Findings On the basis of a partial skeleton, we describe here a new basal sauropodomorph dinosaur from the Lower Jurassic Navajo Sandstone of southern Utah, Seitaad ruessi gen. et sp. nov. The partially articulated skeleton of Seitaad was likely buried post-mortem in the base of a collapsed dune foreset. The new taxon is characterized by a plate-like medial process of the scapula, a prominent proximal expansion of the deltopectoral crest of the humerus, a strongly inclined distal articular surface of the radius, and a proximally and laterally hypertrophied proximal metacarpal I. Conclusions/Significance Phylogenetic analysis recovers Seitaad as a derived basal sauropodomorph closely related to plateosaurid or massospondylid ‘prosauropods’ and its presence in western North America is not unexpected for a member of this highly cosmopolitan clade. This occurrence represents one of the most complete vertebrate body fossil specimens yet recovered from the Navajo Sandstone and one of the few basal sauropodomorph taxa currently known from North America.


Introduction
The Early Jurassic (201.5-176 Ma) was an interval of major global climatic and biotic transition that included the diversification of many vertebrate groups. Among these were the sauropodomorphs, a diverse group of herbivorous dinosaurs that would remain among the dominant herbivores in many terrestrial ecosystems through the close of the Mesozoic, a period of more than 140 million years. The basal members of Sauropodomorpha, often referred to as the 'prosauropods,' achieved a nearly global distribution by the Early Jurassic, with taxa known from Africa [1,2,3,4,5,6,7,8,9], Antarctica [10], Asia [5,11,12,13,14,15], India [5]; North America [16,17,18], and South America [19,20].
Basal sauropodomorph remains are scarce in North America. Whereas basal sauropodomorph taxa are well known and globally widespread through the Late Triassic, their remains are conspicuously absent from North American Triassic terrestrial assemblages [21,22,23]. The Early Jurassic record of eastern North America includes several specimens of the well known taxon Anchisaurus (Ammosaurus) from the Lower Jurassic Portland Formation of the Newark Supergroup in the eastern United States [17,24,25] and undescribed remains from the Lower Jurassic McCoy Brook Formation in Nova Scotia [18,26]. By comparison, the Early Jurassic sauropodomorph record of western North America is sparse and fragmentary despite an abundance of exposed terrestrial sedimentary units from this time period. Western North American basal sauropodomorph remains are known from the Lower Jurassic Glen Canyon Group of the Colorado Plateau, including a skull from the base of the Kayenta Formation of Arizona [2,6,16,27] and fragmentary articulated remains from the top of the Navajo Sandstone of Arizona [17,24,28,29,30,31]. The recent discovery [32] of a partially articulated specimen from the Navajo Sandstone of southern Utah represents the most complete basal sauropodomorph yet recovered from western North America and one of the few diagnosable specimens from continental North America.

Field Methods and Preparation
The holotype specimen described here was originally discovered and reported to the UMNH by local artist Joe Pachek. The specimen was extracted from the base of a near-vertical cliff wall using a diamond blade on a gas-powered industrial cut-off saw. Trenching around the specimen block required repeated 10 cm deep cuts in a 10 cm grid around the specimen, with removal of blocks of matrix with hammer and chisel. During excavation, the main block naturally split in two along the medial surface of the ventral abdominal wall. The blocks were prepared using pneumatic air scribes and needles under magnification. Due to the delicate preservation of the fossil bone and the articulated nature of the specimen, only the tibia and pelvis were completely removed from the major blocks.

Imaging
Computed tomography (CT) of the pelvis was undertaken to reconstruct overall morphology using a Siemens Sensation 64 scanner at 120 Kv (3 mm slice interval) at the University of Utah Medical Center.

Systematic Paleontology
Systematic hierarchy.
Holotype. UMNH VP 18040; articulated partial postcranial skeleton including portions of 11 dorsal vertebrae, 16 dorsal ribs, both pectoral girdles, a nearly complete left and partial right forelimb, partial pelvis, partial left hind limb, and partially articulated array of gastral ribs.
Type locality. Comb Ridge, San Juan County, Utah (Fig. 1). The specimen was recovered from UMNH VP Locality 191 at ground level in a slot canyon below remains of the ''Eagle's Nest'' cliff dwelling.
Horizon and Age. UMNH VP 18040 was preserved in a bed of massive sandstone at the base of the Navajo Sandstone, one meter above an interbedded mudstone and sandstone facies of the Kayenta Formation. The Navajo Sandstone is the uppermost unit of the Glen Canyon Group with an age no earlier than Pleinsbachian [31]. The Glen Canyon Group was deposited in a large retroarc basin, with the crossbedded eolian Navajo Sandstone in a complex gradational contact with the underlying fluvially-dominated Kayenta Formation [40,41,42].
