Skip to main content
  • Loading metrics

A Motor-Gradient and Clustering Model of the Centripetal Motility of MTOCs in Meiosis I of Mouse Oocytes


Asters nucleated by Microtubule (MT) organizing centers (MTOCs) converge on chromosomes during spindle assembly in mouse oocytes undergoing meiosis I. Time-lapse imaging suggests that this centripetal motion is driven by a biased ‘search-and-capture’ mechanism. Here, we develop a model of a random walk in a drift field to test the nature of the bias and the spatio-temporal dynamics of the search process. The model is used to optimize the spatial field of drift in simulations, by comparison to experimental motility statistics. In a second step, this optimized gradient is used to determine the location of immobilized dynein motors and MT polymerization parameters, since these are hypothesized to generate the gradient of forces needed to move MTOCs. We compare these scenarios to self-organized mechanisms by which asters have been hypothesized to find the cell-center- MT pushing at the cell-boundary and clustering motor complexes. By minimizing the error between simulation outputs and experiments, we find a model of “pulling” by a gradient of dynein motors alone can drive the centripetal motility. Interestingly, models of passive MT based “pushing” at the cortex, clustering by cross-linking motors and MT-dynamic instability gradients alone, by themselves do not result in the observed motility. The model predicts the sensitivity of the results to motor density and stall force, but not MTs per aster. A hybrid model combining a chromatin-centered immobilized dynein gradient, diffusible minus-end directed clustering motors and pushing at the cell cortex, is required to comprehensively explain the available data. The model makes experimentally testable predictions of a spatial bias and self-organized mechanisms by which MT asters can find the center of a large cell.

Author Summary

Recent microscopy based time-lapse measurements of spindle assembly in the absence of pre-existing centrosomes, have improved our understanding of the principles of self-organization at a cellular scale. Mouse oocytes meiosis is one such example, where radial microtubule (MT) arrays, or asters, nucleated by MT organizing centers (MTOCs) centripetally converge on the central chromatin mass and reorganize to form a bipolar structure. This centripetal motility resembles a biased ‘search-and-capture’ process. Here we attempt to test whether such a bias is necessary and if so, to define the form and nature of the bias. We quantify the statistics of the experimentally measured motility and find MTOC transport involves both “pulling” from the center and “pushing” from the cortex. We hypothesize that the bias consists of a spatial gradient of forces driving this motility. To test this hypothesis, we develop a model of a random walk with drift in the mouse oocyte geometry. By optimizing the functional form of the drift field to experimental data, we then explore which minimal combination of molecular motors and dynamic instability parameters in such a gradient, could result in the generation of asymmetric forces. When minus-end directed dynein-like motors are localized in a gradient around chromatin, it reproduces the experimental spatio-temporal dynamics. By themselves, MT regulatory gradients, clustering motor complexes and cortical pushing fail to reproduce experimental statistics. A combination of the motor-gradient and clustering motors appears to explain all the available experimental statistics. Our findings suggest a possible functional role for previously observed enrichment of dynein around chromatin in mouse oocytes, and address how MTs asters find the center of a large cell, without the predominance of cortical interactions.


Spindle assembly in higher eukaryotic cells involves the self-organization of microtubules (MT) into a bipolar structure. During mitosis in animal cells, spindle poles are defined by a pair of centrosomes. However bipolar structures emerge even in the absence of centrosomes during meiosis in vertebrates as well as mitosis in plants. In such acentrosomal spindles, the poles self-organize by the dynamic interactions of MTs with molecular motors, regulatory factors and chromatin. While multiple components of this cellular-scale pattern forming system have been identified, the precise nature of the interactions between the components are still not completely understood.

The meiotic maturation of mouse oocytes is a well studied example of such an acentrosomal spindle assembly system. The first meiotic division is characterized by germinal vesicle breakdown (GVBD) [1], before and after which small aster-like fibrillar structures or microtubule organizing centers (MTOCs) are observed [2]. MTOCs which are nucleated both in the cytoplasmic and peri-nuclear spaces, both aggregate at the center to form a spindle by prometaphase I [3]. Such a convergence of radial MT arrays or asters was reported previously in Xenopus meiosis II oocytes [4]. Using cell-free Xenopus oocyte extracts, this convergence was shown to result from asymmetric centrosomal MT growth due to a gradient of RanGTP [57]- referred to as biased ‘search-and-capture’. However during meiosis I in mouse oocytes, experimental perturbation of RanGTP levels does not significantly affect spindle assembly [8, 9]. If RanGTP does not act as a guidance cue as reported previously [10], the nature of the directional cue and force generation remains to be understood.

The force required for MTOC convergence to the nuclear region is thought to originate from a combination of MTs, motors and anchorage points. Multiple mechanisms have been reported in the past to drive radial MT array transport in cells- (a) polymerization dependent pushing forces as seen during the centering of asters in vitro [11, 12], (b) cortical force-generator based pulling [13], (c) cortical motors which both depolymerize and pull [14], (d) cytoplasmic minus-ended motors which pull asters in a length-dependent manner [15], (e) cytoplasmic streaming by cargo transport driving aster movement [16, 17] and (f) acto-myosin contractility as seen in starfish oocytes [18]. Contact with the cell cortex can move asters when the relative MT lengths is comparable to the cell radius [19]. Both active and passive mechanisms drive the movement of centrosome nucleated asters. However most of the cortical pushing and pulling models are unlikely to affect long-range movement of MTOCs which have MT lengths ∼3 μm as compared to the cell-radius of ∼40 μm. Transport of asters by cytoplasmic streaming based on cargo transport by one large aster [17], is also unlikely to drive mouse meiosis I oocyte MTOCs due to their size and number (∼80 to 100), which will prevent a coherent and directed flow. Inhibition of acto-myosin contractility has also been shown to have no effect on the centripetal movement of mouse MTOCs [9]. While centrally-anchored MTOCs and cross-linking motors have also been proposed by Schuh et al. [9] to drive the MTOC motility, the movement continues even after nuclear envelope breakdown (NEBD). Thus for a complete theoretical understanding of the mechanism by which MTOCs converge in spindle assembly a mathematical model of the process is necessary to test multiple hypotheses that have been proposed.

Theoretical models have been used to probe the interactions of microtubules and motor complexes and are capable of reproducing in vitro self-organized patterns [2022]. These simulations have been extended to understand the role of multiple components in spindle assembly such as antiparallel interactions [23], pole focussing by minus-end directed motors [24], gradients of stabilization [25] and intra-spindle nucleation and dynamic instability regulation [26]. In recent work, we have demonstrated the centripetal movement of centrosomal MT asters towards surface immobilized chromatin in Xenopus egg extracts can be modeled by a gradient of polymerization dynamics and uniform motor distribution [27]. This is comparable to a model of length-dependent pulling by motors to translocate MT asters during C. elegans embryogenesis [15]. However, neither of these models take into account the relatively shorter MTs seen in MTOC asters, and lack details specific to meiosis I. In search of common design principles in spindle assembly, theoretical modeling of the centripetal motility of MTOC arrays can be used to test the generality of previous results.

Here, we quantify the spatial trends in MTOC motility and find the random and directional components of motility depend on how far the MTOCs are from the cell center. The detailed quantitative analysis allows us to develop and test theoretical models of random walk with drift. Only a spatial gradient of drift can reproduce the experimental data. Such an optimized gradient is further used to model MT dynamic instability and motor distributions, to test the combination of mechanisms that can reproduce the experimental statistics of centripetal MTOC motility.


We have developed two kinds of models- phenomenological and mechanistic- to address both the general principles and specific mechanisms of the centripetal convergence of small MT asters, MTOCs. The models are:

  1. 2D Random walk with drift (RWD) model
  2. 2D MT-motor model

The outputs of both models are compared to 2D experimental motility measures of MTOCs from mouse oocyte meiosis I reported previously by Schuh and Ellenberg [9] The RWD model is used to optimize the functional form of the spatial drift field by comparison to experiment, while the MT-motor model is used to test molecular mechanisms which could generate the drift field. Mechanisms that have been previously hypothesized to drive asters to the center of cell involve MT-pushing and pulling [28, 29]. A combination of pulling and pushing mechanisms has been experimentally tested in sand-dollar eggs [30] and C. elegans embryos [16, 31] and pulling alone in Xenopus egg extracts [5, 27], while pushing has been seen in fibroblasts [32]. The MT-motor model is used to test whether the reported self-organized clustering of MTOCs in mouse oocytes [9] is sufficient to result in MTOC convergence, or whether additional mechanisms are necessary. These mechanisms are:

  1. Self-organized mechanisms: not requiring explicit spatial localization
    1. Cortical pushing alone
    2. Clustering motors and cortical pushing
  2. Spatial gradients: requiring explicit spatial localization
    1. MT dynamic instability gradient
    2. Dynein motor gradient
  3. Hybrid model: combination of self-organized and gradient mechanisms

An optimization routine has been developed to compare the outputs of the ‘scenarios’, i.e. combinations of these mechanisms, to reproduce previous experimental reports of mouse meiotic MTOC motility and distribution [9, 33, 34].

The choice of a 2D model for a 3D spherical oocyte is determined by the need to compare simulated motility outputs with the only available experimental time-series dataset of MTOC motility in mouse oocyte meiosis I, which is 2D over time [9] (Fig 1A). This compatibility of dimensions is essential since some of the RWD model input parameters are obtained from fits to experiment and MT-motor model mechanisms are optimized based on their ability to reproduce experimental statistics. Additionally, the choice of dimensionality of spatial models is considered to be determined by the balance between the need to capture the behavior of the system sufficiently and the clarity of the model [35].

