Dakosaurus and Plesiosuchus are characteristic genera of aquatic, large-bodied, macrophagous metriorhynchid crocodylomorphs. Recent studies show that these genera were apex predators in marine ecosystems during the latter part of the Late Jurassic, with robust skulls and strong bite forces optimized for feeding on large prey.
Here we present comprehensive osteological descriptions and systematic revisions of the type species of both genera, and in doing so we resurrect the genus Plesiosuchus for the species Dakosaurus manselii. Both species are diagnosed with numerous autapomorphies. Dakosaurus maximus has premaxillary ‘lateral plates’; strongly ornamented maxillae; macroziphodont dentition; tightly fitting tooth-to-tooth occlusion; and extensive macrowear on the mesial and distal margins. Plesiosuchus manselii is distinct in having: non-amblygnathous rostrum; long mandibular symphysis; microziphodont teeth; tooth-crown apices that lack spalled surfaces or breaks; and no evidence for occlusal wear facets. Our phylogenetic analysis finds Dakosaurus maximus to be the sister taxon of the South American Dakosaurus andiniensis, and Plesiosuchus manselii in a polytomy at the base of Geosaurini (the subclade of macrophagous metriorhynchids that includes Dakosaurus, Geosaurus and Torvoneustes).
The sympatry of Dakosaurus and Plesiosuchus is curiously similar to North Atlantic killer whales, which have one larger ‘type’ that lacks tooth-crown breakage being sympatric with a smaller ‘type’ that has extensive crown breakage. Assuming this morphofunctional complex is indicative of diet, then Plesiosuchus would be a specialist feeding on other marine reptiles while Dakosaurus would be a generalist and possible suction-feeder. This hypothesis is supported by Plesiosuchus manselii having a very large optimum gape (gape at which multiple teeth come into contact with a prey-item), while Dakosaurus maximus possesses craniomandibular characteristics observed in extant suction-feeding odontocetes: shortened tooth-row, amblygnathous rostrum and a very short mandibular symphysis. We hypothesise that trophic specialisation enabled these two large-bodied species to coexist in the same ecosystem.
Citation: Young MT, Brusatte SL, de Andrade MB, Desojo JB, Beatty BL, Steel L, et al. (2012) The Cranial Osteology and Feeding Ecology of the Metriorhynchid Crocodylomorph Genera Dakosaurus and Plesiosuchus from the Late Jurassic of Europe. PLoS ONE 7(9): e44985. doi:10.1371/journal.pone.0044985
Editor: Richard J. Butler, Ludwig-Maximilians-Universität München, Germany
Received: April 24, 2012; Accepted: August 16, 2012; Published: September 18, 2012
Copyright: © Young et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Funding: The authors have no support or funding to report.
Competing interests: The authors have declared that no competing interests exist.
The evolution and diversification of metriorhynchid crocodylomorphs in the Mesozoic seas is a classic example of an evolutionary radiation in the fossil record , . Metriorhynchids are highly aberrant compared to other crocodylomorphs (which are terrestrial or semi-aquatic), and evolved numerous adaptations to their pelagic lifestyle, including a complete loss of their osteoderm armour, hydrofoil-like forelimbs, a hypocercal tail, sclerotic ossicles and large salt glands , –. A flurry of recent morphological, systematic, and phylogenetic work on metriorhynchids is helping to understand their evolutionary radiation in great detail. Phylogenetic analyses robustly show that metriorhynchids are divided into two major subclades, Metriorhynchinae and Geosaurinae , , –. Functional and macroevolutionary studies indicate that these two subgroups were well suited for feeding on different prey and developed a great variety of body sizes, skull shapes, biting behaviours, and dental morphologies during their evolutionary history , , , –.
One of the major metriorhynchid subclades, Geosaurinae, includes large-bodied taxa such as “Mr Leeds’ specimen” (GLAHM V972, the generic and specific name for this taxon is currently in press ), Torvoneustes, Geosaurus, and Dakosaurus, which had skulls and teeth well suited for feeding on large prey , , , , , . There seems to have been a temporal and phylogenetic trend towards increasing super-predatory behaviour within this group, as progressively more derived and younger taxa had skulls that were better optimized for enduring strong bite forces , , . Furthermore, because of the high diversity of tooth crown and serration morphologies among geosaurines , Young et al.  hypothesised that contemporaneous geosaurines were limiting competition through ecological specialisation and niche partitioning. Indeed, Late Jurassic marine ecosystems frequently had two sympatric geosaurine genera that were either apex-predators or second tier super-predators , , .
The geosaurine genus Dakosaurus has been of particular interest, especially due to its unusual cranial morphology. Its skull and mandible were the most robust and powerful within Metriorhynchidae, as shown by biomechanical analyses , . Furthermore, it had a brevirostrine and oreinirostral snout and a robust dentition, with the largest apicobasal crown lengths of any metriorhynchid and serrated carinae composed of a keel and true denticles , , , ,  (Fig. 1). As has been hinted at in previous studies, and as we argue more fully in this monograph, it is likely that Dakosaurus was macrophagous: an animal that could feed upon prey items of similar body size. The larger body size of Dakosaurus compared to other metriorhynchids would be beneficial for such a feeding style, as it would allow this taxon to target larger prey, and would allow for a reduction in the time taken to process prey, making larger organisms more energetically feasible prey items .
Skull and mandible in, (A) lateral (right) view of the snout and (B) close-up on the posterior teeth, showing the interlocking dentition. Note the robust teeth and snout. Abbreviations: max, maxilla; mnf, maxillary neurovascular foramen; na, nasal; orb, orbit; pof, preorbital fenestra; prf, prefrontal.
The genus Dakosaurus has been known for over 150 years, and it was among the handful of large marine reptiles discovered in early–mid 19th century Europe that helped reveal a hitherto unknown ancient fauna of peculiar, predatory reptiles from the Mesozoic. Since that time numerous new species have been placed in the genus. The recent phylogenetic analysis of Young & Andrade  and the taxonomic changes necessitated by that analysis indicated that the genus Dakosaurus had four valid species –: D. andiniensis (Fig. 1), D. maximus  (Figs. 2, 3, 4, 5, 6, 7, 8), D. manselii  (Figs. 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23) and D. nicaeensis . Furthermore, two species originally assigned to Dakosaurus were referred by Young & Andrade  to the genus Geosaurus: D. lapparenti and D. carpenteri. However, the latter was recently given its own genus, Torvoneustes . Most of the Callovian–Oxfordian teeth from England, France and Poland that previously were referred to Dakosaurus are now considered as belonging to a new genus (still in press ), whereas another intriguing specimen, NHMUK PV R486, is considered Geosaurinae indeterminate . Furthermore, incomplete material from the Kimmeridgian of Mexico may represent a fifth species of Dakosaurus ,  but this is currently unclear (see discussion below). As is clear, Dakosaurus had a wide geographic range, with specimens known from Argentina, England, France, Germany and Switzerland , and possibly also Spain . It may have had a worldwide distribution during the Mesozoic.
(A) General view of the skull and mandible, (B) close-up on the dentary alveoli and raised lateral and medial margins, and (C) oblique forward view of the dentary tooth row. Abbreviations: den, dentary; dlp, dentary lateral plate; dmp, dentary medial plate; max, maxilla; na, nasal; pre, premaxilla; prf, prefrontal; tc, tooth crowns.
(A) Anterior view of the skull and mandible, note that level to the fourth dentary tooth the mandibular ramus deflects laterally (i.e. short symphysis), and (B) oblique dorsal view of the skull, emphasising the blunt “bullet-shaped” snout (i.e. amblygnathy). Abbreviations: den, dentary; max, maxilla; na, nasal; pre, premaxilla; prf, prefrontal.
(A) Close-up on the premaxillary ‘lateral plates’, (B) close-up on the maxillary alveoli in oblique ventral view and (C) close-up on the maxillary teeth showing tooth crown wear. Abbreviations: plp, premaxillary lateral plate; rp, reception pit.
Snout (SMNS 10819a) in: (A) dorsal view, (B) ventral (palatal) view, and (C) close-up on the maxillary tooth-row in ventral view. Note that several teeth exhibit carinal wear, broken apices and spalling of the enamel at the apex. (D) Left-half of the posterior region of the skull (SMNS 10819b) in dorsal view. Abbreviations: en, external nares; fr, frontal; max, maxilla; pa, parietal; po, postorbital; pre, premaxilla; prf, prefrontal; rp, reception pit; sq, squamosal; stf, supratemporal fenetra.
Left mandibular ramus in lithographic limestone in: (A) general view, (B) close-up on the anterior teeth, and (C) close-up on the dentary dorsal margin at the first preserved tooth crown, showing the various foramina and a reception pit and (D) close-up on the dentary dorsal margin, slightly further back along the tooth row. Abbreviations: an, angular; art, articular; cp, coronoid process on the surangular; den, dentary; rp, reception pit; sdg, surangulodentary groove; sur, surangular.
Left isolated maxilla in: (A) lateral view, (B) dorsal view and (C) ventral view (showing the tooth row). Abbreviations: al, alveolus; mnf, maxillary neurovascular foramen; pof, preorbital fenestra; tc, tooth crown.
Numerous isolated teeth of D. maximus showing the occlusion wear patterns and apical breakage. Top left scale bar for (A), top right scale bar for (B), and bottom scale bar for images (C)–(D). Abbreviations: bf, basal facet; btc, broken tip; cw, carinal wear.
Dorsal view of the skull, (A) hypothetical skull reconstruction (grey lines represent elements that are missing) and (B) photograph of what is preserved. Abbreviations: en, external nares; max, maxilla; na, nasal; orb, orbit; pa, parietal; pre, premaxilla; prf, prefrontal; sq, squamosal; stf, supratemporal fenestra.
Snout in dorsal view, (A) line drawing (grey squares represent the premaxilla-maxilla suture, the exact nature of which we are unsure) and (B) photograph. Abbreviations: en, external nares; fr, frontal; max, maxilla; na, nasal; pre, premaxilla; prf, prefrontal.
Snout in lateral (right) view, (A) photograph and (B) line drawing (grey shaded area represents the orbital cavity, grey lines represents sutures we are unsure of). Abbreviations: al, alveolus; max, maxilla; na, nasal; orb, orbit; pal, palatine; pre, premaxilla; prf, prefrontal; sut?, suture?; tc, tooth crown.
Snout in ventral (palatal) view, (A) line drawing (grey lines represent the sutures we are unsure of) and (B) photograph. Abbreviations: al, alveolus; max, maxilla; pal, palatine; pre, premaxilla; sof, suborbital fenestra; sut?, suture?; tc, tooth crown.
Braincase: in (A) dorsal view, (B) ventral view and (C) occipital view. Abbreviations: bt, basal tubera; eo, exocciptial; fm, foramen magnum; pa, parietal; qu, quadrate; soc, supraoccipital; sq, squamosal; stf, supratemporal fenestra.
Braincase and intertemporal bar in: (A) dorsal view and (B) ventral view. Abbreviations: bt, basal tubera; crB, crest B; fr, frontal; ic, foramen for the internal carotid artery; oc, occipital condyle; pa, parietal; pop, paroccipital process; qu, quadrate; quas, quadrate articular surface; sq, squamosal.
Close-up on the articular surface of the right quadrate. Abbreviations: bt, basal tubera; crB, crest B; oc, occipital condyle; qu, quadrate; quas, quadrate articular surface; sq, squamosal.
Braincase in occipital view, (A) photograph and (B) line drawing (filled grey areas represent foramina). Abbreviations: XI?, foramen for cranial nerve XI?; art, articular; bo, basioccipital; bt, basal tubera; dso, depression for the supraoccipital; eo, exoccipital; fm, foramen magnum; ic, foramen for the internal carotid artery; oc, occipital condyle; pa, parietal; pop, paroccipital process; qu, quadrate; quas, quadrate articular surface; sq, squamosal; sut?, suture?.
Mandible, with the left ramus is lateral view and the right ramus in medial view.
Mandible, right ramus in lateral view.
Posterior half of the left mandibular ramus in: (A) lateral view, (B) medial view, (C) dorsal view and (D) ventral view.
Posterior half of the right mandibular ramus in: (A) lateral view, (B) medial view, (C) dorsal view and (D) ventral view.
Mandibular symphysis in dorsal view, (A) line drawing and (B) photograph. Abbreviations: al, alveolus; co, coronoid, den, dentary; sp, splenial.
Isolated tooth crown in: (A) right lateral view, (B) left lateral view and (C) dorsal (apical) view.
Close-up on the carinae of an isolated tooth crown, (A) anterior carina and (B) posterior carina.
Recently, however, it has been suggested that Dakosaurus manselii may also not belong within the genus Dakosaurus. This contention was first suggested by Young et al. , based on a subsidiary phylogenetic analysis (presented in their supplementary material and differing from their primary analysis in the use of some ordered characters) that found D. manselii to be the sister taxon of the clade Geosaurus + Dakosaurus. This change in position was solely based on dental characters. Young et al.  re-iterated in their discussion of metriorhynchid denticle evolution that the taxonomic affinities of D. manselii are currently unclear. They noted that D. manselii has microscopic denticles (whereas both D. maximus and D. andiniensis have macroscopic denticles), and apicobasally aligned ridges on both the labial and lingual surfaces (which D. maximus and D. andiniensis lack). Updated anatomical information, therefore, is necessary for resolving the affinities of D. manselii. Furthermore, the systematic placement of D. manselii also has bearing on the systematics, especially the generic placement, of D. nicaeensis, a poorly-understood species that shares an unusual large dentition with both D. manselii and D. maximus. If D. manselii does not belong to the same subclade as D. maximus, then this distinctive dentition would be homoplastic and insufficient for assigning D. nicaeensis to Dakosaurus. Resolving the phylogenetic position of D. manselii, therefore, is currently one of the most pressing issues in metriorhynchid systematics and a keystone upon which rests many wider issues of metriorhynchid classification and phylogeny.