Diagnosis. Seitaad ruessi is a non-eusauropod sauropodomorph dinosaur distinguished from other basal saurpodomorphs by the following combination of characters (autapomorphies marked by *): mid-dorsal neural arches subequal to or taller than respective centra; presence of distinct plate-like medial process of the scapula contributing posteriorly to glenoid surface*; prominent deltopectoral crest offset proximally from head of humerus by distinct proximally directed hook*; proximally convex and laterally expanded proximal surface of metacarpal I*; pubis with transversely narrow and elongate apron and relatively small obturator foramen; and enlarged pedal ungual present on digit II.
Seitaad ruessi can be further distinguished from the basal sauropodomorphs Panphagia and Saturnalia on the basis of its elongate and narrow scapular blade and from Asylosaurus and Efraasia on the basis of its enlarged distal carpal I overlapping distal carpal II, its wide metacarpal I inset into the carpus, and its strongly twisted first phalanx of digit I. Seitaad can be distinguished from the plateosaurian taxa Plateosaurus, Massospondylus, Riojasaurus, and Yunnanosaurus on the basis of its transversely narrow pubic apron and enlarged ungual of pedal digit II; Jingshanosaurus by the absence of a fused carpal block uniting distal carpals II-V; Lessemsaurus by its narrow strap-like scapular blade; and Adeopapposaurus by its transversely wide metacarpal I. Seitaad can be distinguished from the eastern North American sauropodomorph taxon Ammosaurus on the basis of its robust metacarpal I, enlarged distal carpal I, relatively short and tall dorsal centra, and large calcaneum.

Description and comparisons
The skeleton of Seitaad ruessi (UMNH VP 18040) preserves articulated portions of the axial and appendicular skeleton (Figs. 1C,2,3). Many elements are moderately deformed from post-depositional plastic shear along a roughly posterodorsally/ anteroventrally plane.
Axial skeleton. The axial skeleton includes portions of eleven articulated dorsal vertebrae (D) and several dorsal ribs preserved in articulation or close association with the vertebrae (Figs. 2,3). Posteriorly, the axial column is laterally flexed to the right. Anteriorly, the column is depressed such that the anterior dorsal vertebrae nearly contact the medial surface of the pectoral girdle. The neural spines and portions of the neural arches of all preserved vertebrae and the proximal portions of most dorsal ribs have been lost to erosion.
The vertebrae are interpreted to represent D3 through D13 based on the number and position of preserved ribs and on the proximity of the ventral pelvis. Only morphologically indistinct portions of D3 are preserved on the dorsal surface of the block. Posteriorly, the dorsal surfaces of D4 and D5 are exposed in articulation, though the neural spines and portions of the neural arch have been lost to erosion. The left lateral (Fig. 4) and dorsal surfaces of D6 through D10 are exposed and permit accurate characterization of overall morphology. D11 and D12 are represented only by the ventral portions of the centra, and D13 is represented only by the anteroventral margin of the centrum (Fig. 2).
The dorsal vertebrae are similar in overall morphology to other basal sauropodomorphs. The centra are amphicoelous and relatively short, with a length/height ratio of approximately 3/2, similar to Adeopapposaurus [20] and Massospondylus [43]. This condition differs from the relatively anterioposteriorly short and dorsoventrally tall dorsal centra of Riojasaurus [44] and Lufengosaurus [45], and from the relatively elongate and short centra of Anchisaurus (Ammosaurus) [17,24]. The anterior and posterior margins of the dorsal centra are strongly flared, resulting in a constricted appearance in lateral view. A broad, shallow fossa is present ventral to the neural arch on the lateral surfaces of the exposed centra.
The neural arches of D8-D10 are dorsoventrally subequal to slightly taller than their respective centra, similar to the conformation in Adeopapposaurus and Unaysaurus [46], but differing from most other basal sauropodomorphs. Parapophyses are exposed laterally on D8-D10 on the anterior border of the neural arch immediately dorsal to the centrum. The parapophyses are elliptical in outline and dorsoventrally taller than long, with their long axis inclined dorsally and posteriorly. As in other basal sauropodomorphs, a thin laminar paradiapophyseal lamina extends from the parapophysis along the ventral surface of the transverse process. Dorsally, the paradiapophyseal lamina defines  A total of 13 [10 and over use number] dorsal ribs are preserved in articulation or close association with the dorsal vertebrae. The first eight dorsal ribs are preserved on the right side, with ribs articulated with D3 through D7. One rib, likely representing the eighth, is disarticulated and rotated laterally on the right side of the skeleton (Fig. 2). The first five dorsal ribs are preserved on the left side of the skeleton, with ribs three through five articulated with their corresponding vertebrae. In overall morphology, the dorsal ribs are elongate and weakly curved, with an elliptical crosssection. The distal ends of the ribs are not exposed.