Fig 1. Optimizing the random walk with drift (RWD) gradient to experiment.

(A) The experimentally measured 2D trajectories of MTOCs from mouse oocytes (from previous work [9], replotted based on raw data provided by the authors) are modeled by (B) a 2D RWD model with the concentric cytoplasmic and chromatin regions of radius rcyto and rchr respectively. The cytoplasmic motility of MTOCs from their initial positions (open circle) to final positions (closed circle) is driven by a field of drift (small arrows). (inset) The direction of motion is determined by the Brownian (θdf) and directed (θdr) components. (C) The functional forms of the fields of attraction, (blue) and repulsion, (red), as a function of radial distance to chromatin (r) is determined by the respective r1/2 and s values. The optimized gradient results in (D) XY trajectories from simulation (colors indicate individual tracks), (E) directionality (χ) (mean ± s.d.) as a function of radial distance from simulation (red) compared to experiment (black) and (F) the frequency distribution of capture time (tc) from simulation (black) compared to experiment (grey).

Random walk in a drift field

The mouse oocyte is modeled in a 2D circular geometry of radius rcell, with concentric circular chromatin of radius rchr. The outer cytoplasmic region has a radius rcyto and rcell = rchr + rcyto (Fig 1B). MTOC asters are modeled as point particles, nucleated uniformly in the cytoplasmic space of the oocyte. The motion of the simulated particles is a mixture of random Brownian and directed centripetal motion, depending on the position of the MTOC in the oocyte (Fig 1B), based on the previously observed ‘stop and go’ nature of the motility [9]. In this model, MTOCs are transported to the cell center and ‘captured’ by the chromatin once they reach the central chromatin mass. The process resembles models of biased ‘search-and-capture’ used to describe spindle assembly [7, 36, 37]. Here, we use the model to define the spatial properties of the bias of attraction by comparing the simulation outputs to spatial trends in MTOC motility seen in experiment.


The Brownian component of the motion results from radial MTs in an aster interacting with motors in all directions resulting in uniform forces, which fluctuate due to thermal noise and microtubule dynamics [27]. The equation of motion of the particle is given by its velocity () and net angle (θnet). The magnitude of the velocity is described by: (1) where Deff is the effective diffusion coefficient, veff is the effective velocity and t is time. The values of Deff and veff are determined by fits to experimental data as described in the section on data analysis and listed in Table 1.

Table 1. RWD model parameters.

Parameters are used from literature and fits to experimental data.


The net angle (θnet) of motion, which governs the direction of motion, is determined by: (2) where θdf is the diffusive and θdr the directed angle. The angle θdf can take random values uniformly distributed between 0 and 2π, while θdr is determined by the angle of the vector between the particle () and the center () of the cell (Fig 1B).

Drift field.

Sub-cellular transport has been successfully modeled in previous work by combining Brownian motion and directed transport [38]. In our model, the Brownian and directed components are spatially determined. Here, two radially symmetric fields of drift, one repulsive and one attractive, were modeled to represent the effective forces acting on the MTOCs. The attractive field resulting in centrosomal aster convergence in Xenopus oocytes towards chromatin [5], was modeled by a sigmoid gradient [7, 27], A similar function was tested for the model of mouse oocytes. Since the attractive () and repulsive fields () determine the nature of motion, depending on the position of the particle in space, the net velocity of a particle () is given by: (3) where is the velocity at the cell cortex determined by the weighted average of repulsion and Brownian motion. is determined by: (4) In this model, attraction originates from the central chromatin, since the removal of the nucleus in previous experiments resulted in MTOCs losing their directionality of motion [9, 39]. The repulsion from the cell cortex, is based on models of MT-aster pushing at the cell cortex as a mechanism of centering in multiple cell types [28, 29]. MTOCs undergo Brownian motion when neither attraction nor repulsion are acting on them. The net angle θnet(X) is the circular weighted average [40] of θdf and , weighted similarly to the velocity magnitude (Eqs 3 and 4).

The fields of and are modeled in 2D by radially symmetric functions dependent solely on the distance r from chromatin. A modified sigmoid gradient was tested, based on previous experimental measurements of long-range gradients acting on MTs around chromosomes in Xenopus spindle assembly [57] and theoretical models testing their form [25, 26] and their role in centrosome directional motility [27].

The field (ϕ) of either attraction (ϕa) or repulsion (ϕr) is determined by: (5) where r is the distance- for ϕa, r = 0 at the chromatin edge and for ϕr, r = 0 at the cell boundary. r1/2 is the distance at which the function takes the half-maximal value and 1/s is the steepness factor. While exponential gradients were also tested, they failed to reproduce the spatial trend in experimental data and are not shown here. Representative gradients of ϕa and ϕr are plotted as scaled values between 0 and 1 (Fig 1C).

Mechano-chemical model of MT-motor interactions

A mechanistically detailed model was developed using Cytosim [41], a C++ Langevin dynamics simulation engine, by building on previously developed models of MT-mechanics [14, 42], polymerization kinetics [7, 25] and motor interactions [2024, 26, 27, 43]. To test what minimal components will produce the observed centripetal motility of MTOC asters, a model of an MT stabilization gradient described previously [27] was developed by mapping the gradient shape optimized in the RWD model. This scenario was compared with scenarios where the gradient consisted of immobilized minus-ended molecular motors. These biased ‘search-and-capture’ scenarios were contrasted with self-organized scenarios which lacked any directional bias, i.e. diffusible motor-complexes and MTOC pushing from the cell boundary. The model is implemented in an oocyte cell geometry with MT polymerization dynamics and mechanics as well as discrete stochastic molecular motors that are either immobilized or diffusible.

Cell geometry.

As before the oocyte was modeled in a 2D circular geometry with a concentric chromatin region. The chromatin region here is not treated as an absorber in this model, unlike in the RWD model.

MT polymerization dynamics and mechanics.

MTs were modeled as discrete polymers undergoing dynamic instability- stochastic switching between growth and shrinkage phases- based on the four-parameter model [44, 45]. Since dynamic instability parameters of meiosis I mouse oocytes are not reported, values were taken from measurements made on centrosomal MTs in mitotic pig kidney cells, which have average MT lengths of 3.2 μm [46], very similar to the average length of MTs in mouse meiotic MTOCs (<L > ∼3 μm) [2, 3, 33]. The flexibility of the simulated MTs is defined by a combination of bending modulus (κ), typical cytoplasmic viscosity and thermal energy. The values of these parameters were taken from literature (Table 2), from the mouse oocytes or related systems, if mouse data was not available.

Table 2. MT-motor model parameters.

The mecho-chemical parameters of motors were based on reported values for dynein, while motor densities were estimated. MT polymerization dynamics and mechanics is taken from literature, while cell geometry parameters are identical to Table 1.


MTOCs were modeled as hollow circular structures of radius 0.2 μm, initialized randomly throughout the cytoplasmic region. Each MTOC had NMT number of MTs uniformly distributed radially around the centrosome, forming an aster. MTOCs can move throughout the cell interior.

Motor mechanics.

Molecular motors were modeled as described previously [27, 42] as discrete particles with properties taken from minus-end directed dynein-like motors moving at a velocity vm. Motors bind stochastically to MTs at an attachment rate rattach only if the distance between them is less than a threshold distance of attachment (dattach). Detachment occurs at a rate rdetach. Motors bound to MTs behave like Hookean springs with a spring constant (kmot), experiencing a extension force (fex) parallel to the filament if attached to a motile filament. The rate of detachment increases with extension as: (based on Kramers theory [47]), where is the constant basal detachment rate and f0 stall force. A separate rate accounts for the rate at which motors detach from the end of a filament- here it is set to a value similar to . As fex increases to values approaching f0, motor step sizes are expected to change, referred to as the ‘gear-like’ behavior of dynein [48]. This is modeled by a piece-wise approximation, as previously described [27, 49]. The parameters of motor mechanics, when available, are taken from experimental measurements of dynein (Table 2). In the absence of reported values estimates were used. Immobilized motors bind to microtubules and generate forces on the MTs causing their movement. Conversely, diffusible motor complexes with diffusion coefficient Dc, are modeled as crosslinkers [23], which can bind two different microtubules. Since aster have minus-ends at the center, cross-linking minus-end directed motility of the motors results in coalescence of the MTOCs.

Aster motility.

MTOC asters move due to a net force calculated by resolving multiple forces acting on the MTs (using a finite difference scheme to solve the Langevin equation of motion in Cytosim [42]) which are: (a) fbend, arising due to bending of growing MT filaments contact the rigid cell boundary and scaled by the bending modulus of MTs (κ) [11, 12, 50]; (b) , the extension force generated when immobilized motors bound to MTs walk on the filament and are stretched by length x, experience a restoring force , resulting in filament motion [42]; (c) , the motor-complex of diffusible tetrameric motors have two binding sites separated by a spring of stiffness kmot. Complexes that are simultaneously bound to two MTs, undergo stretching. The restoring spring force brings the two MTs close and results in clustering [20, 22, 23]; (d) fdiff, the diffusive force is a random normally distributed force [42]; and (e) fdrag, the drag force acting on the MTs resulting from the translational and rotational drag forces on the individual points representing the filament [42] based on the cytoplasmic viscosity (η). Parameters are reported in Table 2.


Data analysis.