Despite the recent upsurge of interest in metriorhynchid phylogeny and evolution, the original specimens of Dakosaurus maximus and “Dakosaurus” manselii from Europe have received little attention. In fact, they have been only briefly described in the literature (with Fraas’  monograph of Geosaurus [Cricosaurus] suevicus and Dakosaurus maximus being the only exception), which makes it difficult to incorporate them into phylogenetic analyses and compare them with newly discovered specimens. This is especially surprising given that several new species and specimens have been assigned to the genus Dakosaurus in recent years, including spectacularly preserved material that has revealed the strong bite forces and theropod-like skulls characteristic of the genus ,  (Fig. 1). Here we redescribe the type specimens of Dakosaurus maximus and “D.” manselii, as well as a large partial skull and mandible assigned to “Pliosaurus trochanterius” (and later Machimosaurus mosae), which we conclusively demonstrate is a metriorhynchid and, for the first time, refer to “D.” manselii. These redescriptions reveal a number of characters unique to each species, and allow us to present a comprehensive osteology for these important historical taxa. Furthermore, these redescriptions highlight significant craniodental differences between D. maximus and “D.” manselii, and show that there are numerous autapomorphies shared by D. maximus and D. andiniensis that are absent in “D.” manselii. We then incorporate new information gleaned from these redescriptions into a revised phylogenetic analysis of Thalattosuchia. Most importantly, this analysis does not recover a distinct grouping of D. maximus, D. andiniensis, and “D.” manselii, which supports the removal of the latter species into its own genus, the resurrected Plesiosuchus. Based on our greater understanding of Geosaurini craniodental form we also revise the generic diagnoses for Geosaurus and Torvoneustes. Finally, based on our craniodental descriptions of D. maximus and “D.” manselii we outline hypothetical feeding behaviours for both species, and hypothesise that trophic specialisation enabled these two species to co-exist in the same ecosystem.
BRSMG, Bristol City Museum and Art Gallery, Bristol, UK; BSPG, Bayerische Staatssammlung für Paläontologie und Geologie, München, Germany; CAMSM, Sedgwick Museum, Cambridge, UK; CM, Carnegie Museum of Natural History, Pittsburgh, PA, USA; GLAHM, Hunterian Museum, Glasgow, UK; JME, Jura Museum, Eichstätt, Germany; MOZ, Museo Profesor J. Olsacher, Zapala, Argentina; MUJA, Museo del Jurásico de Asturias, Colunga, Spain; NHMUK, Natural History Museum, London, UK; NMS, Naturmuseum Solothurn, Switzerland; OUMNH, Oxford University Museum of Natural History, Oxford, UK; SMNS, Staatliches Museum für Naturkunde Stuttgart, Germany.
Historical Overview of Dakosaurus maximus
The first species assigned to the genus Dakosaurus was D. maximus, which was first erected as Geosaurus maximus by Plieninger , for an isolated tooth found at Schnaitheim, near Heidenheim, Baden-Württemberg, Germany (upper Kimmeridgian; Hybonoticeras beckeri Sub-Mediterranean ammonite Zone). Plieninger  later referred a partial dentary with six in situ teeth preserved in lithographic limestone from Ulm to Geosaurus maximus. Quenstedt ,  initially considered isolated teeth from Schnaitheim, very similar to those of figured by Plieninger, as belonging to the theropod dinosaur genus Megalosaurus. However, later he erected the name Dakosaurus for the Schnaitheim teeth and Plieninger’s species , . Furthermore, Quenstedt  referred a dentigerous bone (probably a partial maxilla) from Schnaitheim with three in situ crowns to D. maximus. As the type material of D. maximus is missing, Young & Andrade  suggested a skull and mandible described by Fraas  should be the neotype of the species. This specimen (SMNS 8203; Figs. 2, 3, 4) was found at Staufen, Baden-Württemberg, Germany, and was also from the upper Kimmeridgian H. beckeri Sub-Mediterranean ammonite Zone. Fraas  described a second D. maximus skull (SMNS 10819a, b; Fig. 5) from the upper Kimmeridgian of Sontheim an der Brenz, Baden-Württemberg, Germany.
During the 19th century there were numerous species assigned to Dakosaurus, most of which were erected for isolated teeth. Fraas  synonymised all Dakosaurus species with the exceptions of D. manselii (he considered D. manselii to be either a junior synonym of, or closely related to, D. maximus) and the tooth taxon D. paradoxus with D. maximus. Central to this argument, Fraas  demonstrated that the various morphological differences used to erect these numerous tooth taxa were actually part of a continuum of variation that was normal for a single species. This argument followed an earlier, but long neglected, study by Mason , who discussed the variation in mediolateral compression and symmetry in Dakosaurus teeth as being related to position in the tooth row, and to which bone the teeth belonged.
Two historic tooth taxa now considered as synonymous with D. maximus, Liodon paradoxus  and Teleosaurus suprajurensis , were erected for isolated teeth discovered in the lower Tithonian Diceras Limestones near Kelheim, Bavaria, Germany. Teleosaurus suprajurensis was considered to be a subjective junior synonym of D. maximus by Lydekker , von Zittel  and Fraas . Liodon paradoxus was referred to the early Tithonian species Cricosaurus grandis  by von Zittel , while Fraas  referred the species to Dakosaurus, based on a mandible with in situ teeth and isolated teeth from Schnaitheim. All teeth referred to D. paradoxus are less robust than those that had been referred to D. maximus during the mid 1800s, with a narrower labiolingual cross-section (see Fraas : Plate 2, Figs 1, 12, 13, and 14). This is the primary reason why Fraas  retained D. paradoxus as a separate species. Interestingly, however, the mandible Fraas  referred to D. paradoxus only preserves the anterior-most dentition. One specimen of Dakosaurus, SMNS 10819a, preserves the premaxilla and maxilla with in situ crowns (Fig. 5A). It demonstrates that the premaxillary and newly erupted maxillary crowns of D. maximus are notably less robust (narrower labiolingual cross-section) than fully-erupted maxillary crowns (confirming Mason ). In other words, Dakosaurus exhibits heterodonty across the tooth row, and not all of its teeth possess the ‘characteristic’ robust morphology that was assumed by early workers. As such, there are no grounds to retain D. paradoxus as a separate species.
Another historic tooth taxon now considered as D. maximus, Dakosaurus gracilis is known from small isolated teeth discovered in lower Tithonian deposits near Steinheim, Baden-Württemberg, Germany . Fraas  did not consider D. gracilis as a separate species, but regarded it to be at most a variety of D. maximus. An incomplete skeleton discovered from an unnamed Lower Cretaceous (early Hauterivian in age) formation in Département du Var, Provence-Alpes-Côte d’Azur, France was referred to as Dacosaurus maximus var. gracilis (sic) . Subsequently , another incomplete skeleton from a nearby locality (late Valanginian in age) was named Dacosaurus lapparenti (sic), and is now known as Geosaurus lapparenti .
Yet another historic taxon, Dakosaurus lissocephalus, is known from a poorly preserved and dorsoventrally crushed skull (CAMSM J29419) discovered in the upper Kimmeridgian (Aulacostephanus eudoxus Sub-Boreal ammonite Zone) Lower Kimmeridge Clay Formation of Ely, Cambridgeshire, England . Lydekker  considered this species to be a subjective junior synonym of D. maximus, while Fraas  provisionally synonymised the two. Young & Andrade (: appendix) considered D. lissocephalus and “Dakosaurus” manselii not to be conspecific, due to the shape of the supratemporal fenestra, squamosal, and parietal in D. lissocephalus being more reminiscent of D. andiniensis and D. maximus. Furthermore, they considered the synonymy between D. maximus and D. lissocephalus provisional. Here, we formally synonymise D. lissocephalus and D. maximus. This is due to two similarities that they share, unique to other Dakosaurus species. First, D. lissocephalus like other metriorhynchids has a quadrate distal articular surface separated into two protuberances (condyles) by a sulcus . Plesiosuchus manselii, on the other hand, lacks this sulcus (Fig. 15). Secondly, isolated teeth from the D. lissocephalus type locality (NHMUK PV OR20283) share the same suite of characters as the German D. maximus teeth (no apicobasally aligned ridges, large conspicuous denticles; Fig. 8). The P. manselii teeth, however, possess apicobasal ridges (of low-relief) and small denticles (Figs. 22, 23). As the type locality (a quarry in Ely) has subsequently been flooded, discovering more material to confirm these observations is difficult.
Finally, another historical taxon, Leiodon primaevum is known from isolated teeth discovered in the upper Kimmeridgian (A. autissiodorensis Sub-Boreal ammonite Zone) Argiles de Châtillon Formation of Boulogne-sur-Mer, Pas-de-Calais, France . Sauvage  later placed L. primaevum in Dacosaurus (sic) as D. primaevus. Lydekker , von Zittel  and Fraas  all considered this species to be a subjective junior synonym of D. maximus. We agree, as isolated teeth from the type locality (NHMUK PV OR32414; SMNS 57210) share the same suite of characters as the German D. maximus and the English teeth from Ely (see above). A partial left maxilla (SMNS 56999) from the locality also shares the same distinctive maxillary ornamentation as D. maximus (see description below; Fig. 7).
Historical Overview of Plesiosuchus manselii
The holotype of Plesiosuchus manselii is a broken and incomplete skull (NHMUK PV OR40103; Figs. 9, 10, 11, 12, 13) with a mandible and isolated post-cranial remains (NHMUK PV OR40103a; Figs. 17, 18, 22, 23) from a large individual discovered in the upper Kimmeridgian (A. autissiodorensis Sub-Boreal ammonite Zone) Lower Kimmeridge Clay Formation of Kimmeridge Bay, Dorset, England. The specific epithet manselii is frequently misspelt in the literature, generally as manseli or mansellii , –. The type and referred specimens were given to the British Museum (now in the Natural History Museum, London) by John Clavell Mansel-Pleydell in 1866. During the 1860s Mansel-Pleydell discovered the remains of several large-bodied marine reptiles along the coast of Dorset, most especially at Kimmeridge Bay. He discovered the remains of P. manselii in a reef at Kimmeridge Bay, exposed at low tide .
The holotype of Plesiosuchus manselii was described by Hulke in two papers. In the first, Hulke  described the right mandibular ramus, isolated vertebrae, an isolated premaxilla, a femur and a dentigerous bone that he tentatively referred to as the “upper maxilla” (these specimens are now curated as NHMUK PV OR40103a, although the isolated premaxilla is now part of NHMUK PV OR40103). He referred the specimens to Geoffroy’s  Steneosaurus rostro-minor. Hulke  posited that NHMUK PV OR40103a was probably identical to Cuvier’s  second Honfleur gavial “tête à museau plus court”, that the dentition of NHMUK PV OR40103a was identical to Dakosaurus maximus, and that all these species/specimens could be referred to Steneosaurus rostro-minor. It must be noted that metriorhynchids were poorly known at this time, with Dakosaurus maximus known only from isolated teeth and a fragments of dentigerous bones with in situ crowns, while Cuvier’s  “tête à museau plus court” was a chimera of two metriorhynchid species (Metriorhynchus superciliosus and M. geoffroyii , ). The characteristics Hulke  used to unite these specimens are now known to be either metriorhynchid apomorphies (e.g. oval, “spoon-shaped” external nares; three premaxillary alveoli; absence of external mandibular fenestrae; distinct coronoid process on the mandible) or Geosaurini apomorphies (e.g. bicarinate serrated dentition). Other characteristics used were subsequently found to have been widespread in Mesozoic crocodylomorphs (e.g. teeth with apicobasal ‘striations’; teeth that are unequally convex, that have some degree of mediolateral compression and recurve lingually; amphicoelous vertebrae). A note was added to the end of the first publication stating a “considerable part of the skull” had been discovered through further examination of the material presented to the British Museum.
In the second paper, Hulke  described a skull, which is preserved in two sections: the rostrum and the occiput (the latter with partial supratemporal arches preserved; now curated as NHMUK PV OR40103; Fig. 9). Initially, the then matrix-encased skull was believed to pliosaurian and set aside; it was the preparator Mr Davies that realised the skull material was in fact crocodylian in nature . It was here that the specific epithet manselii was erected as Steneosaurus Manselii (sic). The “head” (NHMUK PV OR40103) and the “lower jaw and associated post-crania” (NHMUK PV OR40103a, the specimen described by Hulke ) have been considered to be from the same individual. Hulke (:167) stated: “The general agreement of their dimensions, and their discovery near together (in a reef exposed at low water in Kimmeridge Bay), make it highly probable that this head and the lower jaw both belonged to one individual”. We agree that the two specimens are most likely from the same individual, especially as the size of the two specimens is comparable.
Interestingly, the isolated bone fragment referred to as the “upper maxilla” has never been figured and cannot be located. Hulke  describes the specimen as being a fragment of 14 cm in length, containing five alveoli of which four still have portions of teeth remaining in situ. Furthermore, the bone is not mentioned in the latter publication (unlike the mandible and premaxilla). There is a possibility as to why this specimen cannot be located. A note in the NHMUK specimen register beside NHMUK PV OR40103 states that some of the material was destroyed, with a date of 1 August 1931. Unfortunately, what was destroyed is not stated. As both NHMUK PV OR40103 and NHMUK PV OR40103a suffer pyrite decay and require periodic conservation, it is possible that the “upper maxilla” was destroyed after extensive decay. A box of NHMUK PV OR40103 fragments was discovered by one of us (LS), and it could represent some of the destroyed material.