Appendicular skeleton. The appendicular skeleton includes: nearly the entire left and right pectoral girdles lacking only the anterior margins of the scapulae, coracoids, and the clavicles; portions of both articulated forelimbs, including a nearly complete left forelimb; the ventral pelvis, including both nearly complete pubes; and portions of the left hind limb, including the nearly complete pes.
Both scapulae are well preserved and in articulation with the skeleton (Figs. 2,3,5). The scapula is elongate, mediolaterally flattened, and gently arched laterally, as in other basal sauropodomorphs. The blade is proportionally long and narrow, similar to that of Adeopapposaurus, Plateosaurus [47], and Massospondylus, and differing from the wide scapular blades of Panphagia [48], Lessemsaurus [49,50] and Melanorosaurus [51]. Dorsally, the blade is weakly expanded anteroposteriorly, producing a gently concave anterior and posterior margin in lateral view. The posterior termination of this expansion forms a sharp corner with the dorsal margin, as in Plateosaurus and Massospondylus and unlike the more rounded corner of Adeopapposaurus. A circular hole, interpreted as pathologic, is present on the dorsal portion of the blade of the left scapula of UMNH VP 18040. Ventrally, the blade expands into the basal portion and its contact with the coracoid (Fig. 5). The anterior margins of the basal portion have been damaged and lost to erosion obscuring the morphology of this region. Anteriorly, the posterior margin of the acromion rises at an angle of less than 65 degrees relative to the long axis of the blade. The basal portion is laterally convex, increasing in thickness mediolaterally toward the coracoid contact. Medially and immediately dorsal to the coracoid contact, a broad semicircular plate of bone projects roughly parallel with the surface of the coracoid (Fig. 6). A similar thickening of this region of the scapula is figured for Saturnalia [52], but differs from the plate-like expansion in Seitaad. This medial scapular process sweeps posteriorly to contribute, along with the main basal portion of the scapula and the coracoid, to a tri-radiate glenoid surface.
Only the medial surfaces of the strongly overlapping coracoids are visible (Fig. 5). Like the scapula, the anterior margin of the coracoid has been lost to erosion. The medial surface is smooth and concave. As in other sauropodomorphs, the medial margin is strongly convex, curving posteriorly to a sharp posteriorly directed corner. From the posterior corner, the margin turns anteriorly to meet the glenoid surface.
The medial surfaces of both sternal plates are visible, preserved in articulation with the pectoral girdle (Fig. 5). The sternal plates are anteroposteriorly elongate and thin, articulating anteriorly with the posterior corner of the coracoid. Although the sternal plates of other sauropodomorph taxa have been described as elliptical in dorsal or ventral view (e.g., Adeopapposaurus, Massospondylus, and Yunnanosaurus [13]), the sternal plates of Seitaad have three distinct margins, as in Lufengosaurus [45]. The medial margin is smoothly arched, beginning at its anterior contact with the   coracoid and extending posteriorly to a sharp intersection with the lateral margin. The lateral margin can be separated into two distinct sections, a straight irregularly scalloped section and a smooth anterolaterally directed section. A distinct ridge extends posteromedially over the dorsal surface of the sternal plate, originating at the contact between the two portions of the lateral margin, and separating the medial surface into two distinct planes.
The humerus of Seitaad is similar in overall morphology to those of other basal sauropodomorphs. Left and right humeri are preserved in articulation with the pectoral girdle and are exposed along their posterior and lateral surfaces (Figs. 2,3,5,7). The proximal humerus is expanded mediolaterally, with an ellipsoidal proximal head. Medially, the proximal surface is deflected sharply forming a proximomedially directed medial tuberosity. Distal to the medial tuberosity, the humerus is strongly medially concave in posterior view. The deltopectoral crest is prominent, extending anteriorly from the anterolateral edge of the humerus, and extending approximately 50% of the length of the humerus. The anterior edge of the deltopectoral crest is rugose, with a straight proximodistally directed margin. Proximally, the deltopectoral crest is sharply offset from the shaft of the humerus forming a proximally directed spine (Fig. 7A,B). Laterally, a prominent longitudinal ridge extends along the base of the deltopectoral crest to form the lateral margin of the humerus, is similar to the condition in Unaysaurus and, to a lesser extent, in Massospondylus, Asylosaurus [53], and Riojasaurus. Distal to the deltopectoral crest, the humeral shaft is constricted and elliptical in cross-section. The distal humerus expands mediolaterally from this constriction, with a large, robust radial condyle.
The radius is a morphologically simple element, with a length 0.67 times that of the humerus. The proximal end is expanded relative to the shaft, with a simple planar articular surface. The shaft is elliptical cross-section, twisting distally approximately 80 degrees relative to the proximal expansion. The distal articular surface is weakly convex and strongly inclined at an angle of approximately 45 degrees relative to the long axis of the shaft. This morphology differs from other basal sauropodomorphs (e.g., Adeopapposaurus, Massospondylus, Plateosaurus, Saturnalia, Unaysaurus), in which the distal end is offset from the long axis at an angle greater than 70 degrees. However, this may be accentuated by plastic deformation of the distal end in UMNH VP 18040 that is similar to the distortion of this region observed in Efraasia [54].