Experimental 2D trajectories of multiple MTOCs in mouse oocytes meiosis I described previously by Schuh and Ellenberg [9] with Δt ≈ 3 to 4 minutes) ranging between pre- and post-NEBD stages (data kindly shared by M. Schuh) were normalized by origin shift to the respective end-points. Thus, multiple experimental trajectories could be compared. For comparison with experiment, simulated trajectories were down-sampled to a time-interval comparable to experiment (Δt = 3.5 minutes), and the following measures of motility were evaluated from both experimental and simulated data:

Motility statistics: The instantaneous velocity v = δL/δt and directionality or tortuosity (χ) was estimated as χ = dnet/L. A value χ = 1 indicates directional motion, while χ ∼ 0 indicates a random (tortuous) path. The time taken by MTOCs from their time of nucleation to arrive at the edge of the central chromatin region is used to calculate a ‘capture time’ from both experiments and simulations. The mean square displacement (msd) of experimental and simulated trajectories was estimated by: (6) where r is the displacement, t is the time point, δt is the time increment. A sliding window of δt from the smallest simulated time step to 3/4th of the trajectory length was used [27]. This empirically determined cut-off reduces artifacts arising from the fact that the number of steps of time-length greater than this threshold are extremely small [58, 59].

In order to estimate input parameters for the RWD model (Eq 1), the msd profiles of experimentally measured MTOCs were fit to the model of diffusion and transport: (7) On the other hand, the msd output from the motor-MT interaction model (Models section) were quantified by fitting to an ‘anomalous diffusion’ model: (8) to estimate the apparent diffusion coefficient (D′) and the anomaly parameter (α) as described previously [27] (S1 Text). All data fitting was performed using the trust region reflective least square fitting algorithm implemented in the Optimization Toolbox of MATLAB (Mathworks Inc, USA).


The RWD simulation time steps were optimized for numerical stability, by simulating a normal random walk (α = 1) with no boundary conditions and minimizing the error in input and fit diffusion coefficient (D). Simulations with typically 100 particles were run for 8 ⋅ 103 seconds and took ∼20 minutes. The explicit MT-motor model (Cytosim) with 80 MTOCs was run for 1.2 ⋅ 103 seconds, typically requiring ∼8 hours on a 12 core Intel Xeon machine with 16 GB RAM.

Model optimization to experiment.

The parameters of the model were optimized by a rank minimization method based on a modified weighted root mean square error (ϵ) of simulations as compared to experiment. Only one published dataset by Schuh and Ellenberg [9], has reported detailed XY over time trajectories of MTOC centering motility during mouse oocyte maturation, as a result of which quantitative model optimization was performed on this dataset (kindly provided by M. Schuh). The error (ϵ(k)) for a parameter set k was estimated between the ith experimentally measured (ei) and simulated (si) values by: (9) The weight (wi) was determined based on whether the simulated value was within one σ of the average experimental measure or outside that range: (10) where wm = 2, ni is the number of experimental data-points for the ith value and nmax is the maximal number of data-points in experiment. This weighting scheme allows us account for the increased uncertainty in experimental measurements with fewer data points. The choice of wm was set empirically to 2 to ensure a high penalty (since ni/nmax ≤ 1). For each parameter set the ϵ of multiple variables (v) were ranked (Rv(k)). The directionality (χ) distribution with distance (r) and frequency distribution of capture times (tc) were used to calculate errors. The sum rank, Rs = Σv Rv(k) was minimized to obtain a parameter set, referred to as optimal.


RWD simulated MTOC motility compared to experiment

The experimental trajectories of MTOCs show a distinct centripetal motion as seen in the time-projected trajectories (Fig 1A). The input parameters for diffusive and directed motion in the RWD model (Fig 1B) were obtained from fitting Eq 7 to experimental msd profiles (S1A Fig) and obtaining the mean Deff (S1B Fig) and veff (S1C Fig). As a result, the nature of the centripetal motility depends solely on the parameters determining the field of drift. We optimize the parameters that determine the shapes of both attractive (ϕa) and repulsive (ϕr) fields (Fig 1C) by scanning 600 possible combinations, and minimizing the sum rank of errors (S2A Fig) obtained from the ranked errors (ϵ) between simulated and experimental values of χ and tc. Our minimization scheme identifies the optimal gradient to be a long range attractive gradient (r1/2 = 10 μm and s = 1) and a short range repulsive gradient from the cell boundary (r1/2 = 0 μm and s = 2) based on directionality and capture time. While the error (ϵ) minima do not coincide (in terms of gradient parameters) between χ (S2B Fig) and tc alone (S2C Fig), our sum-rank scheme gives us a global optimum. The outputs of such a gradient result in XY trajectories which are directed inwards at the cell boundary, random in the mid-zone and directed closer to chromatin (Fig 1D), qualitatively comparable to experiment (Fig 1A). Quantitative comparisons between experimental and simulated χ profile reflects this trend in motility- particles at the cell boundary and near chromatin are more directed, than those in the mid-zone (Fig 1E). The simulated capture time distribution also matches with experiment (Fig 1F). In order to understand the mechanism underlying the experimental motility observed, trajectories were further analyzed for their time-dependence.

Pushing and pulling profiles in MTOCs transport

The experimentally measured MTOCs have heterogeneous distance-time profiles, with some MTOCs moving rapidly in < 40 min, while others undergo a delayed (> 40 min) inward movement (Fig 2A). The optimized RWD model profiles qualitatively match those from experiment. In previous work, distance-time plots with a sigmoid profile have been interpreted to mean pulling forces are at work, while a parabolic has been interpreted to mean pushing is at play [15]. Here, we use a fit function with three parameters, n: a measure of the shape of the profile (n > 1: sigmoid and n ≤ 1: parabolic), Thalf: the time at which the distance travelled is half-maximal, and dmax: the maximal distance travelled, as follows: (11) The experimental and RWD simulation distance-time plots were fit to obtain dmax, Thalf and n. A value of n > 1 is taken to indicate pulling, while n ≤ 1 is taken to indicate pushing. Representative data from experiment (Fig 2C) chosen based on their nucleation position close to chromatin (dn = 7.05 μm), mid-way in the cytoplasm (dn = 15.49 μm) and close to the cell membrane (dn = 26.36 μm), show an apparent pattern in the n values- high in the mid-zone and low close to chromatin and near the cell boundary. Representative plots from the optimized RWD simulations (Fig 2D) with dn = 7.03 μm, dn = 14.01 μm and dn = 24.88 μm show a similar trend in the values of n. When the n from all experimental data (S3 Fig) is compared to simulated fits for different positions of nucleation, a qualitative match is observed (Fig 2E). The n value from simulations is higher in the mid-cell region as compared to near chromatin or at the cell boundary. This can be understood in terms of the sharp transition in the attractive gradient of drift (ϕa) at r ≈ 15 μm, resembling a ‘pulling’ process. The phenomenological model does not allow an interpretation of the origin of pushing or pulling forces. We therefore proceeded to add detailed molecular-motor and MT polymerization dynamics to the model to make experimentally testable predictions about the system.

Fig 2. Distance travelled by MTOCs in experiment and simulation.

The distance travelled from the site of nucleation is plotted as a function of time from (A) experiment and (B) optimized RWD gradient model. Colors indicate individual tracks. Representative fits (black line) to Eq 11 of data from (C) experiment and (D) simulation. Blue and red indicate the axes which scale the respective distance-time graphs. dn is the distance from chromatin where the MTOC is nucleated and n is the cooperativity coefficient from the fit. (E) The fit values of n from experiment (blue) and simulation (red) are plotted as a function of dn. The goodness of fit R2 > 0.7 for all plots.

Mechanistic models of MTOC centering: Gradient and Self-Organized Models

The RWD model predicts two drift fields- attractive from the center and repulsive from the cell boundary- are required to reproduce experimental statistics. Here, we proceed to test molecular mechanisms which combine molecular motors, MT-dynamics and mechanics of MTs and membrane interactions, with the aim of developing a mechano-chemical understanding of the effective drift fields. We categorize these mechanisms into two types:

  1. Self-organized
  2. Gradient-based

We then systematically evaluate plausible mechanisms and evaluate them for their ability to result in MTOCs finding the center of the oocyte within an experimentally observed time-scale (∼20 min).

(i) Self-organized mechanisms.

(a) Cortical pushing. In somatic cells the MT-asters find the center of a cell entirely based on pushing interactions at the cell cortex [32]. We test if pushing from the cell boundary alone, could result in MTOC centering, while maintaining uniform MT polymerization and immobilized dynein-like motors (Fig 3A). MTOCs at the start of the simulation are localized randomly throughout the oocyte (Fig 3B). However even after 20 minutes, asters did not move centripetally (Fig 3C, S1 Video).

Fig 3. MT-motor model scenarios.

(Left column) The distributions of fcat (red), fres (blue) and motor density of immobilized minus-ended motors (green) and (at t = 0) diffusible minus-ended motor complexes (purple) are plotted as a function of radial distance from the oocyte center. (Middle column) Simulation output at t = 0 minutes and (Right column) t = 20 minutes with MTOCs (grey) and a concentric nucleus (blue circle) with immobilized minus-ended motors (green dots) and diffusible tetrameric motor complexes (purple dots). Scenarios simulated: (A, B, C) Uniform distribution of fcat and fres and surface-immobilized motors motors/oocyte, f0 = 7 pN (green dots). (D, E, F) Diffusible minus-end directed motor complexes motors/oocyte, f0 = 7 pN (purple dots) and uniform fcat and fres. (G, H, I) Gradients of fcat and fres with uniform immobilized minus-ended motors motors/oocyte, f0 = 7 pN (green dots). (J, K, L) Gradient model of motor density with motors/oocyte, f0 = 7 pN and uniform fcat and fres values. Scalebar 10 μm.