Owen  erected the genus Plesiosuchus for Steneosaurus manselii as he considered it to be more similar, in a morphological sense, to extant crocodylians than to Steneosaurus. Woodward  referred the species to the genus Dakosaurus. Lydekker (:92) saw no reason to separate P. manselii from D. maximus, considering the former to be a subjective junior synonym of the latter. It appears as if this decision was based on dental characteristics, as previous authors noticed the similarity between the dentition of P. manselii and D. maximus , , , . Woodward’s  taxonomic decision could not have been based on craniomandibular morphology, as the first D. maximus skull was not described until several years later . Fraas  regarded P. manselii either as a junior synonym of, or closely related to, D. maximus; interestingly, however, he did not include P. manselii in his synonymy list of D. maximus. The phylogenetic analysis of Young & Andrade  supports the hypothesis that the two are separate species. As stated above, there has been a growing realisation that Dakosaurus/Plesiosuchus manselii may not belong within Dakosaurus and that its taxonomic affinities are unclear , .
The Lost ‘Pliosaurus trochanterius’ Skull and Mandible
In 1866, Mansel-Pleydell presented numerous marine reptile fossils he discovered at Kimmeridge Bay to the British Museum. One of these specimens, a mandible and an incomplete skull (braincase with part of the supratemporal arches), was from an individual even larger than the “D.” manselii holotype (NHMUK PV OR40103). As with NHMUK PV OR40103, this specimen (NHMUK PV R1089; Figs. 14, 15, 16, 19, 20, 21) was initially considered to belong to a pliosaurid plesiosaur. It was originally described by Owen  within his species Pliosaurus trochanterius. However, Owen never provided evidence to show that NHMUK PV R1089 belonged within the species. There are no overlapping elements, as Owen ,  erected Pliosaurus trochanterius based on an isolated femur (according to Brown  it is actually a humerus). Additionally, they come from different localities: Pliosaurus trochanterius is from the early Tithonian of Shotover Hill, Oxfordshire, England, whereas NHMUK PV R1089 is from the early Tithonian of Kimmeridge Bay, Dorset. Eudes-Deslongchamps (:329) quickly demonstrated the crocodylian affinities of NHMUK PV R1089, and referred it to the metriorhynchid genus Metriorhynchus, as did Woodward (:502). Lydekker (:104), however, believed the specimen belonged to the teleosaurid species Machimosaurus mosae, although he noted that it lacked the anterior transverse expansion of the mandibular symphysis seen in teleosaurids. Tarlo  considered the specimen to be crocodylian, while Buffetaut  considered it to be a large metriorhynchid, probably Dakosaurus. More recently, Benton & Spencer  figured NHMUK PV R1089 as the plesiosaur Colymbosaurus trochanterius, while Vignaud  referred the specimen to the teleosaurid species Machimosaurus mosae.
Following Hua et al. , there are two valid species of Machimosaurus in the Late Jurassic of Europe: the type species Machimosaurus hugii (early–late Kimmeridgian of France, Portugal and Switzerland) and M. mosae (latest Kimmeridgian of France). Comparing NHMUK PV R1089 to the mandibles of M. hugii  and M. mosae  clearly shows it does not belong to Machimosaurus. Both species of Machimosaurus possess external mandibular fenestrae and an anterior transverse expansion of the mandibular symphysis, whereas NHMUK PV R1089 lacks both features. Additionally, both species of Machimosaurus lack the prearticular, which is present in NHMUK PV R1089. The absence of the external mandibular fenestrae is a metriorhynchid apomorphy, while the anterior transverse expansion of the mandibular symphysis and loss of the prearticular are teleosaurid apomorphies ,  (Hua pers. comm. 2011). In addition, NHMUK PV R1089 has far fewer dentary alveoli than either Machimosaurus species: 13 compared to their 19–25. This extreme reduction in dentition is observed in geosaurine metriorhynchids (Table 1).
Furthermore, the dentary interalveolar spaces of NHMUK PV R1089 are very small, far smaller than in both Machimosaurus species, and most thalattosuchians. In teleosaurids , –, metriorhynchine metriorhynchids , ,  and basal geosaurine metriorhynchids (“Metriorhynchus” brachyrhynchus and “Mr Leeds’ specimen” , ) the dentary symphyseal interalveolar spaces are variable in size, ranging from being larger than the proceeding and preceding alveolus, to being half the size. The extreme reduction in dentary symphyseal interalveolar distances in NHMUK PV R1089 (always being less than a quarter the length of the immediate alveoli, and usually even smaller; Fig. 21) is characteristic of Geosaurini metriorhynchids (Dakosaurus maximus: Figs. 2, 3; Torvoneustes carpenteri ). This reduction in symphyseal interalveolar spaces means the typical thalattosuchian ‘diastema’ between dentary alveoli 4 and 5 is absent , , , , , . Curiously, both the extreme reduction in symphyseal interalveolar spaces and the absence of the D4–D5 ‘diastema’ are observed in the holotype of the geosaurine metriorhynchid Suchodus durobrivensis (NHMUK PV R1994: a mandibular symphysis). These unusual two characteristics were first highlighted by Lydekker (:287); moreover, he noted there was “marked resemblance between” the Suchodus durobrivensis holotype and NHMUK PV R1089. This has led two of us (MTY and LS) to begin re-examining the NHMUK Callovian metriorhynchids to determine whether the synonymy of Suchodus durobrivensis and “Metriorhynchus” brachyrhynchus is valid , ; as such, herein we do not follow Young et al.  in referring “Metriorhynchus” brachyrhynchus to the genus Suchodus.
The occiput/braincase of NHMUK PV R1089 exhibits two metriorhynchid autapomorphies: 1) enlarged carotid artery foramina ventrolateral to the foramen magnum (apomorphy was confirmed through computed tomography scanning of an Oxfordian braincase ); and 2) the trigeminal fossa is developed mainly posterior to the trigeminal foramen . As such, we can conclusively refer NHMUK PV R1089 to Metriorhynchidae, and by extension remove it from Machimosaurus mosae.
Although we can refer NHMUK PV R1089 to Metriorhynchidae, can we refer it to Dakosaurus/Plesiosuchus manselii? The surangulodentary groove in NHMUK PV R1089 and NHMUK PV OR40103a is deeply excavated and strongly developed on both elements (Figs. 17, 18, 19, 20). This morphology is only observed in D. maximus (SMNS 8203, SMNS 82043; Figs. 2, 6) and D. andiniensis ,  among metriorhynchids (and to some extent in the more poorly preserved specimens of Geosaurus giganteus ). This therefore allows us to assign it to Geosaurini. We can exclude both the holotype of D./P. manselii and NHMUK PV R1089 from D. maximus because they lack the sharp dorsal inclination of the ventral margin of dentary and the raised alveolar margins of the posterior dentary alveoli that are characteristic of this species (see below; compare Fig. 2 with Figs. 17, 18, 21). Furthermore, both the holotype of D./P. manselii and NHMUK PV R1089 share a cranial apomorphy: distal articular surface of the quadrate is not divided into two condyles by a sulcus (Fig. 15), which is an unusual feature among archosaurs. This suite of shared derived characters (see Table 2) allows us to refer NHMUK PV R1089 to Dakosaurus/Plesiosuchus manselii.
We had permission to look at, and photograph, the relevant collections in the MUJA, NHMUK and SMNS. The curators whose remit includes fossil crocodylians from the MUJA (JIR-O), NHMUK (LS) and SMNS (RS) are co-authors on this manuscript. None of these specimens were purchased, donated or loaned as part of this study.
We undertook two phylogenetic analyses to assess the evolutionary relationships of Dakosaurus and Plesiosuchus within Thalattosuchia. This analysis is the latest in a series of iterative analyses, beginning with the publication of Young & Andrade , in which our research group (led by MTY) has added new character data and newly-described taxa to a growing discrete character dataset. The analysis presented here is a revised version of the most recent analysis by our group, that published by Young et al. . See the online supplementary material for sources of character coding and the character list (Text S1) and the character scores (Text S2). Here, craniomandibular and dental characters make up 73% (175/240) of the character list, while the post-cranial characters contribute 27% (65/240). The analysis presented here differs from that of Young et al.  in that:
- 39 new or revised characters have been added.
- We have revised the character codings of Dakosaurus maximus and Plesiosuchus manselii based on first-hand examination and the anatomical revisions presented in this monograph.
- Erpetosuchus granti is no longer included in the analysis, with the outgroup taxon now being Postosuchus kirkpatricki. Recent comprehensive phylogenetic work on the relationships of basal archosaurs ,  strongly supports the close relationship of Postosuchus (and related rauisuchians) with crocodylomorphs but does not corroborate previous hypotheses ,  that Erpetosuchus, a taxon known only from highly incomplete material, is a close crocodylomorph outgroup. Additionally, the fragmentary nature of known Erpetosuchus specimens results in a high amount of missing data when this taxon is scored in phylogenetic analyses, which is not a desired characteristic of an outgroup taxon used to root phylogenetic trees.
- We have expanded the non-metriorhynchid taxon selection substantially, with eight more teleosaurids and 16 non-thalattosuchians, resulting in 73 total taxa.
- The putative Dakosaurus specimens from Mexico were removed due to their poor preservation and the fact that we cannot be sure they belong to the same taxon.
- The metriorhynchid Purranisaurus potens was removed, as its type specimen is currently under re-description by one of us (MF) with colleagues. This redescription will result in a more confident set of character scores for this taxon.
- Finally, we recoded “Metriorhynchus” brachyrhynchus due to the uncertainty of whether the Suchodus durobrivensis holotype is a junior synonym of the former (see above discussion regarding dentary interalveolar spaces). This is currently being investigated by two of us (MTY and LS).
The two phylogenetic analyses were carried out using TNT v1.1 (Willi Hennig Society Edition) . They differed in that: 1) the first analysis had all characters treated as unordered, while 2) in the second analysis 40 multi-state characters were treated as ordered (transformational sequences). The 1st, 7th, 8th, 10th, 13th, 25th, 38th, 39th, 42nd, 43rd, 47th, 50th, 56th, 58th, 69th, 86th, 87th, 96th, 126th, 132nd, 133rd, 151st, 152nd, 154th, 156th, 166th, 179th, 181st, 182nd, 183rd, 184th, 198th, 202nd, 214th, 218th, 225th, 228th, 230th, 231st and 237th characters are ordered in the second analysis. Other than the ordering of those 40 characters the analyses were identical.
Tree-space was searched using the advanced search methods in TNT, namely: sectorial search, tree fusion, ratchet and drift, for 1,000 random addition replicates. The default settings for the advanced search methods were changed to increase the iterations of each method per replicate: now 100 sectorial search drifting cycles, 100 ratchet iterations, 100 drift cycles and 100 rounds of tree fusion per replicate. This tree-space search procedure was repeated for five different random start seeds. All characters were treated with equal weight. Character polarity was determined with reference to a pre-defined non-crocodylomorph outgroup taxon (Postosuchus kirkpatricki). Nodal support was evaluated using non-parametric bootstrapping  with 1000 replicates, using TBR searching.
Geosaurus Cuvier, 1824 .
Metriorhynchid crocodylomorphs with the following unique combination of characters (autapomorphic characters are indicated by an asterisk): high absolute tooth-crown apicobasal length (in some species exceeding 12 centimetres)*; contiguous row of true denticles along the mesial and distal carinae of the teeth*; bicarinate serrated dentition; the inflexion point of the prefrontal lateral margin (in dorsal view) is directed posteriorly at an angle less of 70 degrees or less from the anteroposterior axis of the skull*; acute angle between the medial and the posterolateral processes of the frontal; supratemporal fenestrae enlarged, in dorsal view the posterolateral corner extends further posterior to the intertemporal bar*; all dentary interalveolar distances are very small (always less than a quarter the length of the immediate alveoli)*; dentary tooth-row is ventrally displaced relative to the jaw joint; humerus shaft greatly reduced, contributing less than 25% of total humeral length.
The least inclusive clade consisting of Geosaurus giganteus, Dakosaurus maximus and Torvoneustes carpenteri (sensu Cau & Fanti ).
Dakosaurus Quenstedt, 1856 .
Geosaurus maximus Plieninger, 1846  (following Recommendation 67B of the ICZN Code).
D. andiniensis Vignaud & Gasparini, 1996 .
“Biter lizard”. Dakos (δάχος from Quenstedt :785) is derived from the Ancient Greek ‘to bite’ (δάχυω). Furthermore, Quenstedt (:182) places δάχος in parentheses beside Beisser, the German for biter. While –saurus is the latinised version of sauros, the Ancient Greek for lizard. Note that Wilkinson et al.  incorrectly translated Dakos as meaning “tearing”.
Upper Kimmeridgian to lower Berriasian.
Europe (England, France, Germany and Switzerland) and South America (Argentina).
Possible Dakosaurus remains have been found at Khoroshevskii Island, in the Volga region of Russia . They consist of a vertebra and metatarsal from upper Tithonian or lower Berriasian deposits. The possible referral to Dakosaurus is presumably due to their large size. However, as there are currently no vertebral or metatarsal Dakosaurus autapomorphies this referral cannot be substantiated. The taxonomic affinities of the two fragmentary skull specimens from the Kimmeridgian of Mexico are in question due to newly discovered metriorhynchine specimens from the early Tithonian of Mexico (see discussion; ).