Portions of both ulnae, including the complete left ulna, are preserved (Fig. 7). In general morphology, the ulna is similar to that of other basal sauropodomorphs, with a length 0.69 times the length of the humerus. The proximal end is triangular in outline, with a shallow depression on the anterolateral surface of the proximal shaft for articulation with the proximal radius. This     depression is bounded laterally by a short, rounded lateral crest. Posteriorly, the proximal end expands to form a short, rounded olecranon similar in morphology to those of other basal sauropodomorphs except Saturnalia in which it is very large. The shaft is elliptical in section, twisting toward the distally expanded distal articular surface. The distal articular surface is smoothly convex.
The carpus preserves three ossified distal carpals and a small ossified intermedium (Fig. 7). Distal carpal I is robust, with a mediolateral width greater than the mediolateral width of the proximal surface of metacarpal I, similar to other basal sauropodomorphs but in contrast to the relatively smaller distal carpal I of Adeopapposaurus. The proximal surface is weakly convex and irregular, with a marked proximodistal thickening laterally toward its articulation with the distal ulna. Distally, distal carpal I articulates with metacarpal I and distal carpal II over a weakly convex surface. Distal carpal II is much smaller, only 0.40 times the mediolateral width of distal carpal I. Within the carpus, distal carpal II is closely articulated with the proximolateral expansion of metacarpal I medially, distal carpal I proximally, and the proximal surface of metacarpal II distally. A small, ossified, irregularly shaped intermedium is exposed lateral to distal carpal II, situated proximal to the medial half of the articular surface of metacarpal III. Laterally, the large distal carpal III is centered proximal to metacarpal IV. The proximal surface of distal carpal III is concave for articulation with the distal ulna and the distal surface is flat to weakly convex for articulation with metatarsals III, IV, and V.
The complete articulated left metacarpus and metacarpals I-III of the right metacarpus are preserved (Fig. 7). Metacarpal I is short and robust, with a proximodistal length 0.77 times the length of metacarpal II and a midshaft width nearly twice that of metacarpal II (1.18 proximal width/length ratio). Proximally, metacarpal I is inset into the carpus, with a prominent proximolateral process articulating laterally with distal carpal II and the proximal surface of metacarpal II. Though an inset metacarpal I is present in many basal sauropodomorphs (e.g., Adeopapposaurus, Massospondylus, Plateosaurus), the proximolateral process of Seitaad is expanded proximally and laterally beyond the lateral extent of the lateral distal condyle and possesses a  distinctly convex proximal surface for articulation with distal carpal I. Distally, metacarpal I is asymmetric, with a distally expanded lateral condyle similar to that of many basal sauropodomorphs. Metacarpal II is the longest of the metacarpals, with moderate expansions of the proximal and distal articular surfaces. Metacarpals III, IV, and V decrease in size sequentially retaining the same overall proportions, with metacarpal V 0.76 times the length of metacarpal IV. Proximally, all five metacarpals articulate tightly along their medial and lateral surfaces. Distally, the metacarpals diverge, with metacarpal V set nearly perpendicular to metacarpal II as preserved (Fig. 7).
The complete manual phalangeal formula of Seitaad is unknown, with the distal portions of digits II and III missing (2-?-?-3-2). The first phalanx of digit I is greatly enlarged and asymmetric; the transverse axis of the distal articular surface twisted laterally approximately 60 degrees relative to the mediolateral axis of the proximal end. This morphology differs from the significantly less twisted first phalanges of Efraasia and Asylosaurus but is generally similar to the morphology present in Massospondylus, Unaysaurus, Plateosaurus, Yunnanosaurus, and Anchisaurus. The second phalanx of digit I consists of a robust, laterally compressed and strongly curved ungual oriented medially within the manus by the combined asymmetry of metacarpal I and of the first phalanx. A deep longitudinal ridge runs along the medial surface of the ungual distally from the proximal articular facet. Proximally, a well developed flexor tubercle is present on the ventral edge. Portions of the first two phalanges are preserved in digits II and III. The widths of the proximal ends are subequal in size relative to the mediolaterally expanded distal ends. Deep collateral pits are present on the lateral surfaces of the distal condyles. A small medial fragment of the third phalanx of digit III is also present, though more distal phalanges and unguals have been lost in digits II and III. Digit IV preserves three complete phalanges. The first two are similar in overall morphology to the proximal phalanges of digits II and III, though with shallow collateral pits and deeply divided distal condyles. The distalmost ossified phalanx is small and subquadrangular in dorsal outline. Digit V preserves two complete phalanges. The first phalanx is elongate, 0.90 times the length of metacarpal V, and strongly constricted between the proximal and distal surfaces. The distal phalanx is elongate and paddle-shaped, with a flat proximal articulation and a rounded dorsoventrally compressed body. Morphologically, the distal phalanx is much longer than the proximodistally short distal phalanges of other basal sauropodomorphs including Efraasia, Massospondylus, and Plateosaurus.