(b) Clustering motors and cortical pushing. Based on the self-organized centripetal motility of MTOCs observed experimentally in mouse oocytes, clustering motor complexes had been proposed to be the major driver of MTOC motility to the center of the cell [9]. As a result, we modeled diffusible minus-end directed (dynein-like) motor complexes uniformly in the cytoplasmic region (Fig 3D and 3E). These complexes couple two nearby MT filaments and as a result of minus ended-motility, result in clustering of the asters (since asters have their minus-ends at the MTOC center). In this scenario, dynamic instability parameters were uniform and no immobilized motors were modeled. The complexes diffuse through the whole cell including the chromatin region within ≈ 30 s, mimicking start of NEBD (S2 Video). However even after 20 min of simulations, only a small fraction of the simulated MTOCs are inside the chromatin region (Fig 3F, Table 3).

Table 3. Percentage of MTOCs captured.

After 20 min simulation time the proportion of MTOCs captured were evaluated for the different scenarios in the mechanistic models and compared to experimental values on a similar time-scale. Values are estimated from 10 runs of a typical simulation with 80 MTOCs each.

(ii) Gradient-based mechanisms.

(a) MT dynamic instability gradient. Based on evidence of a gradient of dynamic instability in multiple cell types [5, 7, 10, 36], we tested a gradient of fcat and fres as a mechanism for centering of asters, while maintaining a uniform surface-immobilized motor distribution (Fig 3G) and random MTOC nucleation (Fig 3H). However, this too did not result in a perceptible increase in accumulation of MTOCs at the chromatin center at the end of 20 minutes (Fig 3I, Table 3, S3 Video).

(b) Dynein motor gradient. It was only when motors were localized in a chromatin-centered sigmoid gradient and dynamic instability parameters were homogeneous (Fig 3J), did the randomly nucleated MTOCs (Fig 3K) dramatically converge to the center (Fig 3L, S4 Video).

Thus, a minimal model of asymmetric pulling forces resulting from a gradient of immobilized motors can move MTOCs to the center of the cell in a time-scale comparable to experiments (∼20 min). However, a quantitative comparison of the simulation statistics with experiment is necessary to understand the critical parameters in this model.

Model sensitivity to stall-force and density of motors and MTs per aster

In the previous section, qualitatively, self-organized mechanisms of MTOC centering could not drive centripetal motility. The spatially binned directionality (χ) of simulated MTOCs in the absence of any gradient further quantifies this (Fig 4A). Neither tetrameric motor complexes, nor uniform surface immobilized motors and pushing at the cell boundary result in a trend in χ comparable to experiment. Cross-linking by motor complexes of different stall forces (f0 = 2 and 7 pN) and densities ( and 104 motors/oocyte) were tested and higher stall forces with high densities result in high values of χ throughout the cell (> 0.5). A directional bias in the form of a field of fcat and fres (based on Eq 5) resulting in asymmetric MT lengths, also fail to reproduce the directionality trends (Fig 4B). Confirming our qualitative observations from the simulation visualization, only a gradient of motors (f0 = 7 pN, ) can reproduce most of trend in directionality as a function of distance (Fig 4C and 4D).

Fig 4. Directionality of simulated MTOCs compared to experiment.

The distance dependence of binned directionality (χ) from experiment (black line) is compared to multiple simulated scenarios. (A) Uniformly distributed motors which are either immobilized weak (f0 = 2 pN) (red) or strong (f0 = 7 pN) (green) dynein-like motors with motors/oocyte are compared to tetrameric diffusible minus-end directed dynein like motor complexes with f0 = 2 pN (blue) and f0 = 7 pN (orange), with motors/oocyte. (B) The χ resulting from a gradient of fcat and fres (green) is compared to a gradient of the immobilized motors ( motors/oocyte, f0 = 7 pN) (blue). In a gradient of immobilized motors with (C) f0 = 2 pN and (D) f0 = 7 pN the radial distribution of χ is plotted for increasing motor densities: (purple), 103 (green) and 104 motors/oocyte (blue). All values of χ are mean ± s.d. Simulations were averaged from 10 runs with 80 MTOCs each.

In the absence of experimental estimates of the number of motors and their stall forces from meiotic mouse oocytes, we explore two extreme values of f0 (2 and 7 pN) reported in literature for dynein and scan over thee orders of magnitude. We find high density ( motors/oocyte) of weak motors (f0 = 2 pN) (Fig 4C) and a lower density ( motors/oocyte) of strong motors (f0 = 7 pN) (Fig 4D), can both reproduce experimental profiles of directionality. The proportion of MTOCs captured at the chromatin boundary was evaluated by following the distance of MTOC centers as they entered the chromatin mass. Strikingly the proportion of MTOCs captured in the first 20 minutes of simulation from the motor gradient with immobilized motors of f0 = 7 pN and most closely matched experiment (Table 3). However, the mean velocity values from simulations were insensitive to either f0 = 2 or 7 pN and motor densities over a range Nm = 102 to 104 motors/oocyte (Table 4).

Table 4. MTOC velocity in a motor gradient.

The mean instantaneous velocity (<v> ± s.d.) with increasing motor density was calculated from 20 min simulation time and compared to experiment.

Additionally to test how the motility was affected by the total number of MTs per aster in the scenario of a motor gradient, we examined the χ and <v> of simulated MTOCs which were initialized at a distance of 15 μm from the chromatin edge. As a result we expect these asters to experience the maximal force asymmetry, as they are at the lower end of the motor gradient. We find for increasing motor densities () directionality χ continues to increase, but increasing NMT per aster appears to rapidly saturate the χ value for any given value for both f0 = 2 and 7 pN (Fig 5A and 5B). Increasing leads to a marginal increase in the mean velocity (<v>) for a fixed NMT value. However increasing the value of MTs per aster, to our surprise, does not affect <v> (Fig 5C and 5D). We interpret this to be the result of the uniform radial distribution of MTs in the aster and a tug-of-war arising from it.

Fig 5. Effect of varying MTs per aster and motor density.

MTOCs in the optimized motor gradient nucleated at dn = 15 μm from the chromatin edge, were simulated for increasing MTs per aster (NMT): 20, 40, 60, 80, 100 and 120 (colors). (A, B) The directionality χ and (C, D) mean velocity (〈v〉) are plotted for f0 = 2 pN and, f0 = 7 pN for motor densities ranging between to 104 motors/oocyte (x-axis). All values are mean ± s.d. from 10 asters.

In order to further understand the role of motor-density changes and their effect on MTOC motility, we evaluate the random walk statistics of the motility and compare it to experiment.

A hybrid model of a motor-gradient and self-organized clustering enhances MTOC centering

Simulations of multiple gradient forms, motor types and densities in this work suggest a motor gradient as a minimal model to understand the centering motion of MTOCs in mouse meiosis I oocytes. However, we were unable to reproduce the experimentally observed χ ∼ 0.5, when MTOCs were 10-20 μm from the chromatin edge. Interestingly, the presence of the self-organized clustering motors (f0 = 7 pN, motors/oocyte) alone resulted in simulated χ values that matched experiment, in the radial distance between 10 and 20 μm (Fig 4A), due to MTOC aggregation. We hypothesized that a hybrid mechanism combining an immobilized motor-gradient with diffusible clustering motor-complexes might reproduce the complete experimental distance-dependent directionality profile. Visually the MTOCs appear to find the center more efficiently (Fig 6A and 6B). Here 104 clustering motors per oocyte of stall force 2 pN were combined with 104 immobilized motors per oocyte and stall force 2 pN. A systematic screen of the effect of increasing tetrameric complex density while keeping the density of immobilized of motors constant was evaluated in terms of the measure of directionality. The radial distance profile of χ increases in the mid-range when clustering complex density is increased from 103 to 105 motors/oocyte (Fig 6C). Either ‘weak’ diffusible dynein-like complexes (f0 = 2 pN) with a high density () or ‘strong’ motors (f0 = 7 pN) with a lower density ( motors/oocyte), both result in χ matching the experimental values in the mid-zone of the cell (10-20 μm) (Fig 6C and 6D). This result suggests that while clustering alone cannot center MTOCs in oocytes, it improves the fit to experiment.

Fig 6. Combining immobilized and clustering motors.

Simulation outputs of MTOCs (grey) motility in the presence of a combination of diffusible tetrameric minus-ended motor complexes (, f0 = 7 pN) with chromatin-centered gradient of immobilized motors ( motors/oocyte, f0 = 7 pN) at (A) t = 0 and (B) t = 20 minutes. (C) The χ values of aster movement resulting from increasing densities of weak (f0 = 2 pN) and strong (f0 = 7 pN) clustering motors ( to 105 motors/oocyte) in the presence of a gradient of immobilized motors with the same f0 values ( for f0 = 2 pN and for f0 = 7 pN). (D) The sum rank (Rs) based on the sum of square errors (ϵ) from χ distributions (grey) and % MTOCs captured in 20 minutes (black) from experiment are plotted in an ascending order, with the parameters of the density of immobilized motors () and diffusible motor complexes () plotted, assuming the f0 is constant for both.

Thus we believe our model reproduces both the qualitative and quantitative nature of the MTOC centering motility and provides novel insights into the sensitivity of this model. It demonstrates how a combination of directional cues and self-organized clustering can center small MT asters in a large cell such as an oocyte.