Quenstedt ,  used the spelling, Dakosaurus for the genus. However, there has been a question around the transliteration of the Greek letter χ into the Latin letters c and k. During the latter half of the 19th century and the first half of the 20th century Dacosaurus was the predominant spelling –, , , , , , . From the latter half of the 20th century onwards the original spelling, Dakosaurus, became dominant , , –, , –, , . The first use of the “c” spelling was by Sauvage (:380), while Lydekker (:92) was the first to explicitly state that the original spelling had been amended to Dacosaurus. However, under the ICZN Code (Article 32.5) an incorrect original spelling cannot be corrected solely on the grounds that it was incorrectly transliterated or latinized. As such, the genus is properly spelt Dakosaurus.
Metriorhynchid crocodylomorph with the following unique combination of characters (autapomorphic characters are indicated by an asterisk): large robust teeth, with moderate to strong mediolateral compression; carinae formed by a keel and true macroscopic denticles (macroziphodonty, all dimensions exceed 300 µm)*; tooth enamel ornamentation is inconspicuous, visible under SEM and comprising an anastomosed pattern; rostrum proportionately short (brevirostrine, less than 55% of basicranial length), dorsoventrally tall with a convex dorsal margin (oreinirostral)*, and in dorsal view has a distinctly wide and blunt, “bullet” shape (amblygnathous)*; separation between premaxilla and nasal half, or less than half, the midline length of the premaxilla; aligned set of large neurovascular foramina on the maxilla extending posteroventrally from the preorbital fossa (not homologous to the archosaurian antorbital fenestra , ) *; in dorsal view, the lateral margins of the prefrontals have an inflexion point directed posteriorly at an angle of approximately 50 degrees from the anteroposterior axis of the skull*; acute angle (between 60 and 45 degrees depending on species) between the medial and the posterolateral processes of the frontal; the supratemporal fossae (intratemporal flange) reach the minimum interorbital distance; ventral margin of dentary sharply rises dorsally at the anterior tip*; very short mandibular symphysis (only one third of dentary tooth-row adjacent to the symphysis)*; surangulodentary groove has a well-developed foramen at the dentary terminus*; surangular anteroposteriorly short, terminates posterior to the anterior margin of the orbit.
1843 Megalosaurus sp. –Quenstedt, p. 493. 
v 1856 Dakosaurus maximus (Plieninger) gen. et comb. nov. –Quenstedt, p. 131. 
v 1858 Dakosaurus maximus (Plieninger) –Quenstedt, p. 785. 
v* 1869 Dakosaurus lissocephalus sp. nov. – Seeley, p. 92. 
* 1871 Leiodon primaevum sp. nov. – Sauvage, p. 141. 
* 1881 Teleosaurus suprajurensis sp. nov. – Schlosser. 
v 1885 Dakosaurus maximus (Plieninger) –Quenstedt, p. 182. 
v* 1885 Dakosaurus gracilis sp. nov. –Quenstedt, p. 184. 
v 1902 Dacosaurus suprajurensis (Schlosser) comb. nov. – Fraas, p. 20 (sic) 
1925 Dakosaurus maximus (Plieninger) – Huene, p. 600, plate 26 Figure 57. 
v 2009 Dakosaurus lissocephalus (Seeley) – Young & Andrade, p. 579. 
v 2010 Dakosaurus lissocephalus (Seeley) – Young et al., p. 859. 
Isolated tooth, the location of which is unknown and is presumed lost.
‘Greatest biter lizard’. From the Latin maximus, meaning largest/greatest.
Holotype locality and horizon.
Schnaitheim, Baden-Württemberg, Germany. Mergelstätten Formation. Hybonoticeras beckeri Sub-Mediterranean ammonite Zone, upper Kimmeridgian, Upper Jurassic.
SMNS 8203– incomplete skull and mandible (first suggested by Young & Andrade ).
Neotype locality and horizon.
Staufen bei Giengen, Baden-Württemberg, Germany. Mergelstätten Formation. Hybonoticeras beckeri Sub-Mediterranean ammonite Zone, upper Kimmeridgian, Upper Jurassic.
Designation of neotype.
Herein we formally designate SMNS 8203 as the neotype of Dakosaurus maximus. In order to be in full accordance of Article 75 of the ICZN Code, in particular Article 75.3, we make the following statements:
- This designation is made with the express purpose of clarifying the taxonomic status of Dakosaurus maximus.
- Our statement of the characters that we regard as differentiating Dakosaurus maximus from other taxa is given by the species diagnosis below.
- The neotype can be recognised through both the description below and Figs. 2, 3, and 4.
- The holotype (an isolated tooth) cannot be located and is presumed lost. The type was described in the 1846 , and there is no known documentation to suggest which institution the holotype was given to, assuming the specimen was curated in a scientific institution.
- The holotype is an isolated tooth, from the description and figure given by Plieninger  show it was both robust and macroziphodont. As such, the neotype is consistent with what is known of the former name-bearing type.
- While the neotype is not from the same locality as the holotype, both are from the same Sub-Mediterranean ammonite Zone. The two localities are little over 10 km from one another.
- The neotype is the property of a recognized scientific institution, SMNS, which maintains a research collection with proper facilities for preserving name-bearing types, and is accessible for study.
Upper Kimmeridgian (A. eudoxus Sub-Boreal ammonite Zone) to lower Tithonian (H. hybonotum Sub-Mediterranean ammonite Zone).
Cambridgeshire, England; Pas-de-Calais, France; Baden-Württemberg & Bayern, Germany; Canton Solothurn, Switzerland.
NHMUK PV OR33186, NHMUK PV OR35766, NHMUK PV OR35835, NHMUK PV OR35836, NHMUK PV OR35837, SMNS 51494, SMNS 55420, SMNS 80148: isolated teeth from Schnaitheim (H. beckeri Sub-Mediterranean Zone); SMNS 81793: isolated tooth from Nusplingen, Baden-Württemberg, Germany (H. beckeri Sub-Mediterranean Zone); SMNS 10819a, b: broken and dorsoventrally compressed skull from Sontheim an der Brenz, Baden-Württemberg, Germany; SMNS 82043: right mandibular ramus in lithographic limestone, from Painten, Bayern, Germany; CAMSM J29419: incomplete dorsoventrally crushed skull (holotype of D. lissocephalus) from Ely, Cambridgeshire, England, Lower Kimmeridge Clay Formation (A. eudoxus Sub-Boreal Zone); NHMUK PV OR20283: an isolated tooth, also from Ely, England; NHMUK PV OR32414, SMNS 57210: isolated teeth from Boulogne-sur-Mer, Pas-de-Calais, France, Argiles de Châtillon Formation (A. autissiodorensis Sub-Boreal Zone); SMNS 56999: partial maxilla also from Boulogne-sur-Mer, France; NMS 7009: isolated tooth from Canton Solothurn, Switzerland, Reuchenette Formation (upper Kimmeridgian); JME-SOS4577, JME-SOS2535: isolated teeth from Schernfeld, Bayern, Germany, Solnhofen Formation (lower Tithonian; H. hybonotum Sub-Mediterranean Zone).
Metriorhynchid crocodylomorph within the genus Dakosaurus with four autapomorphic characters: 1) wear facets on the mesial and distal edges of the crown that obliterate the carinae; 2) thin lamina of bone projecting from the lateral alveolar margin of the premaxilla (“premaxillary lateral plates”); 3) maxilla is strongly ornamented, with most of the element covered in long deep grooves and long raised ridges orientated to the long axis of the skull, but with the alveolar margin largely smooth; 4) in the posterior half of the dentary, there are laminae of bone projecting from the lateral and medial dentary alveolar margins (“dentary lateral and medial plates”). Note that the preservation of Dakosaurus andiniensis makes it difficult to assess whether it also possesses characteristics one and two.
Body length estimate.
The largest known specimen of Dakosaurus maximus is the isolated mandible SMNS 82043 (Fig. 6), which is 87.5 cm in length. Using the ratio of basicranial length to mandibular length in “Metriorhynchus” brachyrhynchus as a guide (NHMUK PV R3804: the most three-dimensionally preserved NHMUK specimen with a complete skull and mandible; mandible length = 80.9 cm, basicranial length = 76.8 cm) and assuming that the basicranium and mandibles of D. maximus scale in the same proportions, SMNS 82043 is estimated as having a basicranial length of 83.1 cm. This gives a total body length estimate of 4.49 m, using the Young et al.  equations. This is slightly greater than the body length given in Young et al. , however that was based on an estimated length of the neotype SMNS 8203, which they found to be 4.28 m long.
Description and Comparisons
Skull: general comments.
Many cranial and mandibular bones are preserved in the neotype (SMNS 8203; Figs. 2, 3, 4), referred cranial elements (SMNS 10819, Fig. 5; SMNS 56999, Fig. 7) and the referred mandible (SMNS 82043, Fig. 6), but several other bones are not preserved and are thus unknown in D. maximus. These include: jugals, lacrimals, frontal, parietal, postorbitals, squamosals, quadrates, braincase, occiput, pterygoids and ectopterygoids. Overall, the skull has a shape very similar to that of D. andiniensis: they both have a short, broad “bullet”-shaped snout (amblygnathous), which is very robust and has a convex upper margin (oreinirostral) (see Fig. 3).
Premaxilla and external nares.
The premaxilla bears three alveoli, as with all other metriorhynchids , , . The ornamentation on the lateral surface of the premaxilla is composed of numerous large elliptic pits, and the bone is slightly convex laterally (SMNS 8203, Figs. 2, 3, 4; SMNS 10819a, Fig. 5A). The premaxillae completely enclose the external nares, as in all thalattosuchians with the exception of Cricosaurus macrospondylus (in which the maxilla also contributes ). Along the posterior margin of the premaxilla, the posterodorsal process contacts the anterior margin of the maxilla. This suture forms a broad ‘U’-shape in dorsal view (much like D. andiniensis , ), rather than a posteriorly pointed ‘V’-shape (such as in Metriorhynchus superciliosus, Gracilineustes leedsi and “Metriorhynchus” brachyrhynchus ). As with almost all thalattosuchians, there is no premaxilla-nasal contact , as these bones are separated by the maxilla. The palatal surface of the premaxilla in D. maximus is unknown.
Along the lateral margin of the premaxilla there is a thin lamina of bone that covers the basal portion of the teeth (SMNS 8203; Fig. 4A, 4B). This morphology is somewhat similar to the ‘lateral plates’ observed in sauropod dinosaurs (e.g. Diplodocus longus CM 11161). Finite element analysis modelling of this skull by Young et al.  found that, regardless of the feeding behaviour simulated, high stresses occurred at the tooth bases and the ‘lateral plates’ during feeding. These results support the hypothesis that ‘lateral plates’ help to dissipate feeding-induced stresses acting on the bases of adjacent teeth , which we hypothesise was their function in D. maximus. Dakosaurus/Plesiosuchus manselii (NHMUK PV OR40103) lacks these structures (as do all other known metriorhynchids , ), while the state of preservation makes determining this morphology difficult in Dakosaurus andiniensis . Therefore, we regard them as an autapomorphy of D. maximus, but note that future discoveries may reveal that they are more widely distributed among Dakosaurus species.
In Dakosaurus maximus there is a single, anterodorsally facing external naris (Figs. 2, 3, 5). This condition is also seen in most other metriorhynchids, such as Dakosaurus andiniensis , , Metriorhynchus superciliosus (e.g. NHMUK PV R6859, NHMUK PV R6860), Gracilineustes leedsi (e.g. NHMUK PV R3014, NHMUK PV R3015) and “Metriorhynchus” brachyrhynchus (NHMUK PV R3804). The members of the subclade Rhacheosaurini have a different morphology, in which the naris is divided by a premaxillary septum and is anterodorsally and laterally oriented (e.g. Rhacheosaurus gracilis NHMUK PV R3948; Cricosaurus suevicus SMNS 9808).
The maxillae are similar to those of Dakosaurus andiniensis, as they are noticeably short, high and subtriangular in lateral view , . One difference is that the maxillae of Dakosaurus maximus are not as high dorsoventrally (compare Figs. 1, 2). Gasparini et al.  compared the ratio of snout height to snout length among various crocodylomorphs, and they found that D. maximus had a ratio of 0.15, whereas D. andiniensis had an even greater ratio of 0.36. This was in marked contrast to other thalattosuchians, as longirostrine species had a ratio of 0.04–0.05 (e.g. Steneosaurus bollensis, Pelagosaurus typus and Cricosaurus araucanensis) while mesorostrine metriorhynchids had a ratio of 0.08–0.09 (Metriorhynchus superciliosus and “Metriorhynchus” casamiquelai).
The maxillae of D. maximus bear 13 alveoli (SMNS 8203, Fig. 2) . Like the premaxillae, the maxillae are slightly convex laterally. The ornamentation of the lateral surface in Dakosaurus maximus is distinctive, as it noticeably differs across the element (SMNS 8203, Figs. 2, 3, 4; SMNS 10819a, Fig. 5; SMNS 56999, Fig. 7). Near the premaxilla-maxilla suture, the ornamentation is very similar to that on the premaxilla (numerous large elliptical pits). On most of the element, and in particular closer to the maxillary midline and maxillonasal suture, the surface is covered in long deep grooves and long raised ridges orientated parallel to the long axis of the skull. Approaching the alveolar margin, the ornamentation becomes more subtle, composed of ridges of low-relief arranged in an anastomosed pattern, creating a fabric of crests over the surface. Almost all of the maxillary foramina exit out on to the anastomosed region of the maxilla. The maxillae of D. andiniensis , Torvoneustes carpenteri  Cricosaurus schroederi and C. araucanensis (see Figure 5 in ), and Geosaurus giganteus  are largely smooth, with elliptical pits that are shallow and fairly indistinct.