Much of the dorsal pelvic girdle, including the entire ilium and most of the ischium, has been lost to erosion so that only the pubes are well preserved (Fig. 8). The distal pubic blade is elongate and anteroposteriorly compressed, contacting the contralateral blade along its entire length to form a pubic apron (Fig. 8B). Laterally, each distal blade is thickened, thinning to a lamina toward its medial contact and thus forming a teardrop-shaped transverse section. The pubic apron of Seitaad narrows distally, differing from the transversely broad pubic aprons of many basal sauropodomorphs (e.g., Panphagia, Saturnalia, Efraasia, Massospondylus, Melanorosaurus, Plateosaurus, Riojasaurus) yet similar to the narrow aprons of Adeopapposaurus [20] and Anchisaurus (Ammosaurus) [17,24]. The distal end of the blade is expanded anteroposteriorly to form a small rugose 'boot.' Proximally, the pubis is thickened toward its contact with the ilium, with a subtriangular cross section. Medially, the proximal end twists to form a dorsoventrally compressed ventral lamina that contacts its antimere medially and the ischium posteriorly. A small elliptical laterally directed obturator foramen (Fig. 8C,D) is present on the lateral surface of the pubis, similar in proportion to the obturator of Adeopapposaurus [20]. Only the ventral laminae of the ischia are preserved Both laminae meet at the midline and contact the ventral laminae of the pubes along an anteriorly convex suture.
The complete left tibia is moderately distorted by plastic deformation directed along a proximal/anterior to distal/posterior axis. Generally, the tibia is morphologically similar to the tibiae of other basal sauropodomorphs (Fig. 9). A well developed cnemial crest continuous with the medial surface is present, divided by a shallow fossa from the external prominence laterally. The shaft is straight and elliptical in section, compressed anteroposteriorly. The distal end is expanded mediolaterally, with a well developed anterolateral process and more distally expanded posterolateral process.
The astragalus is subtrapezoidal in dorsal view, with a rounded medial margin expanding laterally to a straight lateral contact with the calcaneum (Fig. 10B), with a similar morphology to Plateosaurus, Massospondylus, and Adeopapposaurus but differing from the mediolaterally short astragalus of Panphagia and Saturnalia and the anteroposteriorly narrow astragalus of Efraasia. The proximal surface consists of an open elliptical fossa with a laterally sloping floor. A subtriangular ascending process originating along the anterolateral margin forms the anterior wall of the proximal fossa; anteromedially, the proximal fossa is open along an anteriorly sloping surface. The lateral surface of the astragalus is weakly concave for contact with the distal fibula.
The calcaneum consists of a proximodistally flattened subtriangular plate approximately 0.56 times the mediolateral width of the astragalus. The proximal surface is weakly concave for contact with the distal fibula. Distally, the calcaneum articulates with distal tarsal IV.
Two distal tarsals are preserved in the articulated tarsus (Fig. 10). Distal tarsal III is centered over the medial surface of metatarsal III and distal tarsal IV is proximal to the lateral edge of metatarsal III and most of the proximal surface of metatarsal IV. Both distal tarsals articulate proximally with the astragalus and calcaneum.
The first four metatarsals are preserved in articulation (Fig 10A,B). The proximal surfaces are distorted and obscured proximally by the astragalus and distal tarsals. Metatarsal I is the shortest, 0.62 times the length of metatarsal II. Metatarsal II is slightly shorter than the subequal third and fourth metarsals, approximately 0.94 times the length of metatarsal III. Proximally, the metatarsals are mediolaterally expanded, with a laterally imbricating pattern of articulation. The shafts are robust and moderately compressed anteroposteriorly, with elliptical sections. Distally the metatarsals expand to a form a mediolaterally broad distal ginglymus with deep collateral pits on both medial and lateral surfaces. The distal ginglymus of both metatarsals I and II is directed medially at an angle of 10 to 15 degrees relative to the proximal ends. Metatarsal V is either not preserved or not exposed.
The pedal phalanges of the first four digits of the left pes are completely preserved in articulation with a phalangeal formula of 2-3-4-5-? (Fig. 10). The first phalanx of digit I is asymmetric, the transverse axis of its distal end twisted relative to its proximal end. The other pedal phalanges of digits II, III, and IV are similar in morphology, with proximally expanded proximal articular surfaces, and expanded distal condyles with shallow collateral pits. Unlike other basal sauropodomorphs, in which the ungual of digit I is the largest (e.g., Adeopapposaurus, Massospondylus, Lufengosaurus), the ungual of digit II is 1.4 times the length of ungual I. The unguals are moderately laterally compressed and triangular, with longitudinal grooves running along the medial and lateral margins.