Meiotic spindle assembly in mammalian cells in the absence of centrosomes involves the nucleation of MTOCs in cytoplasm and their coalescence and sorting around chromosomes, resulting in bipolar spindle assembly. The nucleation of MTOCs in cytoplasm and the centripetal motility of small radial MT asters has been previously observed during the first meiotic division in mouse oocytes [3]. Similar convergence was also observed in Drosophila oocytes [60] and quantitative analysis and model calculations were used to infer that directed transport for the MTOCs was essential for the coalescence of MTOCs [61]. In Drosophila the unconventional kinesin Ncd (minus-end directed) was implicated to play a role in this inward motility [62]. In mouse oocyte MTOC coalescence, cytoplasmic dyneins or comparable minus-end directed motor have been implicated in force generation for the centripetal movement [9]. Here, we analyze experimental data from the early stages of the meiotic maturation of mouse oocytes. The experimental analysis is used to constrain a field of spatially inhomogeneous drift in a random walk. The optimized model of drift is used to model gradients of the motor dynein and MT dynamic instability. By comparing the simulation outputs with experiments, we arrive at a minimal model of a gradient of motors, essential to reproduce the experimentally observed statistics.

The experimental statistics of the MTOC motility from mouse oocytes are mostly representative of post-NEBD dynamics, allowing us make the simplifying assumption that the nuclear envelope plays no explicit role in the process. The movement of these radial MT arrays appears visually to have both an effectively diffusive and a transport component (Fig 1A). The frequency distribution of velocity from experiment is long tailed and fit to a lognormal function (S4 Fig), suggesting anomalous super-diffusive transport. While the motility had been previously described as ‘stop-and-go’ [9], we find little evidence of ‘stop’ or pause events in the motility. Our quantification of MTOC motility in cells, demonstrates the motility is qualitatively comparable to previous estimates of centrosomal aster movement observed in C. elegans fertilization [15], MTOCs in Drosophila oocyte meiosis I [61] and centrosomal asters in Xenopus meiotic extracts [5, 27]. This suggests a common theme underlying the transport of radial MT arrays in meiotic spindle assembly.

The distance travelled or displacement from the start-point plotted over time of MT arrays have been used previously [15] to distinguish between “pulling” and “pushing” modes of motility of centrosomal MT arrays during pronuclear migration. In the case of mouse meiotic MTOCs, these plots also help to distinctly separate trajectories into two sub-populations- those which show an initial rapid rise followed by capture (< 40 min), while others do not move much for a long time (> 40 min) and after this delay are captured at chromatin (Fig 2A). We further improve on the work of Kimura et al. (2005) [15] by fitting the data with a saturation model with cooperativity (Eq 11), and use it quantitatively to distinguish between pushing (n ∼ 1) and pulling (n > 1) mechanisms (Fig 2C). Every trajectory from experiment was fit to obtain a profile shape (sigmoid or parabolic) term n (S3 Fig) and comparing n from simulation and experiment shows a pushing mode of transport (n ∼ 1) close to chromatin and the cell boundary, while those in the mid-range are pulled (n > 1) (Fig 2E). The distance travelled plots from the mechanistic motor-gradient model with MT asters sorted by nucleation distance demonstrate an increase after a short delay near chromatin (dn = 0 to 10 μm) due to pulling (S5A Fig). Those in the intermediate range (dn = 10 to 20 μm) have a longer delay and then appear to be pulled (S5B Fig). Close to the cell-boundary (dn > 20 μm) they increase rapidly and then saturate, due to MT-pushing at the membrane (S5C Fig). Thus a model of a gradient of chromatin-centered motors and a rigid cortex can reproduce the qualitative differences observed in the distance-time profiles of MTOC transport. However in these experiments, the absence of clear ‘pulling’ in experiment (n > 1) near chromatin might have been missed, since the MTOC identity is lost as it nears the chromatin. While cell cortex-based pushing mechanisms have been demonstrated to generate centripetal movement [12, 50], the nature and localization of minus-end directed pulling motors in the oocyte remains to be determined. Recent evidence of from mouse oocytes during MTOC fragmentation [63] and meiotic maturation [34] suggest dynein anchored at the nuclear envelope might influence both processes. A careful study of dynein localization dynamics in this and related systems, could by used to test our model prediction.

A ‘tug-of-war’ in the transport of anti-parallel MTs moving on a surface coated with motors arises from the action of the same species of motor acting against each other, with small asymmetries in length, amplifying the velocity of transport [64]. Two-fold length asymmetries (10 to 20 μm) have been previously observed in centrosomal asters [5, 7] and simulations of such asymmetric asters on sheets of dynein motors resulted in aster transport towards chromosomes [27]. However, the mouse MTOC radius is in the range of 2 to 3 μm and no appreciable asymmetry of lengths has been reported [9]. In this work, neither homogeneous motor distributions (S1 Video), nor tetrameric motor-complexes (S2 Video), nor a dynamic instability gradient (S3 Video) result in convergence to chromatin in the ∼20 min time scale seen in experiment. Taken together, a gradient of motors is necessary in a minimal model with a mouse oocyte geometry for MTOCs to converge to the chromatin center (S4 and S5 Videos). This suggests aster motility in meiosis I of mouse oocytes differs from that in meiosis II of Xenopus oocytes. In the latter, length asymmetry can result in directional transport, however in mouse oocytes the MTOC asters are ∼4 fold shorter in MT length, resulting in smaller forces being generated. The motor numbers would then be insufficient to successfully resolve the tug-of-war in mouse oocytes by a simple ∼2-fold changes in MT length, as seen in Xenopus oocytes. In contrast, the gradient of immobilized motors result in a comparable spatial distribution of velocity for minus-ended motors with f0 = 2 pN (S6A Fig) and f0 = 7 pN (S6B Fig).

Spatial gradients of RanGTP [6, 65] are thought to direct centrosomal MT asters to chromatin during spindle assembly in meiotic extracts [57]. However the outcome of our simulations predicts that in meiotic MTOC motility, motor gradients are necessary. Such a gradient could arise from self-organized diffusion and attachment of minus-ended motors on MTs nucleated at the chromatin periphery. In addition, the motors could be immobilized on intracellular organelles, as shown in centrosomal aster centration in C. elegans [16]. It remains to be seen which of these specific mechanisms results in the the chromatin centered gradient of anchored motors. Some evidence from experiments in mouse oocytes serves to support our motor gradient model, where pre-NEBD maturing oocytes showed a high-concentration of dynein motors around the nucleus [66]. More recently, evidence of dynein localized at the nuclear periphery fragmenting MTOCs [63], suggests a validation of our model of a chromatin centered gradient of dynein-like motors. Further testing is however required to examine its dynamics.

The role of chromosomes in the centering activity of MTOCs in maturing mouse oocytes during meiotic I spindle assembly had been tested by experimentally removing the nucleus [9, 39]. The MTOCs of such oocytes have a scattered appearance and fail to assemble bipolar spindles. While chromosomes are considered essential for meiotic spindle assembly [67], we hypothesize that they also serve as the primary guidance cue of centripetal MTOC motility, in a manner comparable to other aster cell centering systems [5, 27, 36]. To test this, the spatial organization of MTOCs in enucleated oocytes was measured using published experimental data reported by Schuh and Ellenberg [9]. The image analysis of MTOCs positions from experiment (S7A and S7B Fig) resulted in a radial density distribution around the cell center (S7C Fig). This distribution is comparable to a simulation of randomly localized MTOCs, suggesting the chromatin serves as an important guidance cue for the centripetal motility of MTOCs, and in it’s absence the directional motility is lost. The molecular mechanism which converts the positional information of the chromatin into a gradient of molecular motors, still remains to be understood.

The msd profiles of MTOCs from simulations that were close to chromatin transition from super-diffusive to sub-diffusive motility (S1 Text, S8 Fig), as estimated by α, the measure of anomalous diffusion (S8F Fig). This transition results purely from changing the single dynein motor stall force from that reported for bovine brain cytoplasmic dynein (f0 = 2 pN) [48] to the yeast cytoplasmic dynein (f0 = 7 pN) [56] value. The MTOC convergence in the 2 pN stall force calculations is slow (S4 Video) as compared to when the motors had a higher stall force (7 pN) (S5 Video) at the same motor density ( motors/oocyte). Once the MTOCs reach the center of the motor gradient, they undergo effectively sub-diffusive movement, unable to generate enough force asymmetry to escape. With an additional centrosomal fluorescence label in mouse MTOC motility, the intra-nuclear motility and reorganization of MTOCs could be studied in future. This will also help better understand the subsequent bipolar spindle formation and its connection with chromosome biorientation in meiosis I of mouse oocytes [68, 69].

The sensitivity analysis of the gradient model demonstrates that MT number per aster does not affect velocity and directionality of the asters. On the other hand the model is sensitive to motor density. The motor density in 2D area-density ranging between and 104 motors/oocyte corresponds to a physical density of ≈ 0.2 to 2 motors/μm2 for an oocyte of radius 40 μm. The addition of motor complexes, which cross-link MTs and walk to the minus-ends of the respective MTs, also change the dynamics of MTOC transport. At high densities of motor complexes, the asters coalesce to a few (∼10) clusters and centripetal convergence results. Yet the directionality profiles are qualitatively different from the experimental measures (Fig 6C). While the densities of both immobilized and diffusible motors tested are mean area densities, over-expression of dynein motor proteins could serve as an experimental test of our model predictions.