Along the dorsal midline of the skull the left and right maxillae meet at a long suture, and terminate at the anterior margin of the nasal. The maxillonasal suture begins at the skull midline and forms an anteriorly pointed ‘V’-shape, as is also the case in D. andiniensis and other metriorhynchids , , , , . With the jugals and lacrimals either missing or not preserved in all specimens of D. maximus, the nature of their contact with the maxilla cannot be determined. Similarly, the contribution the maxilla made to the preorbital fossa is unknown.
The alveolar margin of the maxilla is poorly preserved in the neotype (SMNS 8203, Fig. 4B). As such, the presence or absence of ‘lateral plates’, like those seen on the premaxilla, is unknown. In the referred specimen SMNS 10819a (Fig. 5), the alveolar margin is also partially damaged, although the medial section of the maxilla does not seem to exhibit the ‘plates’. In palatal view, the maxillae of the neotype (SMNS 8203) are very poorly preserved. However, in SMNS 10819a the maxillae suture along the midline forming part of the secondary palate (Fig. 5B, 5C). The maxillopalatine suture is not preserved in any specimen. However, the midline terminus of the maxillopalatine suture must have been posterior to the eight anterior maxillary alveoli; as those teeth are preserved in SMNS 10819. This is comparable to other Geosaurini genera, except Plesiosuchus (i.e. Dakosaurus/Plesiosuchus manselii), where the maxillopalatine suture terminates level to the fourth maxillary alveolus (Table 1).
The nasals are large, paired, unfused elements (Figs. 2, 3). In dorsal view they are subtriangular in shape and broad, like in all thalattosuchians . Along the midline the dorsal surface of the nasals is deeply trenched, with a steep longitudinal depression (Fig. 3B), a characteristic shared by all metriorhynchoids ,  (e.g. Pelagosaurus typus NHMUK PV OR32599; Teleidosaurus calvadosii NHMUK PV R2681; Eoneustes gaudryi NHMUK PV R3353; Metriorhynchus superciliosus NHMUK PV R6859, NHMUK PV R6860; Gracilineustes leedsi NHMUK PV R3014, NHMUK PV R3015; “Metriorhynchus” brachyrhynchus NHMUK PV R3804). The anterior margin forms an acute angle along its border with the maxilla. Most of the dorsal and lateral surfaces of the nasals are well ornamented, with a pitted pattern. This is in contrast with other species in Geosaurini, which have nasals that are largely smooth (D. andiniensis , ; Torvoneustes carpenteri ; Geosaurus giganteus and G. grandis ; Plesiosuchus manselii NHMUK PV OR40103).
Although the frontal and lacrimals are missing, and the prefrontals are poorly preserved, it is possible to determine where these bones would have contacted the nasals by using the well preserved skull of D. andiniensis as a guide , . Along its posterior margin, the nasals would have contacted the frontal and prefrontals. The two dorsoposterior processes would have contacted the frontal medially, and the prefrontals laterally. Between the dorsoposterior and lateroposterior processes, the nasal would have contacted the prefrontals. Ventral to the lateroposterior processes the nasal would have contacted the lacrimal and contributed to the preorbital fossa margin. The presence of distinct nasal lateroposterior processes is a metriorhynchid apomorphy (see Young et al. : Figs 4A, 6 for a reconstruction of Teleidosaurus calvadosii and a photograph of Eoneustes gaudryi respectively, as these basal metriorhynchoids lack these processes).
Only the left prefrontal is present in SMNS 8203, and it is poorly preserved (Figs. 2, 3). As with other metriorhynchids, the left prefrontal has an enlarged, expanded dorsal surface, and therefore it is widely visible on the skull roof in dorsal view , , . Furthermore, enough of the prefrontal is preserved to show that this bone would have been expanded laterally to overhang the orbits. The prefrontal would have extended onto the lateral surface of the snout, between the orbit and the preorbital fenestra. However, this region of the prefrontal (the descending process) is also poorly preserved.
Fenestrae and fossae.
Due to the poor preservation of the neotype and referred specimens, the various cranial fossae and fenestrae characteristic of metriorhynchids are difficult to recognise. No specimen preserves the preorbital fossae (not homologous to the archosaurian antorbital fossae , ). These are typically elliptical and obliquely orientated in metriorhynchids, and much longer than higher , .
The exit for the post-temporal openings ( = post-temporal fenestra; post-temporal foramen) on the occipital surface of the skull cannot be determined for SMNS 10819 due to its preservation.
Other fenestrae are not preserved. Nevertheless, most thalattosuchians either lack or have a highly reduced naso-oral fenestra ( = incisive foramen, foramen incisivum); and metriorhynchids lack external mandibular fenestrae , . Neither the infratemporal fenestrae ( = laterotemporal fenestrae) nor the lacrimal-prefrontal fossae  are preserved.
Mandible: general comments.
The preservation of the left mandible is poor in the neotype (SMNS 8203; Fig. 2). The referred specimen SMNS 82043 is a much better preserved left ramus embedded in lithographic limestone (Fig. 6). The mandible of SMNS 8203 has twelve alveoli . The symphysis cannot be discerned in SMNS 82043 (because the medial surface of this specimen is obscured by matrix), while in SMNS 8203 it is very short, extending as far posteriorly as the 4th dentary alveolus. Both specimens preserve the lateral mandibular groove ( = surangulodentary groove) on the lateral surface of dentary and surangular. Assuming the preorbital fenestra was in the same position as in D. andiniensis; then the surangulodentary groove would have extended further anteriorly than it. This is in contrast to Geosaurus giganteus, in which the surangulodentary groove and the preorbital fenestra reach the same relative position . The groove is deeply excavated, and in SMNS 8203 a large foramen is present at the dentary terminus. The deep excavation of the surangulodentary groove is also present in Dakosaurus/Plesiosuchus manselii (see below), and although the mandible is more poorly preserved in Geosaurus giganteus it too seems to have a deeply excavated groove . This groove is present, but shallower, in all thalattosuchians, but can be easily obscured by post-mortem deformation (e.g. “Metriorhynchus” brachyrhynchus NHMUK PV R3804; Gracilineustes cf. acutus CAMSM J29475). As mentioned above, no external mandibular fenestra is evident.
As discussed by Young et al. , the mandible within Geosaurinae undergoes a characteristic shape change related to an increase in gape. All metriorhynchids exhibit some ventral displacement of the dentary tooth row, such that the coronoid process is located above the plane of the tooth row and is on the same plane as both the retroarticular process and the glenoid fossa (Metriorhynchus superciliosus: GLAHM V1141; Gracilineustes leedsi: NHMUK PV R3014, NHMUK PV R3015; “Metriorhynchus” brachyrhynchus: GLAHM V995, NHMUK PV R3804). The coronoid process is a metriorhynchid apomorphy, and basal non-metriorhynchid metriorhynchoids such as Teleidosaurus calvadosii lack this structure (NHMUK PV R2681, Figure 6 in Young et al. ). However, in the derived metriorhynchid clade of the “Mr Leeds’ specimen” (a new genus and species described by ) and Geosaurini, there is further ventral displacement of the dentary tooth row . In this subclade, the coronoid process is no longer on the same plane as the jaw joint, but is ventrally displaced. In addition, the angular continues to rise dorsally posterior to the coronoid process. The isolated mandible SMNS 82043 shows that D. maximus also has this characteristic mandibular shape. Dakosaurus andiniensis is unique in having a greatly expanded coronoid process (see Figure 2 in Pol & Gasparini ).
In the neotype only the dentary is well-preserved, but not at its articulation with the surangular and angular (Fig. 2). However, in SMNS 82043 the sutures between the dentary and both elements are easily identified (Fig. 6; although some of the original surface texture has been eroded). The dentary is heavily pitted, especially at the anterior end. Along the dorsal margin of the dentary there is no evidence of festooning. The ventral margin is also straight, except for its anteriormost part where the margin rises anterodorsally, although not as sharply as in D. andiniensis , .
The symphysis is very short in this species. The neotype and only specimen which has the symphyseal articulation facet preserved, has only four dentary teeth adjacent (Fig. 3). This is in marked contrast to other geosaurins, Geosaurus has at most eight, while Plesiosuchus has nine (Table 1). This results in only one third of the dentary teeth being adjacent to the symphysis in D. maximus, whereas in other geosaurins it ranges from 61–71% (Table 1).
Angular and surangular.
The angular and surangular are strongly sutured along their entire border, with the angular forming the ventral half of the posterior mandible and the surangular the dorsal half (Fig. 6). The angular ventral margin is gently concave, curving dorsally towards the jaw joint. The angular terminates significantly higher than the dentary tooth row. As with the angular the surangular gentle curves dorsally, and possesses a well-developed coronoid process. The dentary–surangular suture projects anteroventrally. As the medial side of the mandible is not exposed, it was not possible to verify the actual extension of the medial ramus of the surangular.
Dentition: tooth morphology.
The most commonly discovered elements of Dakosaurus maximus are isolated tooth crowns (e.g., Fig. 8). These can be identified as belonging to D. maximus because the in situ teeth of the neotype and referred specimens have distinctive, autapomorphic morphologies (e.g. SMNS 8203, Fig. 4; SMNS 10819a, Fig. 5; SMNS 82043, Fig. 6). Each tooth shows a caniniform morphology: they are single cusped and mediolaterally compressed. No constriction is present at the crown/root junction, but the boundary is evident through colour and texture. The crowns are curved lingually, but do not curve throughout, only at the middle and apical sections. The basal sections are wider labiolingually, creating a more sub-circular to slightly ovoid cross-section. The teeth lack the distinctive apicobasal faceting observed on the labial surface of contemporaneous Geosaurus species , . The crowns are robust and large in comparison to the teeth of other thalattosuchians (e.g. Steneosaurus leedsi: NHMUK PV R3806; Metriorhynchus superciliosus: GLAHM V1141; “Metriorhynchus” brachyrhynchus: NHMUK PV R3804) . Cingula and accessory cusps are absent, as in all thalattosuchians (e.g. Steneosaurus leedsi: NHMUK PV R3806; Metriorhynchus superciliosus: GLAHM V1141; “Metriorhynchus” brachyrhynchus: NHMUK PV R3804) , ). Based on the neotype, this species has a dental formula per ramus of three premaxillary, 13 maxillary and 12 dentary teeth. This tooth count is very slightly lower than that of other Geosaurini genera, which have 14 maxillary and 13 dentary teeth (see Table 1). Dakosaurus andiniensis has a slightly shorter tooth row than D. maximus (10/11 maxillary teeth and 12 dentary teeth), giving it the shortest tooth row of any thalattosuchian. Most mesorostrine/longirostrine thalattosuchians have an upper or lower jaw tooth count of between 24 and 45 teeth , , .
Dentition: ornamentation and carinae.
Surface ornamentation is light, composed of microscopic ridges in an arranged an anastomosed pattern, creating a fabric of crests over the surface . Given the small size of these ridges, the overall appearance of the tooth surface is reasonably smooth. This morphology is similar to that observed in Geosaurus giganteus , .
The teeth have carinae comprised of both denticles and a keel, as in true ziphodont teeth . The carinae are well-defined, extending from the base to apex of the crown on both the mesial and distal margins. Denticles extend contiguously along the entire length of the preserved carinae. Overall, the denticles have a fairly consistent height (isometric), but their shape varies (poorly isomorphic, rounded and never rectangular or square). The individual denticles of NHMUK PV OR35766 are large, with maximum measurements of 425 µm × 330 µm × 675 µm (apicobasal length, height, and transverse width respectively); these dimensions are reasonably similar to those of D. andiniensis (see Table 2 in Andrade et al. ). The profile of the denticles is rounded in lingual view, but the serrations bear a sharp cutting edge (the keel) on the distal and mesial margins. This morphology is also observed in other members of Geosaurini , , . Metriorhynchines lack any carinal serrations, whereas basal geosaurines (i.e. those not in the subclade Geosaurini) possess incipient microdenticles that do not proceed contiguously along the entire carina .
Dentition: wear and occlusion.
The macroscopic and microscopic wear of Dakosaurus maximus teeth were described in detail by Young et al. . In summary, isolated (NHMUK and SMNS specimens) and in-situ (SMNS 8203, Figs. 2, 3, 4; SMNS 10819a, Fig. 5; and SMNS 82043, Fig. 6) D. maximus teeth, of different size and position, exhibit three distinct types of macroscopic wear features. The first is spalled enamel near the apex; second, occlusal wear along the mesial and distal margins (i.e. along the carinae) and third, a wear facet at the base of the crown which is semi-circular.
At the apex, enamel spalling is frequently observed. It can be present on either the labial or lingual surface, and can be extensive (e.g. SMNS 9808; Fig. 8A). The spalled surface begins at the crown apex and proceeds basally, generally forming an ovoid or triangular facet. The teeth of tyrannosaurid dinosaurs, which are reminiscent in size and shape to those of Dakosaurus, also exhibit enamel spalling that is interpreted as tooth-food abrasion . Interestingly, extreme spalling and complete tooth breakage patterns are observed in extant aquatic amniotes, in particular the killer whale Orcinus orca , . This pattern spalling and crown breakage is observed in killer whale populations that are associated with the consumption of large prey items (macrophagy), specifically predation of sharks .