Dermal ossifications. An intact, though distorted gastral array is visible on the medial surface of the ventral abdominal wall (Fig. 5). Distinction between lateral and medial elements is not evident, though an imbricated pattern of overlap between medial elements [55] is evident. The gastralia are elongate and gently curved, with an elliptical, dorsoventrally compressed cross section. Anteriorly, the gastralia are in close association with the sternal plates.

Preservation
Many vertebrate body fossils from the Navajo Sandstone consist of articulated to partially articulated skeletons deposited in interdune or dune facies [31]. The holotype skeleton of Seitaad (UMNH VP 18040) represents one of the most complete vertebrate fossils yet recovered from the Navajo Sandstone and its unique preservation warrants brief discussion here. As exposed on the surface of the canyon wall upon discovery, the remains of Seitaad include the cross sections of eroded bone from dorsal vertebrae 3 through 13, as well as the proximal pubes and ventral ischia (Fig. 11). The right forelimb was exposed as an impression along with an accompanying thin film of cortical bone from the scapula through metacarpals I-III. Some distal phalanges of the left manus were destroyed during excavation. The only preserved element that is not in near articulation is the left tibia, which is rotated 90 degrees on its long axis and displaced by 10 cm from articulation with the astragalus. There is no sign of a left fibula or digit V. Anterior and posterior portions of the skeletonincluding the skull, cervical series, caudal region, dorsal pelvis, and femur-are presumed to have been eroded away prior to discovery.
UMNH VP 18040 is preserved in a one meter thick massive sand bed at the base of a 200 m cliff of Navajo Sandstone. The homogenous sand bed represents the first long term onset of Navajo Sandstone in the area. This contact between the Kayenta Formation and Navajo Sandstone illustrates the local switch from a fluvial environment, periodically inundated with tongues of sand erg deposits, to a permanent onset of long term dune activity [56,57]. Locally, the lower Navajo Sandstone is characterized by cross-bedded sandstone interpreted as eolian dune sets. Slumped and massive sandstone beds, sedimentary packages that are locally common in the lower 10 meters of the Navajo Sandstone, are associated with these dune sets and likely indicate dune slumps or collapsed dune faces. These deposits have been identified in other parts of the unit regionally [56]. The sedimentary package preserving UMNH VP 18040 is petrologically identical to laterally equivalent sandstones, but lacks both small and large scale indicators of eolian deposition including foreset cross-bedding. The sand bed that preserves UMNH VP 18040 is laterally equivalent to eolian dune sets and is interpreted as a local dune collapse deposit.
Taphonomic preservation of the specimen, with articulation of every preserved bone in place, suggests that the specimen was held together by soft tissues at the time of burial. The orientation of the specimen (40 degrees from horizontal on the mediolateral plane and 85 degrees on the sagittal plane, in a head down position), together with the high degree of articulation, is further suggestive of dune collapse preservation. The partial disassociation of the left tibia and the absence of the fibula and pedal digit V suggest that the animal was dead prior to burial.

Navajo Sandstone sauropodomorphs
Other fragmentary sauropodomorph remains from the Navajo Sandstone have been referred to Anchisaurus (Ammosaurus) [17,30], though these referrals have recently come into question [24]. The first sauropodomorph remains reported from this unit [28,29], MNA G2 7233 (now cataloged as MNA V743 through MNA V752), consist of portions of several articulated caudal vertebrae, poorly preserved pubes, a partial right tibia, both articulated pedes, and several articulated gastralia. This specimen is clearly not referable to Seitaad because it possesses a broad pubic apron and likely represents an indeterminate taxon given its fragmentary preservation [24]. Another partial sauropodomorph from the Navajo Sandstone, UCMP 82961, consists of two cervical vertebrae and cervical ribs, an articulated left manus, fragments of the right manus, several pedal phalanges, and fragments of the pectoral girdle [31]. Previous authors have mistakenly identified a pedal phalanx and ungual as part of digit I of the manus [i.e., 17,30,31]. Though incomplete, the manus of UCMP 82961 does compare favorably with Seitaad, including a proximally expanded lateral process of metacarpal I and an enlarged distal carpal I overlapping distal carpal II. Unfortunately, the specimen is too incomplete to make a confident diagnosis or referral. However, it does preserve enough features to indicate it belongs to the clade Plateosauria sensu Yates [24], which includes Plateosaurus and all more derived sauropodomorphs.

