Skip to main content
Advertisement
Browse Subject Areas
?

Click through the PLOS taxonomy to find articles in your field.

For more information about PLOS Subject Areas, click here.

< Back to Article

Table 1.

The design condition performance of the PG9351FA gas turbine.

More »

Table 1 Expand

Fig 1.

Correction of the compressor characteristic curve under design conditions.

More »

Fig 1 Expand

Fig 2.

Compressor characteristic curve change correction.

More »

Fig 2 Expand

Table 2.

Off-design modeling factors for characteristic curves at various corrected speeds.

More »

Table 2 Expand

Fig 3.

Results of modulization method.

More »

Fig 3 Expand

Fig 4.

Estimated results when CS=0.946.

More »

Fig 4 Expand

Fig 5.

Estimated results when CS=0.971.

More »

Fig 5 Expand

Fig 6.

Estimated results when CS=1.00.

More »

Fig 6 Expand

Fig 7.

Estimated results when CS=1.02.

More »

Fig 7 Expand

Fig 8.

Estimated results when CS=1.062.

More »

Fig 8 Expand

Table 3.

Assumed operational settings and performance parameters of the actual gas turbine.

More »

Table 3 Expand

Table 4.

List of model parameters to be estimated.

More »

Table 4 Expand

Table 5.

Speculative results based on simulated data.

More »

Table 5 Expand

Table 6.

Table of measurement equipment errors.

More »

Table 6 Expand

Table 7.

List of parameter estimation results corresponding to different simulation experimental data.

More »

Table 7 Expand

Table 8.

List of parameter estimation results corresponding to different simulation experimental data.

More »

Table 8 Expand

Fig 9.

Overlay of predicted and measured pressure.

More »

Fig 9 Expand

Fig 10.

Overlay of predicted and measured flow rates.

More »

Fig 10 Expand

Fig 11.

Overlay of predicted and measured low-temperature points.

More »

Fig 11 Expand

Fig 12.

Overlay of predicted and measured high-temperature points.

More »

Fig 12 Expand