The second type of macroscopic wear proceeds along the edges of the mesial and distal surfaces of the teeth (Fig. 8) . The mesial/distal macrowear extends from the apex and terminates at a variable distance towards the base, and in some isolated crowns the wear can extend along the entire length of the carinae (SMNS 9808, Fig. 8A). Interestingly, this type of wear obliterates the carina (keel and denticles). Similar wear facets, which as in Dakosaurus are elongated, elliptical, and follow the long axis of the tooth, have been observed in tyrannosaurid dinosaurs and interpreted as representing tooth-on-tooth attritional wear . Young et al.  hypothesized that these facets in were formed as a result of tooth-on-tooth occlusion, namely that during occlusion the upper and lower jaw teeth would have met each other mesiodistally with carinae-to-carinae contact (i.e. the teeth would have fit in between each other when the jaws closed; much like extant false killer whales Pseudorca crassidens ). Examination of these carinal wear facets under scanning electron microscopy reveals the presence of striations that are regularly oriented, large, and restricted to the wear facet itself . Similar striations are also present on the elliptical wear facets of tyrannosaurid teeth, as well as those regions on the teeth of lions that make contact with the teeth of the opposing tooth row during shearing .
The hypothesis that the teeth of the upper and lower jaws contacted one another mesiodistally along their carinae during occlusion is supported by the arrangement of the teeth. The complete and articulated skull and mandible of Dakosaurus andiniensis exhibits in situ vertically oriented tooth crowns which are closely packed (see Fig. 1) , . As of yet, there is no complete Dakosaurus maximus cranial material comparable to that of the well-preserved skull of D. andiniensis, which prevents direct observation of occlusion in this species. However, the presence of reception pits on the premaxilla, maxilla and dentary (SMNS 8203, Fig. 4A; SMNS 10819a, Fig. 5A; and SMNS 82043, Fig. 6C, 6D) indicates that the teeth were indeed tightly packed, oriented vertically, and would have repeatedly contacted the opposing jaw bone during occlusion .
Plesiosuchus Owen, 1884 .
Steneosaurus manselii Hulke, 1870  (following Recommendation 67B of the ICZN Code).
“Near crocodile”. Plesios (πλεσιος) Greek for near/close to, while suchus (συχος) means ‘crocodile’, and is the Latinised form of the Ancient Greek for an Egyptian species (according to Owen ). Owen  considered Plesiosuchus to be nearer to, morphologically, extant crocodylians than Steneosaurus; hence the name.
Upper Kimmeridgian to lower Tithonian.
England, and possibly also Spain .
Same as the only known species.
v 1869 Pliosaurus trochanterius (Owen) – Owen, p.7, pl. 3 
v 1867–69 Metriorhynchus (von Meyer) – Eudes-Deslongchamps, p. 329 
v 1869 Steneosaurus rostro-minor (Geoffroy Saint-Hilaire) – Hulke, p. 390, pl. 17–18 
v* 1870 Steneosaurus manselii sp. nov. – Hulke, p. 167, pl. 9 
v 1885 Metriorhynchus sp. (von Meyer) – Woodward, p. 502 
v 1885 Dakosaurus manselii (Hulke) comb. nov. – Woodward, p. 503 
v 1888 Dacosaurus maximus (Plieninger) – Lydekker, p. 93 (sic) 
v 1888 Machimosaurus mosae (Sauvage & Lienard) – Lydekker, p. 104 
v 1890 Machimosaurus mosae (Sauvage & Lienard) – Lydekker, p. 286 
v 1973 Dakosaurus mansellii (Hulke) – Steel, p. 42 (sic) 
v 1996 Dakosaurus manseli (Hulke) – Grange & Benton, p. 509 
v 2009 Dakosaurus manselii (Hulke) – Young & Andrade, p. 560 
v 2010 Dakosaurus manselii (Hulke) – Young et al., p. 819 
NHMUK PV OR40103– incomplete skull (snout and occiput – lacking occipital condyle – with fragments of the supratemporal arches) and isolated right articular. NHMUK PV OR40103a – the right mandibular ramus, some isolated teeth, a humerus, and numerous ribs and vertebrae that are partially or completely imbedded in matrix. Two further specimens may belong to the P. manselii holotype: NHMUK PV OR40104– an occipital condyle, and NHMUK PV OR40105– carpal and tarsal bones. Both specimens were donated to the University of Toronto through Professor Ramsay Wright in 1900. From examining the relevant register in the NHMUK Earth Sciences Department, it is possible both specimens were part of NHMUK PV OR40103 (as they are all part of the same acquisition, NHMUK PV OR40103 lacks the occipital condyle and NHMUK PV OR40103a does not include carpal or tarsal bones). Unfortunately, as neither specimen could be located at the Royal Ontario Museum (K. Seymour, 2011 pers. com.) it is impossible to assess whether they too belong to the holotype.
“Mansel’s near crocodile”. Named after its discoverer, JC Mansel-Pleydell.
Type locality and horizon.
Kimmeridge Bay, Dorset, England. Lower Kimmeridge Clay Formation. Aulacostephanus autissiodorensis Sub-Boreal ammonite Zone, upper Kimmeridgian, Upper Jurassic.
NHMUK PV R1089: incomplete skull (braincase with part of the supratemporal arches) and mandible. Kimmeridge, Dorset, England. Upper Kimmeridge Clay Formation. Pectinatites wheatleyensis Sub-Boreal ammonite Zone, lower Tithonian, Upper Jurassic (S. Etches 2011 pers. com.). Two further specimens (K181: isolated teeth, partial maxilla?, partial left mandible, ribs, vertebrae, femur, and K434: right dentary) in the Museum of Jurassic Marine Life (Kimmeridge, England; the Etches Collection is in the process of becoming a museum) are referable to Plesiosuchus manselii. The isolated Spanish tooth crown described by Ruiz-Omeñaca et al.  as Dakosaurus sp. shares the same enamel ornamentation pattern, denticles size and lack of wear observed on the teeth of the holotype (MUJA-1004, now referred to cf. Plesiosuchus manselii, see below).
The specimen NHMUK PV OR40103b, a short series of cervicodorsal vertebrae preserved in matrix, is clearly a thalattosuchian due to its possession of several apomorphies of the group (amphicoelous centra, well developed diapophyseal and parapophyseal processes, no hypapophyses). It does not, however, belong to the same individual as NHMUK PV OR40103/NHMUK PV OR40103a. The vertebrae are much smaller than those of NHMUK PV OR40103a, and the matrix is of a different composition. As such, it is unclear whether NHMUK PV OR40103b belongs to Plesiosuchus or another metriorhynchid, and it is here considered Thalattosuchia indeterminate.
Metriorhynchid crocodylomorph with the following unique combination of characters (autapomorphic characters are indicated by an asterisk): large robust teeth, with moderate to strong mediolateral compression; carinae formed by a keel and true microscopic denticles (microziphodonty, dimensions do not exceed 30 0µm); denticles are rectangular-shaped in lingual view*; tooth enamel ornamentation is largely inconspicuous, but there are apicobasally aligned ridges of low-relief*; the mesial margin of some teeth have a pronounced distal curvature*; separation between premaxilla and nasal approximately subequal to the midline length of the premaxilla; in dorsal view, the lateral margins of the prefrontals have an inflexion point directed posteriorly at an angle of approximately 70 degrees from the anteroposterior axis of the skull; palatines are strongly convex with a pronounced ridge along the midline*; in palatal view, the palatine width narrows anteriorly from the suborbital fenestrae to the midline (a distinct elongate triangular shape)*; the maxillopalatine suture midline terminus is level to the fourth maxillary alveolus*; quadrate distal articular surface is not separated into two condyles by a sulcus, and has only a very shallow depression at the centre*; mandibular symphysis long (9 out of 13 dentary teeth are adjacent to the symphysis).
As discussed above, this species has a long and complicated taxonomic history, and it has been referred to both its own genus (Plesiosuchus) and to Dakosaurus. Our phylogenetic analysis, which is reported below, does not find compelling evidence for a monophyletic Dakosaurus clade including both D./P. manselii and the Dakosaurus type species, D. maximus. Therefore, we resurrect the genus name Plesiosuchus and refer to this species as P. manselii from here onwards in this monograph.
Ontogenetic stage and body length estimate.
None of the vertebrae in NHMUK PV OR40103a are well enough preserved to determine the nature of the neurocentral sutures. Amongst crocodylomorphs the fusion of the neurocentral sutures proceeds from the caudal to the cervical vertebrae during ontogeny, with fusion of the cervicals occurring in morphologically mature specimens , . This caudal-cervical fusion pattern has been confirmed as occurring in thalattosuchians , . Therefore, it is uncertain whether the holotype and referred specimens belong to adults or subadults. Using the body estimation method outlined by Young et al. , NHMUK PV OR40103 would have been approximately 5.42 m in total length (based upon the above 100 cm basicranial length estimate). While it is difficult to estimate the length of the skull due to the non-continuous nature of the rostrum and occiput pieces, the snout length is 58 cm long. The mandible is approximately 111 cm in total length.
The mandible of NHMUK PV R1089 is 132.2 cm in length. Using the ratio of basicranial length to mandibular length in “Metriorhynchus” brachyrhynchus NHMUK PV R3804 (as we did for SMNS 82043, see above), NHMUK PV R1089 is estimated as having a basicranial length of 125.5 cm. This gives a total body length estimate of 6.83 m, using the Young et al.  equations. This is greater than the body length given reported by Young et al. , however that estimate was based on material we now know is NHMUK PV OR40103 and NHMUK PV R1089. Prior to this study there was confusion surrounding which mandible went with which occiput (due to NHMUK PV R1089 not being labelled). The earlier body length estimate of 5.97 m  can be disregarded as an error. This means the body length of Plesiosuchus manselii likely falls within the size range of the top predator of the Oxford Clay Sea, the pliosaur Liopleurodon ferox. An adult specimen of L. ferox with a cranial length of ∼126 cm has been estimated to have a total body length of 6.39 m , although the largest known L. ferox skull has a length of 154 cm (NHMUK PV R3536).
Description and Comparisons
Skull: general comments.
Unfortunately there are no complete or nearly-complete skulls of this species. As such, few bones are known, but the rostrum, braincase, and mandible are present (Figs. 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22,23).
The surface ornamentation is composed of elliptical pits (Figs. 9, 10,11), rather than the subpolygonal pits and deep grooves usually seen in neosuchians, peirosaurids and Araripesuchus –, or the irregular pattern of shallow sulci found in most notosuchians , . The pits found in Plesiosuchus manselii are similar to those observed in Geosaurus giganteus: faintly indistinct, loosely packed and much shallower than those observed on extant crocodylians. Elliptical pits can be identified on the premaxilla of P. manselii (Fig. 11), but due to the poor preservation we cannot evaluate the extent of the development of this ornamentation in other elements. However, the pitted pattern is absent from the nasal, as in several metriorhynchids (e.g. Geosaurus giganteus ). This is in contrast to the ornamented pattern observed in D. maximus, in which many elements have large elliptical pits, and the maxillae also had elongate grooves and ridges (compare Fig. 11 to Figs. 2, 7).
Frontal, prefrontal, lacrimal and jugal.
Due to the poor state of preservation in NHMUK PV OR40103 we cannot differentiate these elements from the nasals and maxillae (Figs. 9, 11). It is highly likely that parts of these elements are preserved in the holotype, but the sutures cannot be determined. Near to the orbital region there are numerous cracks and breaks, repaired with different adhesives and fillers at various times in the history of the specimen, and this region of the skull has the poorest state of preservation (Fig. 11). This means we cannot differentiate cracks in the fossil from genuine sutures in the region were we expect the frontals, prefrontals, lacrimals and jugals to articulate with the nasals and maxillae. The only sutures which can be verifiably identified on the dorsal surface of the snout are the premaxillary-maxilla suture and the maxillary-nasal suture. The left prefrontal in NHMUK PV OR40103 is better preserved than the right (Figs. 9, 10). Although its sutures to other elements cannot be determined, it does have the characteristic metriorhynchid enlarged, expanded dorsal surface which laterally overhangs the orbit.
Premaxilla and external nares.
The premaxilla bears three alveoli per ramus (Fig. 12). The ornamentation on the external surface of premaxilla is composed of faint, indistinct elliptical pits, and the bone is slightly convex (NHMUK PV OR40103; Fig. 11). The premaxillae completely enclose the external nares. Along the posterior margin of the premaxilla, the posterodorsal process contacts the anterior margin of the maxilla. The suture is hard to distinguish, but it seems likely that P. manselii too shared the broad ‘U’-shape of D. maximus and D. andiniensis in dorsal view. Contra Hulke  and Owen  there is no premaxilla-nasal contact (as previously noted by Fraas ). Instead, the intervening maxilla prevents this contact, as is normal for most thalattosuchians (the only known exceptions are Cricosaurus macrospondylus  and two specimens of “Metriorhynchus” brachyrhynchus NHMUK PV R3700 and NHMUK PV R4763). In palatal view the premaxillary shelves suture along the midline (Fig. 12). Plesiosuchus manselii shares the single anterodorsally orientated naris morphology observed in most metriorhynchids (including D. maximus).