A limitation of the models described here is that both the phenomenological and mechanistic models assume a 2D circular geometry, while the mouse oocyte is a 3D sphere. So asters finding the cell center in 3D is expected to take longer due to dimensionality in biological search problems [70], and a further parameter optimization would be required. Our effort here serves to reduce the search for ‘scenarios’, i.e. combinations of mechanisms such as motors, MT-dynamic instability, gradients and clustering motors, by optimizing simulations to experimental data. In future, a full 3D model would then only require parameter optimization to a 3D experimental dataset. At the other extreme, a 1D model could have further simplified the geometry based on the radial-symmetry of the system, as has been assumed in the ‘slide and cluster’ model of linear MT filaments in spindle assembly [71]. However this would ignore the orthogonal interactions between MTs of multiple asters, which are only possible in an explicit 2D geometry. Thus our choice of spatial dimensions is driven by an attempt to capture the important qualitative behavior of the system, while keeping the model simple enough for clarity and calculation speed. While a 3D simulations of cellular processes are more ‘complete’, it has been suggested the choice of spatial dimensions should simplify the system to sufficiently capture the spatial dynamics [35, 72]. A further limitation of both the phenomenological RWD and MT-motor model is the availability of only one time-series dataset. In future, additional experiments with mouse oocytes could help test the model predictions. While this model has been developed to test the generality of mechanisms on the mouse MTOC motility, it would be useful in future to explore the relevance of this model to other aster-centering systems such as in C. elegans [15], Xenopus [27], Drosophila [73] and sea urchin [74]. Additional mechanisms such as a contractile actin network has been shown to drive spindle assembly in meiosis I of starfish oocytes [18], but are ignored in this model since in experiments, it does not affect the process [9]. Additionally the potential role of MT-dependent MT nucleation [75] remains to be explored as a self-organized mechanism. Testing alternative cellular geometries and additional mechanisms could in future result in a more complete exploration of MT aster centripetal transport and the physical constraints. This in turn might help us better understand the physical basis of the evolutionary diversity of aster-centering mechanisms.

The models of of MTOC centripetal motility explored in this study, provide insights into several aspects of the early stages of self-organized spindle assembly. For instance, the RWD model demonstrates that for a cell of diameter ≈ 80 μm, a simple random-walk strategy of MTOC particles ‘search-and-capture’ at the chromosomes is insufficient within the time-scale of spindle assembly in meiosis (20-30 min) [9], and a long-range bias in motility is essential. The mechanistic model demonstrates that a bias of motors is minimally capable of reproducing the dynamics. MT mass increase which could arise due to increasing MT lengths (stabilization) [5, 6] or number (nucleation) [75], both appear to be insufficient to affect the dynamics of motility. We also find, dynein-like clustering motor complexes, which diffuse and cross-link MTs, at a high density result in an aggregation of MTOC asters to the cell interior. Such a self-organized mechanism however is inefficient in resulting in MTOC capture percentages comparable to experimental values (Table 3) in comparable time-scales (≈ 20 min). Additionally MT density per aster does not affect MTOC centripetal motion but the density of immobilized motors () localized in a gradient does change the dynamics. Such parameters are likely to be adjusted by cells, depending on the specific geometry and time-constraints. The results of this study could be used to predict the nature of MTOC centripetal transport, when the size ratios of asters to cell sizes are also comparable to the mouse oocyte. A more complete picture of the evolutionary constraints on mechanisms driving radial MT arrays to find the center of a cell will however require further quantitative studies from acentrosomal spindle assembly from more organisms, as well as calculations that explore a greater parameter space.

The model presented here predicts the functional form of a drift field in agreement with experimental data of MTOC motility. A mechanistic model of the gradient with immobilized minus-ended motors minimally reproduces experimental dynamics and allows us to test the effect of single molecule characteristics of motors on collective transport statistics. A hybrid model with a gradient of immobilized motors and diffusible clustering dynein-like complexes, combined with cortical pushing (Fig 7), satisfies all experimental measures available. Measuring the localization, density and mobility of dyneins in the mouse oocyte during meiosis I, would be a useful test of the model predictions. While the model is fit to spindle assembly during meiosis I in mouse oocytes, it also predicts the design constraints in terms of MT lengths and the localization, mobility and density of molecular motors when MT radial arrays are required to search space and undergo capture at the cell center.

Fig 7. Mechanism of MT centering.

An overview of our model of the centering motility of MTOCs (red) in a mouse-oocyte geometry. Net forces (solid arrows) arise from: inward inward pushing due to MT bending at the cell boundary, inward pulling due to a gradient of immobilized motors around the chromatin space (green) and clustering by uniformly distributed diffusible clustering motors (purple). The dotted arrows indicate the process of clustering.

Supporting Information

S1 Fig. Msd of MTOCs measured in experiment.

(A) The msd (μm2) (blue line) as a function of time is calculated (based on Eq 6) for all available MTOC trajectories from Schuh & Ellenberg [9] and fit to an effective diffusion and drift velocity model (Eq 7). The frequency distribution of the fit parameters (B) effective diffusion coefficient (Deff) (mean 0.006 ± s.d. 0.006 μm2/s) and (C) drift velocity (veff) (mean 0.008 ± s.d. 0.005 μm/s) are plotted.


S2 Fig. Optimizing gradient parameters.

(A) All those parameter sets (k) which fell within the top 15% of the sum of scores ranking are plotted with the component rank for capture time (Rt(k)) (grey) and directionality (Rχ(k)) (blue). The parameter sets (k) of the top-ten ranks are listed in S1 Table with the values of r1/2 and s for ϕa and ϕr. For a representative subset of the optimization scheme, the error (ϵ) in (B) χ and (C) tc were evaluated keeping the attractive gradient constant ( μm and sa = 1) and varying the repulsive gradient parameters (y-axis) and (x-axis). The colorbar indicates the value of ϵ.


S3 Fig. Fits to distance travelled by MTOC from experiment.

The distance travelled of experimentally measured MTOCs were plotted as a function of time in minutes. The plots are sorted based on increasing distance of nucleation (dn) from chromatin. Each profile was fit to the effective model (Eq 11) to obtain a ‘cooperativity parameter’ (n).


S4 Fig. MTOC velocity distribution.

The experimentally measured frequency distribution of instantaneous velocity (based on XY-trajectories taken from Schuh & Ellenberg [9] and re-analyzed) is fit to a lognormal function. The parameters are the mean μ = 8.8 ⋅ 10−3 μm/s and variance v = 4.57 ⋅ 10−5.


S5 Fig. Distance travelled in a motor gradient.

MT-motor simulations in presence of a motor gradient (f0 = 2 pN, motors/oocyte) were used to plot the distance travelled by the MTOCs (z-axis) as a function of time in minutes (x-axis) and nucleation position (y-axis). The plots represent the subset of MTOCs nucleated (A) close to chromatin (0-10 μm), (B) in the mid-cell region (10-20 μm) and (C) near the cell boundary (20-30 μm).


S6 Fig. Spatial velocity distribution.

The mean velocities in μm/s (y-axis) radially binned as a function of distance from the cell center in μm (x-axis) calculated from the MT-motor model in an immobilized motor gradient with motor stall forces and densities: (A) f0 = 2 pN, motors/oocyte and (B) f0 = 7 pN and motors/oocyte.


S7 Fig. Enucleation and MTOC distributions.

(A) Previous data of mouse oocyte enucleation prior to NEBD by Schuh & Ellenberg [9] was used to automatically detect MTOCs (yellow outlines) and their centroids (red asterisk). Scale bar = 10 μm. (B) The 2D coordinates of these experimental MTOC positions were used to (C) compare the radial density distribution of experimentally measured MTOCs (red) with simulated MTOCs (black) that were localized randomly with a uniform density.


S8 Fig. Msd as a function of nucleation distance from experiment and simulation.

Msd profiles were calculated for the experimentally measured MTOC trajectories and sorted by their nucleation distance (dn) where (A) dn ≤ 10 μm, (B) 10 < dn ≤ 20 μm and (C) 20 < dn ≤ 30 μm. (D) The Deff and (F) α values obtained from fits to simulated msd trajectories are plotted as a function of dn. Experimental profiles (black line) are compared to multiple scenarios in simulation (800 trajectories per scenario) with different stall forces (f0) and motors per cell (). The values are mean ± s.d. The error between simulation and experiment, ϵ (colorbar) is plotted for (E) D′ and (G) α as a function of stall force (f0) and motor density ().


S9 Fig. Spatio-temporal trends in apparent diffusion coefficient and anomaly parameter from experiment.

The apparent diffusion coefficient (D′) and the measure of anomalous diffusion (α) were obtained from fitting the anomalous diffusion model (Eq 8) to experimental msd profiles. (A) D′ and α are plotted as a function of nucleation distance (x-axis) and (B) time duration of the trajectory (x-axis).


S1 Video. MTOC motility in the absence of a gradient.

80 MTOCs (grey) in the oocyte are pushed inwards by the cell boundary (outer blue circle) with immobilized minus-end directed motors (green dots) with f0 = 7 pN resulting in random MTOC motility. No gradient originates from the chromatin (inner blue circle).


S2 Video. MTOC motility in the presence of diffusible minus-ended motor complexes.

80 MTOCs (grey) were simulated in cytoplasmic space of the 2D oocyte geometry marked by the outer cell boundary (outer blue circle) and inner chromatin region (blue circle) in the presence of minus-end directed motor complexes (purple dots) initialized in the cytoplasm with density motors/oocyte. These diffusible motors with stall force f0 = 7 pN, can cross-link MTs and result in clustering by walking towards the minus-ends of neighboring asters that they crosslink.