Phylogenetic position
Seitaad is considered a distinct taxon based on several morphologic features of the pectoral girdle and forelimb not present in other basal sauropodomorphs. The distinct, plate-like medial process of the scapula contributing posteriorly to the glenoid surface is autapomorphic. A medial thickening of the scapular glenoid region is figured for Saturnalia [52], but does not approach the morphology of the semicircular plate present bilaterally in Seitaad. Additionally, the prominent offset proximal hook of the deltopectoral crest is autapomorphic for Seitaad. In many basal sauropodomorph taxa, the proximal margin of the deltopectoral crest is offset sharply from the proximal articular surface; however, all other taxa lack the accompanying proximal expansion present in Seitaad. Finally, the proximally convex and laterally expanded proximal surface of metacarpal I represents a feature that is absent in other basal sauropodomorph taxa. In other basal sauropodomorphs, the proximal end of metacarpal I is laterally inset into the carpus. However, in these taxa, the lateral margin of the proximal surface does not extend beyond the lateral boundary of the lateral distal condyle or project proximally to the degree present in Seitaad.
Relationships among basal sauropodomorphs, or 'prosauropods' have been historically unstable and controversial with some phylogenetic analyses supporting paraphyly of the group with respect to Sauropoda [e.g., 38,46,49,50,58,59,60,61,62,63,64] and other analyses supporting monophyly of all or a reduced subset of 'prosauropods' [e.g., 5,24,65,66,67,68,69,70,71]. However, recent iterations of both datasets have largely converged in their results, agreeing that 'prosauropods' likely represent a paraphyletic assemblage of single lineages and small sub-clades along the stem of Sauropoda [72] though a consensus topology has not yet been achieved. A detailed revision of basal sauropodomorph phylogeny is beyond the scope of this study. In order to assess the phylogenetic position of Seitaad, preliminary phylogenetic analyses were performed using two of the most exhaustive datasets published to date representing each of the proposed prosauropod topologies [64,71], as modified by a recent analysis [72]. Both analyses were performed using TNT v. 1.1 [73] with a heuristic search of 1000 replicates of Wagner trees (using random addition sequences) followed by Tree Bisection and Reconnection (TBR) branch swapping (holding 10 trees per replicate).
The phylogenetic analysis of Yates [64] represents one of the most exhaustive published to date in support of prosauropod paraphyly with respect to Sauropoda. In addition to the modifications of Yates et al. [72], additional characters and scorings described by Smith and Pol [10] and the South American saupodomorph Adeopapposaurus [20] were included in the analysis (Dataset S1). The analysis resulted in the recovery of 16 MPTs, each with a length of 1173 steps, with a consistency index of 0.358 and a retention index of 0.689. The strict consensus of the 16 MPTs is presented in Fig. 12A. Seitaad is recovered as sister to Adeopapposaurus from the Lower Jurassic Cañón del Colorado Formation of Argentina. This relationship is supported by four unambiguous synapomorphies: height of neural arches subequal to or greater than the centrum height (Character 164: 0R1); minimum scapula width less than 20 percent its length (Character 200: 1R0); length of deltopectoral crest extends between 30 and 50 percent the length of the humerus (Character 207: 2R1); width of conjoined pubes less than 75 percent their length (Character 259: 1R0). The primary difference between this analyses and previous iterations of the dataset [64,72] is the separation of Massospondylidae (sensu [64]) into two separate stem based clades: (Coloradisaurus + Lufengosaurus + Glacialisaurus) and (Massospondylus + Adeopapposaurus + Seitaad).