The maxillae of Plesiosuchus manselii are long, low and narrow (rostrum height: length of ∼0.13) (Fig. 11), lacking the deeper proportions observed  in D. maximus (rostrum height: length of 0.15) and D. andiniensis (rostrum height: length of 0.36). The maxillae bear 14 alveoli (NHMUK PV OR40103). Like the premaxillae, the external surfaces of the maxillae are slightly convex. The maxillary ornamentation is noticeably different from that observed in Dakosaurus maximus. Here the lateral and dorsal surfaces of the maxilla is covered in grooves and raised ridges orientated to the long axis of the skull. Both the grooves and ridges are shallower than those of D. maximus. No elliptical pits were observed on the maxillae. As with Geosaurus giganteus (NHMUK PV R1229, NHMUK PV OR27020), there are few neurovascular foramina, positioned dorsally to the alveolar margin (Fig. 11).
Along the dorsal midline the left and right maxillae contact each other across a long suture, which terminates posteriorly at the anterior margin of the nasal. The maxillonasal suture begins at the skull midline and forms an anteriorly pointed ‘V’-shape. With the jugals and lacrimals poorly preserved, the nature of their contact with the maxilla cannot be determined. Similarly, the contribution the maxilla made to the preorbital fossa is unknown. In palatal view, the maxillae suture along the midline to form part of the secondary palate (Fig. 12). Posteriorly and posterolaterally the maxillae contact the palatines. In addition the maxillae form the lateral border of the suborbital fenestrae.
The nasals are large paired, unfused elements (Figs. 9, 10, 11). In dorsal view they are subtriangular in shape and broad. Along the midline the dorsal surfaces of the nasals are deeply trenched, with a steep longitudinal depression. The anterior margin forms an acute angle along its border with the maxilla. The external surfaces of the nasals are well ornamented, with a grooved pattern.
The nasal dorsoposterior processes cannot be distinguished from the frontal or prefrontals. The lateroposterior process would have curved ventrally to the lateral expansion of the prefrontal, contacting the lacrimal and descending process of the prefrontal. This process would have contributed to the preorbital fossa. However, once again the sutures are indistinct.
The left squamosal of the holotype (NHMUK PV OR40103; Fig. 13) is the best preserved squamosal of any known specimen of P. manselii; conversely, both squamosals are present but are incompletely preserved in NHMUK PV R1089 (Figs. 14, 15). The squamosals form the posterolateral border of the supratemporal fossae and the posterior half of the supratemporal arches (i.e. the bar that separates the supratemporal fenestra from the infratemporal fenestra; Figs. 13, 14). Only the left squamosal of NHMUK PV OR40103 preserves the anterior process (Fig. 13). Unfortunately, the squamosal-postorbital suture could not be determined. Along the posteromedial edge (medial process), the squamosal contacts the parietal. Again, the squamosal-parietal suture cannot be determined. The squamosal-parietal bar borders the posterior margin of the supratemporal fossae. The medial process is orientated slightly posterolaterally, and is narrowly exposed on the occipital surface of the skull. The medial and lateral processes of the squamosal meet to form the posterolateral corner of the supratemporal fossa.
Only the left postorbital of NHMUK PV OR40103 is preserved (Fig. 9). Unfortunately it is incomplete. The frontal process and the postorbital bar ( = descending process) are not preserved, while the squamosal process cannot be distinguished from the squamosal itself (i.e. their suture is not clear). The squamosal process of the postorbital forms the anterior part of the supratemporal arch.
The parietal forms the posterior and medial margin of the supratemporal fenestrae and fossae in dorsal view, and together with the frontal constitutes the intertemporal bar ( = frontoparietal bar) that separates the right and left supratemporal fossae on the dorsal skull midline (Figs. 9, 13, 14). The bar is only completely preserved in NHMUK PV R1089 (Fig. 14); however the suture between the frontal and parietal cannot be determined. The parietal has two lateral processes that contact the squamosals, but the sutures between these bones are difficult to observe. In occipital view, the ventral margins of the parietals contact the supraoccipital. In lateral view (within the supratemporal fenestra), the parietal overlays both the laterosphenoids and the proötics.
In all other thalattosuchians (e.g. Steneosaurus leedsi NHMUK PV R3320, Steneosaurus edwardsi NHMUK PV R3701, “Steneosaurus” obtusidens NHMUK PV R3169, Metriorhynchus superciliosus NHMUK PV R2030, Gracilineustes leedsi NHMUK PV R3540, “Metriorhynchus” brachyrhynchus NHMUK PV R3804; Dakosaurus maximus CAMSM J29419) ,  the distal articular surface of the quadrate has medial and lateral convex condyles that are separated by a shallow sulcus which is directed ventromedially. When seen in distal (ventral) view the two protuberances can be clearly distinguished. In Geosaurus grandis (BSPG AS-VI-1) the sulcus is more strongly concave and considerably wider, and therefore the two condyles are particularly discrete. However, when NHMUK PV OR40103 and NHMUK PV R1089 are observed in distal view the posterior margin of the quadrate distal articular region is a continuous convex curve with no evident lateral or medial protuberance (Figs. 13B, 14B, 15). On both specimens (NHMUK PV OR40103 and NHMUK PV R1089) the sulcus is only a very shallow depression, and it does not clearly separate the distal head into two distinct condyles.
Laterosphenoid and Proötic.
The laterosphenoid and proötic are preserved within the supratemporal fenestrae of NHMUK PV R1089. Unfortunately, the sutures between these elements and the parietal and quadrates are difficult to determine. Following Fernández et al.  the laterosphenoid would have formed the anterior margin of the trigeminal fenestra, the quadrate the ventral and posterior margin, and the proötic forming part of the dorsal margin. The trigeminal fossa is developed mainly posterior to the trigeminal foramen (a metriorhynchid apomorphy ).
The supraoccipital is exposed on the occipital surface of the skull and its external surface is slightly concave (Figs. 13, 14, 16). The supraoccipital contacts the parietal dorsally and the exoccipital laterally. The supraoccipital participates in the dorsal margin of the foramen magnum in NHMUK PV OR40103 (Fig. 13), much like “Metriorhynchus” westermanni ,  and Dakosaurus andiniensis. Although both Gasparini et al.  and Pol & Gasparini  figure the supraoccipital as not participating in the foramen magnum margin in D. andiniensis; the supraoccipital of this taxon (Figure 9A of Pol & Gasparini ) has a very similar morphology to NHMUK PV OR40103, and the unmarked line ventral to their provisional supraoccipital border in the interpretative drawing of (Pol & Gasparini : Fig. 9B), is what we interpret as being the supraoccipital suture. The supraoccipital does not contribute to the foramen magnum in “Metriorhynchus” brachyrhynchus (NHMUK PV R2618) “Metriorhynchus” cf. durobrivensis , Metriorhynchus superciliosus (AMNH FR997; ), Metriorhynchus cf. palpebrosus  and Cricosaurus schroederi . In NHMUK PV R1089 the supraoccipital is missing, but the depression for this bone clearly shows it would have participated in the dorsal margin of the foramen magnum.
The right portion of the exoccipital is not preserved in the holotype and has been reconstructed with plaster (Fig. 13). Medially, the exoccipital contacts the supraoccipital and dorsally/laterodorsally, the squamosals. Ventrally/ventromedially, the exoccipital would have contacted the basioccipital. However, due to poor preservation and/or fusion, these sutures are unclear. The exoccipital forms a large portion of the occipital surface of the skull. Dorsal to the paroccipital processes, the posterior surface is slightly convex. The left (and only preserved) paroccipital process of the holotype is poorly preserved. In NHMUK PV R1089 the paroccipital processes are large and pronounced (Figs. 14, 16). Although in both NHMUK PV OR40103 and NHMUK PV R1089 the paroccipital processes are incomplete and poorly preserved, it is clear that they are orientated dorsally (Figs. 13, 14, 16). The exoccipital forms the lateral and ventral margins of the foramen magnum. Ventrolateral to the occipital condyle there are two large foramina (for the internal carotid arteries).
As with other metriorhynchids , , the occipital condyle of NHMUK PV R1089 is largely formed by the basioccipital, while the exoccipitals contribute to the dorsal margin (Fig. 16). In the Oxford Clay metriorhynchids (Metriorhynchus superciliosus NHMUK PV R6859, NHMUK PV R6860; Gracilineustes leedsi NHMUK PV R3014, NHMUK PV R3015; “Metriorhynchus” brachyrhynchus NHMUK PV R3804) the exoccipital contributes only to the lateral sections of the dorsal margin, leaving a gap between them formed solely by the basioccipital. However, in NHMUK PV R1089 the exoccipital covers the entire dorsal margin of the occipital condyle.
The basioccipital forms the ventromedial part of the occipital region of the skull (Figs. 13, 14, 15, 16). The sutures between the basioccipital and exoccipital are largely unclear. Two processes project ventrolaterally, forming the basal tubera. Medially, between the basal tubera, there is a deep fossa. Within this fossa is the Eustachian foramen ( = part of the median pharyngeal system) .
The palatines are exposed on the palatal surface of the skull where they are sutured along the skull midline, much like the palatal shelves of the premaxillae and maxillae (Fig. 12). Together these three pairs of bones form the secondary palate. Anteriorly and anterolaterally the palatines met the palatal branches of the maxillae. In palatal view, the maxillopalatine suture of NHMUK PV OR40103 has a distinct ‘V’-shape, proceeding anteriorly from the suborbital fenestrae to the skull midline (Fig. 12A). This differs from that observed in other geosaurines, as in those species the maxillopalatine suture is approximately parallel to the maxillary tooth row from the suborbital fenestra until both lateral margins are united by a gentle convex curve, e.g. “Dakosaurus” sp. in Buchy et al. ; “Metriorhynchus” brachyrhynchus (see text-Fig. 58 in Andrews ; NHMUK PV R3804, NHMUK PV R3700); in Torvoneustes carpenteri BRSMG Cd7203 the palatine is missing, but the suture on the maxilla for the palatine is preserved, and it too follows this usual morphology , ). In metriorhynchines the maxillopalatine sutural contact is very different in form; these taxa have two non-midline anterior processes (i.e. one on either side of the midline; Fig. 24). In Metriorhynchus superciliosus (e.g. GLAHM V1009, SMNS 10115, SMNS 10116) the two anterior processes are separate from both the mid-line and the maxillary alveolar border; however in Gracilineustes leedsi (NHMUK PV R3540) the lateral margins of these process merge with the maxillary alveolar border (Fig. 24).
Snout in ventral (palatal) view, (A) photograph and (B) line drawing (thin grey lines represent breaks). Abbreviations: al, alveolus; max, maxilla; pal, palatine; ptg, pterygoid.
The single midline anterior process of the palatine observed in geosaurines appears to be the basal condition within Thalattosuchia, as teleosaurids  and basal metriorhynchoids such as Teleidosaurus calvadosii (NHMUK PV R2681)  share this morphology. As such, the presence of two non-midline anterior processes in Metriorhynchinae is an autapomorphy of that clade.
In addition to having a unique shape of maxillopalatine suture within Metriorhynchidae, in NHMUK PV OR40103 the anterior extent of the palatine is also unique. In this specimen, the palatine extends anteriorly along the midline so that it is level to the fifth maxillary alveolus. In no other known metriorhynchid does the palatine extend that far anteriorly (Table 1). Furthermore, the shape of the palatine is unique in NHMUK PV OR40103. In all other taxa where the three-dimensional shape of the palatine is preserved, the palatal surface is gently convex (e.g. “Dakosaurus” sp. in Buchy et al. ; “Metriorhynchus” brachyrhynchus NHMUK PV R3804; Cricosaurus araucanensis in Gasparini & Dellapé ; Metriorhynchus superciliosus GLAHM V1009). However, in NHMUK PV OR40103 the palatal surface of the palatine is strongly convex (Figs. 11, 12), with a pronounced ridge along the skull midline (i.e. where the palatines suture). We must note however, that the natural shape of the palatines is rarely preserved in metriorhynchids (most likely caused by dorsoventral compression of the skull distorting these elements). As such, the variability of palatine convexity is currently unknown.
Fenestrae and fossae.
The exits for the post-temporal openings on the occipital surface of the skull cannot be determined for either NHMUK PV OR40103 or NHMUK PV R1089, due to poor preservation. However, the exits for the post-temporal openings on the posterior wall of the supratemporal fenestra are very large in NHMUK PV R1089, as they are: 1) larger than the fenestra and fossa for the trigeminal nerve, and 2) wider in mediolateral width than the foramen magnum. Interestingly, the post-temporal opening in other metriorhynchids is either reduced or absent , . Fernández et al. (:373) state that the: “Obliteration or reduction of the post-temporal foramen can be variable within species, such as Cricosaurus araucanensis (MLP 72-IV-7-1; 71-IV-7-2; 71-IV-7-4)”. However, in no other known thalattosuchian species are the post-temporal openings wider than, or as wide as, the foramen magnum.
Other fenestrae are not preserved. As stated above, most thalattosuchians either lack or have a highly reduced naso-oral fenestra, and metriorhynchids lack external mandibular fenestrae. Neither the preorbital fossae, infratemporal fenestrae nor the lacrimal-prefrontal fossae are preserved.
Mandible: general comments.
The mandibles of NHMUK PV OR40103a and NHMUK PV R1089 are better preserved than the mandibles of D. maximus (Figs. 17, 18, 19, 20, 21). The mandibles of NHMUK PV OR40103a have become separated, with the right ramus better preserved (Figs. 17, 18). The mandible of NHMUK PV R1089 has thirteen alveoli (contra Owen  and Lydekker  who stated 14; Lydekker  originally considered there to be 13 alveoli, but later  considered the anterior end to be missing and with it two alveoli), with nine teeth adjacent to the mandibular symphysis (Fig. 21). It has been subjected to post-mortem dorsoventral compression, with the dentary tooth row flattened such that it is no longer its natural shape (with the three anterior-most alveoli suffering the worse of the compression). The posterior halves of both rami are broken off (consisting of the articular, prearticular, and most of the surangular and angular; see Figs. 19, 20). Both specimens preserved the surangulodentary groove on the lateral surface of dentary and surangular. The groove is deeply excavated, and there is no evidence of a large foramen at the dentary terminus (unlike D. maximus and D. andiniensis). No external mandibular fenestra is evident.