S3 Video. MTOC motility in a gradient of MT dynamic instability.

80 MTOCs (grey) were simulated in the 2D oocyte geometry with the outer cell boundary (outer blue circle) and uniformly distributed surface immobilized motors with f0 = 7 pN. The fcat and fres parameters were distributed in a sigmoid gradient (Fig 3G) originating from the center of the chromatin region (inner blue circle).


S4 Video. MTOC motility in a gradient of weak motors.

80 MTOCs (grey) were simulated in the 2D oocyte geometry with the outer cell boundary (outer blue circle) and surface immobilized motors with f0 = 2 pN distributed in a sigmoid gradient (Fig 3J) originating from the center of the chromatin region (inner blue circle), and homogeneous dynamic instability.


S5 Video. MTOC motility in a gradient of strong motors.

80 MTOCs (grey) were simulated in the 2D oocyte geometry with the outer cell boundary (outer blue circle) and surface immobilized motors with f0 = 7 pN, distributed in a sigmoid gradient (Fig 3J) originating from the center of the chromatin region (inner blue circle).


S6 Video. MTOC motility in a gradient of immobilized motors and diffusible motor-complexes.

80 MTOCs (grey) were simulated in the 2D oocyte geometry with the outer cell boundary (outer blue circle) and motors which are immobilized at a density of motors/oocyte (green dots) in a sigmoid gradient originating from the center of the chromatin region (inner blue circle). The diffusible minus-end directed motor-complexes with motors/oocyte (purple dots) bind to 2 MTs and walk simultaneously on them, generating a clustering force on the MTOC asters. For both kinds of motors f0 = 7 pN.


S1 Table. Optimized RWD gradient parameters.

The top ten sum ranks are listed in ascending order, based on the ranks from the directionality and capture time error (ϵ(k)), with the corresponding parameters of the attractive ( and sa) and repulsive ( and sr) gradients (see S2A Fig).


S1 Text. Msd analysis and anomalous diffusion.



We are grateful to Melina Schuh for sharing the experimental data of mouse oocyte spindle assembly.

Author Contributions

  1. Performed the experiments: NK.
  2. Analyzed the data: NK.
  3. Contributed reagents/materials/analysis tools: NK CAA.
  4. Wrote the paper: CAA.
  5. Conceived and designed the model: CAA. Designed the software in simulation: NK CAA. Designed the analysis software: NK CAA. Developed the model for mechanistic simulations: NK. Co-developer of Cytosim: CAA.