The analysis of Upchurch et al. [71] represents one of the most comprehensive and complete datasets with results in support of prosauropod monophyly, though the recent modifications to this analysis by Yates et al. [72] recovered a paraphyletic topology with respect to Sauropoda. The analysis was expanded with the addition of the taxa and character modifications of Yates et al. [72] and the inclusion of Seitaad and the basal sauropodomorph Adeopapposaurus [20] (Dataset S2). The analysis followed the procedures outlined by Upchurch et al. [71] including the treatment of all characters as binary (except character 144 which was treated as an ordered multistate character) and constraining the topology of the non-sauropodmorph outgroup taxa to conform to that of Langer [74]. The phylogenetic analysis resulted in the recovery of 54 most parsimonious trees (MPTs) of 768 steps, with a consistency index of 0.387 and a retention index of 0.659. Exclusion of Blikanasaurus from the analysis following Upchurch et al. [71] resulted in the recovery of 18 MPTs of 767 steps, with a consistency index of 0.387 and a retention index of 0.659. Strict consensus of this analysis (Fig. 12B) recovered a Seitaad as part of a poorly resolved prosauropod clade in contrast to the recent results of Yates et al. [72]. Support for this clade consists of a single synapomorphy: ratio of proximal width of metacarpal I to length greater than 1.0 (Character 189: 0R1; convergently present in Melanorosaurus). With the exception of Adeopapposaurus, character 189 is redundant with character 188 in the dataset. Exclusion of character 189 from the analysis reduces the number of MPTs to 8 (762 steps, CI 0.388, RI 0.660) and resolves many of the ingroup relationships among prosauropods in the strict consensus (Fig. 12C), placing Seitaad among plateosaurids (sensu Upchurch et al. [71]) and sister to a clade that includes Plateosaurus and Riojasaurus. Support for this clade consists of four unambiguous synapomorphies: strap-shaped scapular blade with subparallel margins in lateral view (Character 157: 1R0; convergently present in Efraasia, Saturnalia, Lufengosaurus, Shunosaurus, Omeisaurus); caudal margin of acromion arises at less than 65 degrees form the long axis of the scapular blade (Character 158: 1R0; convergently present in Thecodontosaurus, Melanorosaurus, Jingshanosaurus, Kotasaurus, Efraasia, Antetonitrus); craniocaudal length of distal pubic expansion divided by pubis length less than 0.15 (Character 228: 1R0; convergently present in Saturnalia, Efraasia, Anchisaurus, Antetonitrus); and ungual on pedal digit I shorter than some pedal phalanges (Character 285: 1R0; convergently present in Thecodontosaurus (as Asylosaurus [53]), Saturnalia, Massospondylus). The recovery of a monophyletic Prosauropoda in this modified Upchurch et al. [71] dataset is notable in context of the recent results of Yates et al. [72] that recovered a paraphyletic assemblage of single lineages and small sub-clades along the stem of Sauropoda. A posteriori exclusion of Adeopapposaurus suggests that the inclusion of this relatively complete taxon in this analysis causes this shift back to a monophyletic assemblage of prosauropods. However, in this analysis, Prosauropoda does consist of a smaller subset of taxa than in the original iterations of the main dataset [71], with Anchisaurus (Ammosaurus) and Gyposaurus found to be closer to Sauropoda in agreement with the topologies of Yates [24,64] and Yates et al. [72].
The conflicting placement of Seitaad among sauropodmorphs in both analyses likely stems from the variable taxon and character sampling among the two analyses and the incomplete nature of the holotype of Seitaad. Both analyses are heavily weighted with cranial and vertebral characters that cannot be evaluated for Seitaad. Nevertheless, both analyses support inclusion of Seitaad in the clade Plateosauria sensu Yates [64] as a derived taxon closely related to either Plateosaurus and other plateosaruids or Adeopapposaurus and Massospondylus in a reduced Massospondylidae. Further, the analyses do not support close association between Seitaad and the eastern North American taxon Anchisaurus (Ammosaurus) as has been suggested for other sauropodomorph remains from the Navajo Sandstone [17,30].
Morphological similarities between Seitaad and plateosaurid and massospondylid taxa are therefore not unexpected given the cosmopolitan distribution of other members of the clade and the intermediate position of North America. The possible close relationship between Seitaad and the Early Jurassic 'southern' taxa Adeopapposaurus and Massospondylus is notable given previous inferred links between these two areas based on sauropodomorph specimens [2,6,16] and theropod specimens [76] from the underlying Kayenta Formation. Ultimately, further resolution of the phylogenetic position of Seitaad and a more thorough understanding of other basal sauropodomorph remains from the Kayenta Formation [2,6,16,27] will permit better insight into the role of this biogeographically significant region in analyses of Early Jurassic continental biotas.

Nomenclatural Acts
The electronic version of this document does not represent a published work according to the International Code of Zoological Nomenclature (ICZN), and hence the nomenclatural acts contained herein are not available under that Code from the electronic edition. A separate edition of this document was produced by a method that assures numerous identical and durable copies, and those copies were simultaneously obtainable (from the publication date listed on page 1 of this article) for the purpose of providing a public and permanent scientific record, in accordance with Article 8.1 of the Code. The separate print-only edition is available on request from PLoS by sending a request to PLoS ONE, 185 Berry Street, Suite 3100, San Francisco, CA 94107, USA along with a check for $10 (to cover printing and postage) payable to ''Public Library of Science''.
The online version of the article is archived and available from the following digital repositories: PubMedCentral (www.pubmedcentral. nih.gov/), and LOCKSS (http://www.lockss.org/lockss/). In addition, this published work and the nomenclatural acts it contains have been registered in ZooBank (http://www.zoobank. org/), the proposed online registration system for the ICZN. The ZooBank LSIDs (Life Science Identifiers) can be resolved and the associated information viewed through any standard web browser by appending the LSID to the prefix ''http://zoobank.org/''. The LSID for this publication reads as follows: pub:498FF4CB-D04B-409D-B255-AFB09268BDE8

Supporting Information
Dataset S1 Nexus file of the character-taxon matrix used for the phylogenetic analysis based on Yates [2007]