  1. 1. Donahue RP. Maturation of the mouse oocyte in vitro. I. Sequence and timing of nuclear progression. J Exp Zool. 1968 Oct;169(2):237–249. pmid:5750655
  2. 2. Szollosi D, Calarco P, Donahue RP. Absence of centrioles in the first and second meiotic spindles of mouse oocytes. J Cell Sci. 1972 Sep;11(2):521–541. pmid:5076360
  3. 3. Messinger SM, Albertini DF. Centrosome and microtubule dynamics during meiotic progression in the mouse oocyte. J Cell Sci. 1986;100(2):289–298.
  4. 4. Karsenti E, Newport J, Hubble R, Kirschner M. Interconversion of Metaphase and Interphase Microtubule Arrays, as Studied by the Injection of Centrosomes and Nuclei into Xenopus Eggs. J Cell Biol. 1984;98(5):1730–1745. pmid:6725396
  5. 5. Carazo-Salas RE, Karsenti E. Long-Range Communication between Chromatin and Microtubules in Xenopus Egg Extracts. Curr Biol. 2003;13:1728–1733. pmid:14521840
  6. 6. Caudron M, Bunt G, Bastiaens P, Karsenti E. Spatial coordination of spindle assembly by chromosome-mediated signaling gradients. Science. 2005;309:1373–1376. pmid:16123300
  7. 7. Athale CA, Dinarina A, Mora-Coral M, Pugieux C, Nedelec F, Karsenti E. Regulation of microtubule dynamics by reaction cascades around chromosomes. Science. 2008;322:1243–1247. pmid:18948504
  8. 8. Dumont J, Petri S, Pellegrin F, Terret ME, Bohnsack MT, Rassinier P, et al. A centriole- and RanGTP-independent spindle assembly pathway in meiosis I of vertebrate oocytes. J Cell Biol. 2007 Jan;176(3):295–305. pmid:17261848
  9. 9. Schuh M, Ellenberg J. Self-organization of MTOCs replaces centrosome function during acentrosomal spindle assembly in live mouse oocytes. Cell. 2007;130:484–498. pmid:17693257
  10. 10. Kalab P, Heald R. The RanGTP gradient—a GPS for the mitotic spindle. J Cell Sci. 2008 May;121(Pt 10):1577–1586. pmid:18469014
  11. 11. Holy TE, Dogterom M, Yurke B, Leibler S. Assembly and positioning of microtubule asters in microfabricated chambers. Proc Natl Acad Sci USA. 1997 Jun;94(12):6228–6231. pmid:9177199
  12. 12. Faivre-Moskalenko C, Dogterom M. Dynamics of microtubule asters in microfabricated chambers: the role of catastrophes. Proc Nat Acad Sci USA. 2002 Dec;99(26):16788–16793. pmid:12486218
  13. 13. Grill SW, Howard J, Schäffer E, Stelzer EHK, Hyman Aa. The distribution of active force generators controls mitotic spindle position. Science (New York, NY). 2003 Jul;301(5632):518–21.
  14. 14. Kozlowski C, Srayko M, Nedelec F. Cortical Microtubule Contacts Position the Spindle in C. elegans Embryos. Cell. 2007;129(3):499–510. pmid:17482544
  15. 15. Kimura A, Onami S. Computer simulations and image processing reveal length-dependent pulling force as the primary mechanism for C. elegans male pronuclear migration. Dev Cell. 2005;8:765–775. pmid:15866166
  16. 16. Kimura K, Kimura A. Intracellular organelles mediate cytoplasmic pulling force for centrosome centration in the Caenorhabditis elegans early embryo. Proc Nat Acad Sci, USA. 2010;108:137–142.
  17. 17. Longoria Ra, Shubeita GT. Cargo transport by cytoplasmic Dynein can center embryonic centrosomes. PloS One. 2013 Jan;8(7):e67710. pmid:23840877
  18. 18. Lénárt P, Bacher CP, Daigle N, Hand AR, Eils R, Terasaki M, et al. A contractile nuclear actin network drives chromosome congression in oocytes. Nature. 2005;436(7052):812–818. pmid:16015286
  19. 19. Mitchison T, Wühr M, Nguyen P, Ishihara K, Groen A, Field CM. Growth, interaction, and positioning of microtubule asters in extremely large vertebrate embryo cells. Cytoskeleton (Hoboken, NJ). 2012 Oct;69(10):738–50.
  20. 20. Nedelec FJ, Surrey T, Maggs AC, Leibler S. Self-organization of microtubules and motors. Nature. 1997 Sep;389(6648):305–308. pmid:9305848
  21. 21. Surrey T, Nedelec F, Leibler S, Karsenti E. Physical properties determining self-organization of motors and microtubules. Science. 2001 May;292(5519):1167–1171. pmid:11349149
  22. 22. Nedelec F, Surrey T, Maggs AC. Dynamic concentration of motors in microtubule arrays. Phys Rev Lett. 2001 apr;86:3192–3195. pmid:11290140
  23. 23. Nedelec F. Computer simulations reveal motor properties generating stable antiparallel microtubule interactions. J Cell Biol. 2002 Sep;158(6):1005–1015. pmid:12235120
  24. 24. Goshima G, Nedelec F, Vale RD. Mechanisms for focusing mitotic spindle poles by minus end-directed motor proteins. J Cell Biol. 2005 Oct;171:229–240. pmid:16247025
  25. 25. Channels WE, Nedelec FJ, Zheng Y, Iglesias PA. {S}patial regulation improves antiparallel microtubule overlap during mitotic spindle assembly. Biophys J. 2008 Apr;94(7):2598–2609. pmid:18096631
  26. 26. Loughlin R, Heald R, Nédélec F. A computational model predicts Xenopus meiotic spindle organization. J Cell Biol. 2010 Dec;191(7):1239–49. pmid:21173114
  27. 27. Athale CA, Dinarina A, Nedelec F, Karsenti E. Collective behavior of minus-ended motors in mitotic microtubule asters gliding toward DNA. Phys Biol. 2014 Feb;11(1):016008. pmid:24476749
  28. 28. Reinsch S, Gonczy P. Mechanisms of nuclear positioning. J Cell Sci. 1998 aug;111 (Pt 1:2283–2295.
  29. 29. Wühr M, Dumont S, Groen AC, Needleman DJ, Mitchison TJ. How does a millimeter-sized cell find its center? Cell Cycle. 2009 Apr;8(8):1115–1121.
  30. 30. Hamaguchi MS, Hiramoto Y. Analysis of the Role of Astral Rays in Pronuclear Migration in Sand Dollar Eggs by the Colcemid-UV Method. Devel Growth and Differ. 1986;28(2):143–156.
  31. 31. Kimura A, Onami S. Local cortical pulling-force repression switches centrosomal centration and posterior displacement in C. elegans. J Cell Biol. 2007 dec;179(7):1347–1354. pmid:18158330.
  32. 32. Théry M, Racine V, Piel M, Pépin A, Dimitrov A, Chen Y, et al. Anisotropy of cell adhesive microenvironment governs cell internal organization and orientation of polarity. PNAS. 2006;103(52):19771–19776. pmid:17179050
  33. 33. Calarco PG, Donahue RP, Szollosi D. Germinal vescicle breakdown in the mouse oocyte. J Cell Sci. 1972;10(2):369–385. pmid:5018030
  34. 34. Luksza M, Queguigner I, Verlhac MH, Brunet S. Rebuilding MTOCs upon centriole loss during mouse oogenesis. Developmental Biology. 2013;382(1):48–56. pmid:23954884
  35. 35. Mogilner A, Odde DJ. Modeling Cellular Processes in 3-D. Trends in Cell Biology. 2011;21(12):692–700. pmid:22036197
  36. 36. Wollman R, Cytrynbaum EN, Jones JT, Meyer T, Scholey JM, Mogilner A. Efficient chromosome capture requires a bias in the ‘search-and-capture’ process during mitotic-spindle assembly. Curr Biol. 2005 May;15(9):828–832. pmid:15886100
  37. 37. Heald R, Khodjakov A. Thirty years of search and capture: The complex simplicity of mitotic spindle assembly. J Cell Biol. 2015 Dec;211(6):1103–1111. pmid:26668328
  38. 38. Tsaneva-Atanasova K, Burgo A, Galli T, Holcman D. Quantifying Neurite Growth Mediated by Interactions among Secretory Vesicles, Microtubules, and Actin Networks. Biophysical Journal. 2009 Feb;96:840–857. pmid:19186125
  39. 39. Yang JW, Lei ZL, Miao YL, Huang JC, Shi LH, OuYang YC, et al. Spindle assembly in the absence of chromosomes in mouse oocytes. Reproduction. 2007 Dec;134(6):731–738. pmid:18042630
  40. 40. Fisher NI. Statistical Analysis of Circular Data. Statistical Analysis of Circular Data. Cambridge University Press; 1995.
  41. 41. Nedelec F, Foethke D. Collective Langevin dynamics of flexible cytoskeletal fibers. New Jour Phys. 2007 Nov;9.
  42. 42. Foethke D, Makushok T, Brunner D, Nedelec F. Force- and length-dependent catastrophe activities explain interphase microtubule organization in fission yeast. Mol Syst Biol. 2009;5:241. pmid:19293826
  43. 43. Rupp B, Nédélec F. Patterns of molecular motors that guide and sort filaments. Lab on a chip. 2012 nov;12(22):4903–4910. pmid:23038219
  44. 44. Verde F, Dogterom M, Stelzer E, Karsenti E, Leibler S. Control of microtubule dynamics and length by cyclin A- and cyclin B-dependent kinases in Xenopus egg extracts. J Cell Biol. 1992 Sep;118(5):1097–1108. pmid:1387400
  45. 45. Dogterom M, Leibler S. Physical Aspects of the Growth and Regulation of Microtubule Structures. Phys Rev Lett. 1993;70(9):1347–1350. pmid:10054353
  46. 46. Rusan NM, Tulu US, Fagerstrom C, Wadsworth P. Reorganization of the microtubule array in prophase/prometaphase requires cytoplasmic dynein-dependent microtubule transport. J Cell Biol. 2002 Sep;158(6):997–1003. pmid:12235119
  47. 47. Kramers H. Brownian motion in a field of force and the diffusion model of chemical reactions. Physica. 1940 apr;7(4):284–304.
  48. 48. Mallik R, Carter BC, Lex SA, King SJ, Gross SP. Cytoplasmic dynein functions as a gear in response to load. Nature. 2004 Feb;427:649–652. pmid:14961123
  49. 49. Kunwar A, Mogilner A. Robust transport by multiple motors with nonlinear force-velocity relations and stochastic load sharing. Physical biology. 2010 jan;7(1):16012. pmid:20147778
  50. 50. Laan L, Pavin N, Husson J, Romet-Lemonne G, van Duijn M, López MP, et al. Cortical Dynein Controls Microtubule Dynamics to Generate Pulling Forces that Position Microtubule Asters. Cell. 2012 feb;148(3):502–14. pmid:22304918
  51. 51. Valentine MT, Perlman ZE, Mitchison TJ, Weitz DA. Mechanical properties of Xenopus egg cytoplasmic extracts. Biophys J. 2005;88:680–689. pmid:15501931
  52. 52. Gittes F, Mickey B, Nettleton J, Howard J. Flexural Rigidity of Microtubules and Actin Filaments Measured from Thermal Fluctuations in Shape. J Cell Biol. 1993;120(4):923–934. pmid:8432732
  53. 53. Oiwa K, Sakakibara H. Recent progress in dynein structure and mechanism. Curr Opin Cell Biol. 2005 Mar;17(1):98–103. pmid:15661525
  54. 54. Howard J. Mechanics of Motor Proteins and the Cytoskeleton. Sunderland: Sinauer Associates; 2001.
  55. 55. Reck-Peterson SL, Yildiz A, Carter AP, Gennerich A, Zhang N, Vale RD. Single-molecule analysis of dynein processivity and stepping behavior. Cell. 2006 July;126:335–348. pmid:16873064
  56. 56. Gennerich A, Carter AP, Reck-Peterson SL, Vale RD. Force-Induced Bidirectional Stepping of Cytoplasmic Dynein. Cell. 2007;131(2006):952–965. pmid:18045537
  57. 57. Blehm BH, Schroer TA, Trybus KM, Chemla YR, Selvin PR. In vivo optical trapping indicates kinesin’s stall force is reduced by dynein during intracellular transport. Proc Natl Acad Sci USA. 2013 Feb;110(9):3381–3386. pmid:23404705
  58. 58. Qian H, Sheetz MP, Elson EL. Single particle tracking. Analysis of diffusion and flow in two-dimensional systems. Biophys J. 1991;60:910–921.
  59. 59. Michalet X. Mean square displacement analysis of single-particle trajectories with localization error: Brownian motion in an isotropic medium. Phys Rev E. 2010;82:041914.
  60. 60. Matthies HJ, McDonald HB, Goldstein LS, Theurkauf WE. Anastral meiotic spindle morphogenesis: role of the non-claret disjunctional kinesin-like protein. J Cell Biol. 1996 Jul;134(2):455–464. pmid:8707829
  61. 61. Hallen MA, Endow SA. Anastral spindle assembly: a mathematical model. Biophysical Journal. 2009 Oct;97(8):2191–201. pmid:19843451
  62. 62. Sköld HN, Komma DJ, Endow SA. Assembly pathway of the anastral Drosophila oocyte meiosis I spindle. J of Cell Sci. 2005;118:1745–1755.
  63. 63. Clift D, Schuh M. A three-step MTOC fragmentation mechanism facilitates bipolar spindle assembly in mouse oocytes. Nature Communications. 2015;6:7217. pmid:26147444
  64. 64. Leduc C, Pavin N, Julicher F, Diez S. Collective Behavior of Antagonistically Acting Kinesin-1 Motors. Phys Rev Lett. 2010;105(128103):1–4.
  65. 65. Kaláb P, Pralle A, Isacoff EY, Heald R, Weis K. Analysis of a RanGTP-regulated gradient in mitotic somatic cells. Nature. 2006;440:697–701. pmid:16572176
  66. 66. Zhang D, Yin S, Jiang MX, Ma W, Hou Y, Liang CG, et al. Cytoplasmic dynein participates in meiotic checkpoint inactivation in mouse oocytes by transporting cytoplasmic mitotic arrest-deficient (Mad) proteins from kinetochores to spindle poles. Reproduction. 2007 Apr;133(4):685–695. pmid:17504913
  67. 67. McKim KS, Hawley RS. Chromosomal control of meiotic cell division. Science. 1995 Dec;270(5242):1595–1601. pmid:7502068
  68. 68. Kitajima TS, Ohsugi M, Ellenberg J. Complete kinetochore tracking reveals error-prone homologous chromosome biorientation in mammalian oocytes. Cell. 2011 Aug;146(4):568–581. pmid:21854982
  69. 69. Yoshida S, Kaido M, Kitajima TS. Inherent Instability of Correct Kinetochore-Microtubule Attachments during Meiosis I in Oocytes. Dev Cell. 2015 Jun;33(5):589–602. pmid:26028219
  70. 70. Adam G, Delbruck M. Reduction of dimensionality in biological diffusion processes. In: Rich A, Davidson N, editors. Structural Chemistry and Molecular Biology. San Francisco, NC, USA,: W.H. Freeman & Company; 1968. p. 198–215.
  71. 71. Burbank KS, Mitchison TJ, Fisher DS. Slide-and-cluster models for spindle assembly. Curr Biol. 2007;17:1373–1383. pmid:17702580
  72. 72. Umulis DM, Othmer HG. The importance of geometry in mathematical models of developing systems. Curr Opin Genet Dev. 2012;22(6):547–552. pmid:23107453
  73. 73. Gergely F, Basto R. Multiple centrosomes: together they stand, divided they fall. Genes & Dev. 2008 Sep;22(17):2291–2296.
  74. 74. Tanimoto H, Kimura A, Minc N. Shape-motion relationships of centering microtubule asters. The Journal of Cell Biology. 2016;212(7):777–787. pmid:27022090
  75. 75. Petry S, Groen AC, Ishihara K, Mitchison TJ, Vale RD. Branching microtubule nucleation in Xenopus egg extracts mediated by augmin and TPX2. Cell. 2013 Feb;152(4):768–777. pmid:23415226