In NHMUK PV OR40103a the sutures between the dentary and the surangular and angular are difficult to determine, because disarticulated ribs lie over the region where these bones meet, and because of the poor preservation of the posterior end of the dentary (Figs. 17, 18). However, in NHMUK PV R1089 the sutures between the dentary and both the surangular and angular are easily identified (Figs. 19, 20). The lateral surfaces of the dentaries are gently convex in NHMUK PV OR40103a, while in NHMUK PV R1089 the dorsoventral compression has resulted in the dentaries losing their natural shape. The lateral surface of the dentary is pitted, especially at the anterior end, although not as strongly as D. maximus. The dorsal margin of the dentary is straight. The ventral margin is also straight, except for its anteriormost part where the margin gently curves anterodorsally. The dentary alveoli are very large, closely set together and almost circular (NHMUK PV R1089; Fig. 21).
Along the midline, the dentaries contact to form most of the mandibular symphysis (Figs. 17, 21). The splenials contact the dentaries across a length of approximately 60% of the symphyseal midline. They form a wide ‘V’-shaped suture pointed anteriorly in dorsal view. The dentaries continue to contact the splenial ventrally. This suture rises dorsally on the medial surface of the mandible, coming close to the dentary tooth-row, until the coronoid overlies the contact between both elements.
The dentary interalveolar spaces of NHMUK PV R1089 are all very small, being less than a quarter of the length of the immediate alveoli and typically far shorter (Fig. 21). In other genera within Geosaurini this pattern of extreme reduction in interalveolar spaces is also present (Dakosaurus maximus Figs. 2, 3; Torvoneustes carpenteri ), in particular in the region of the symphyseal dentary alveoli. This pattern is also observed in the holotype of the Middle Jurassic geosaurine metriorhynchid Suchodus durobrivensis . The enlargement of alveolar diameter, coupled with a reduced alveoli count, in Suchodus durobrivensis (NHMUK PV R1994) and Geosaurini results in the loss of the thalattosuchian dentary ‘diastema’ (the large distance between dentary alveoli 4 and 5). What is curious is that this ‘diastema’ is still present in other thalattosuchian clades that have reduced tooth-rows, such as in the brevirostrine teleosaurid Machimosaurus mosae . Furthermore, the longirostrine polydont (30+ alveoli) metriorhynchine metriorhynchid Gracilineustes leedsi (NHMUK PV R2042) has very small dentary interalveolar spaces but the ‘diastema’ is still present.
The splenials suture together along the mandible midline to form part of the mandibular symphysis (Figs. 17, 21). In medial view, the splenials cover most of the surface ventral to the coronoids (NHMUK PV R1089; Fig. 21). The medial surface of the splenial can be seen on the right ramus of NHMUK PV OR40103a (Fig. 17). As with other metriorhynchids  the splenial begins to thin posteriorly, terminating approximately level to the coronoid process. The dentary-splenial suture rises dorsally on the medial surface of the mandible, coming close to the dentary tooth-row, until the coronoid overlies the contact between both elements.
Angular and surangular.
The angular and surangular are strongly sutured along their entire border, with the angular forming the ventral half of the posterior mandible and the surangular forming the dorsal half (NHMUK PV OR40103a, NHMUK PV R1089; Figs. 17, 18, 19, 20). The angular ventral margin is gently concave, curving dorsally towards the jaw joint. The angular terminates significantly higher than the dentary tooth row. As with the angular the surangular gently curves dorsally, and possesses a well-developed coronoid process.
Only the left coronoid of NHMUK PV R0189 is preserved (Fig. 21). It is a thin, elongate bone that overlies the surangular, dentary and splenial along the dorsomedial surface of the mandible. Posteriorly it forms the medial surface of the coronoid process, and then it proceeds anteriorly along the dorsomedial surface overlying the surangular and splenial. It continues anteriorly until it is level with the last dentary alveolus.
Both of the prearticulars are present on NHMUK PV R1089 (Figs. 19, 20). The prearticular is a small bone, exposed on the medial surface of the mandible. They are bound laterally and ventrally by the surangular and angular, and dorsally by the articular. The prearticulars are posterior to both the splenials and coronoids, but do not contact either. They are orientated posterodorsally in medial view.
The articulars are preserved in both NHMUK PV OR40103a (Fig. 18) and NHMUK PV R1089 (Figs. 19, 20), although their morphology cannot be viewed in the former. The articular is exposed dorsally and medially, forming the posterior-most portion of the mandible, including the mandibular component of the jaw joint and the retroarticular process. Medially the articular contacts the angular and prearticular, anteriorly it contacts the surangular, posteriorly it contacts the angular, and laterally both the surangular and angular. The articular surface for the reception of the quadrate (glenoid fossa) is very different from that of other metriorhynchids. In basal metriorhynchids from the Oxford Clay Formation (e.g. Metriorhynchus superciliosus) the articular surface has two shallow concavities separated by a low oblique ridge . This ridge-and-cavity morphology corresponds to the sulcus-and-condyle morphology of the quadrate condyles in these taxa. In NHMUK PV R1089 (with the right articular being better preserved) no ridge is visible, nor are there two concavities. There is instead a single, deep concavity orientated slightly anteromedially. This matches the modified quadrate distal articular surface. Separating the glenoid fossa and the dorsal surface of the retroarticular process is a high raised ridge that is orientated medially. The dorsal surface of the retroarticular process is concave and triangular in shape. The medially margin is almost straight, but is orientated slightly posterolaterally. The lateral margin is strongly orientated posteromedially.
Dentition: tooth morphology.
The dentition of Plesiosuchus manselii is almost identical to that of D. maximus. Each tooth shows a caniniform morphology, as they are single cusped and mediolaterally compressed (Figs. 17, 18, 22, 23). No constriction is present at the crown/root junction, but the boundary is evident through colour and texture. The basal sections are wider mediolaterally, creating a more circular to slightly ovoid cross-section. The teeth lack the distinctive apicobasal faceting observed on the labial surface of contemporaneous Geosaurus species , . The crowns are robust and large, and cingula and accessory cusps are absent. Based on the holotype and NHMUK PV R1089, this species has a dental formula per ramus of: three premaxillary, 14 maxillary and 13 dentary teeth.
Dentition: ornamentation, carinae and wear.
The enamel surface ornamentation is composed of numerous apicobasally aligned ridges, which are fairly well-packed but are of low-relief (Figs. 18, 22, 23). This makes them difficult to properly observe without either optical aids, or good lighting. The ornamentation differs considerably from the densely packed and high ridges observed in Torvoneustes and Metriorhynchus , , and the light, anastomosed pattern observed in D. maximus and Geosaurus giganteus .
The teeth have carinae comprised of both denticles and a keel, as in true ziphodont teeth. The carinae are well-defined, extending from the base to apex of the crown on both the mesial and distal margins. Denticles run the entire length of the preserved carinae. Due to incomplete preservation of the enamel, individual denticles of NHMUK PV OR40103 are hard to observe. While the teeth of P. manselii holotype have poorly preserved enamel, the denticles are rectangular in shape (Fig. 23). All other metriorhynchid species with denticulated teeth have denticles that are rounded in lingual view , , . This rectangular morphology is also observed in the referred P. manselii specimens in the Museum of Jurassic Marine Life. An isolated crown from the Late Jurassic of Spain  (described below) that shares the same enamel ornamentation pattern of the P. manselii holotype (apicobasal ridges, well-packed but are of low-relief) has microziphodont and rectangular denticles which are substantially smaller than those of Dakosaurus maximus and D. andiniensis , . Denticle density is also noticeably higher.
Spalling of the enamel and the characteristic macroscopic wear observed on the crowns of D. maximus are unknown in P. manselii. However, this is could be due to the latter having far fewer well-preserved crowns. Two further specimens in the Museum of Jurassic Marine Life are referable to Plesiosuchus manselii. These too lack macroscopic wear and enamel spalling, as does the isolated Spanish crown .
cf. Plesiosuchus manselii.
MUJA-1004– isolated tooth.
Locality and horizon.
La Griega Beach, Asturias, Northern Spain. Tereñes Formation, Kimmeridgian, Upper Jurassic.
The tooth MUJA-1004 is an isolated tooth crown that lacks the root (Fig. 25). The apex was damaged during excavation, and is broken (Fig. 25). The crown itself is relatively small, being 10.3 mm in apicobasal length, basal mesiodistal width is 4.9 mm, and the basal labiolingual width is 4.2 mm. The tooth is single cusped with slight mediolateral compression, and curved lingually. The crown also curves distally, with one edge being convex and the other straight (Fig. 25A, 25B); thereby allowing their identification as the mesial and distal edges, respectively. The crown lacks the apicobasal faceting observed on the labial surface of contemporaneous Geosaurus teeth , . The base of the crown is sub-rounded (Fig. 25D), with a basal mesiodistal to labiolingual width ratio of 1.17.
Isolated tooth in: (A) lingual view, (B) labial view, (C) distal view, and (D) basal view. Close-up on the denticulated carinae, showing: (E) middle of the distal carina, (F) base of the distal carina, and (G) middle of the mesial carina. Scale bar: 5 mm (A–D) and 0.5 mm (E–G). Figure modified from Figure 1 in Ruiz-Omeñaca et al. .
In MUJA-1004, carinae are comprised of both denticles and a keel. There are only carinae on the mesial and distal edges of the tooth, with no split or supernumerary carinae, or accessory ridges. Contiguous true denticles are present along the mesial and distal borders, creating well-defined carinae. Interestingly, the denticles are larger on the distal carina than on the mesial carina, and larger toward the middle of the carina than nearer the base (Fig. 25E–F). Near the middle of the carinae, the denticle densities are: 6 denticles/mm on the distal carina and 8–10 denticles/mm on the mesial one; and near the base of the crown: 8 denticles/mm on the distal carina and 10–12 denticles/mm on the mesial carina.
Compared to other ziphodont metriorhynchids MUJA-1004 had a similar number of denticles per unit length as Geosaurus , whereas Dakosaurus maximus and D. andiniensis have considerably fewer , . In MUJA-1004, the carinae extend from the base to apex of the crown. Denticles run the entire length of the preserved carinae (homogenous), differing from basal geosaurines such as “Metriorhynchus” brachyrhynchus and the “Mr Leeds’ specimen” which had heterogeneous carinae (carinae have numerous short rows of between 2 and 10 denticles) . The well-defined denticles of MUJA-1004 (Fig. 25E–G) differ from basal geosaurines and Torvoneustes, as these genera have poorly defined denticles that are difficult to distinguish even under SEM . Overall, the denticles have a fairly consistent height (isometric), but shape and dimensions can vary substantially (poorly isomorphic) (Fig. 25E–G). As with the holotype of P. manselii, the denticles are rectangular in shape (Fig. 25E–G).
The labial and lingual surfaces of MUJA-1004 are seemingly smooth when observed without optical aids; however under stereomicroscope the enamel ornamentation is composed of long apicobasally aligned ridges on both surfaces (Fig. 25A–C).
Geosaurus Cuvier, 1824 .
Lacerta gigantea von Sömmerring, 1816  (following Recommendation 67B of the ICZN Code).
“Gaia lizard”. Ge- is Ancient Greek for Gea (or Gaia), a Titan in Greek mythology that was an Earth goddess and mother to many gods. Note that Young & Andrade  incorrectly considered Ge- as referring to “the earth” (i.e. earth lizard), when in fact Cuvier (:184) stated: “par allusion à la terre mère des géans”.
Upper Kimmeridgian to lower Hauterivian. Young & Andrade  were correct in that the holotype of Geosaurus lapparenti is late Valanginian in age; however they were incorrect in stating there are no Hauterivian metriorhynchids. A second specimen described by Debelmas  is from the early Hauterivian.
France and Germany.
Metriorhynchid crocodylomorph with the following unique combination of characters (autapomorphic characters are indicated by an asterisk): triangular teeth in labial/lingual view, with strong mediolateral compression*; carinae formed by a keel and true microscopic denticles (microziphodonty, dimensions do not exceed 300 µm); tooth enamel ornamentation is inconspicuous, only visible using SEM and composed of microscopic ridges arranged an anastomosed pattern; upper and lower jaw dentition arranged as opposing blades (with maxillary overbite)*; reception pits on the lateral margin of the dentary; separation between the premaxilla and the nasal less than half the midline length of the premaxilla; inflexion point on the lateral margin of the prefrontals (in dorsal view) is directed posteriorly at an angle of approximately 70 degrees from the anteroposterior axis of the skull; acute angle (close to 60 degrees) between the medial and the posterolateral processes of the frontal; lacrimal-prefrontal fossa present, with a crest along the sutural contact; large, robust sclerotic ring within the orbit, composed of 12 sclerotic ossicles*; mandibular symphysis moderately long (approximately 8 out of 13 dentary teeth are adjacent to the symphysis)*.
Torvoneustes Andrade et al., 2010 .
Dakosaurus carpenteri Wilkinson et al., 2008  (following Recommendation 67B of the ICZN Code).
“Savage swimmer”. Torvus- is Latin for savage, while neustes is Ancient Greek for swimmer.
Metriorhynchid crocodylomorph with the following unique combination of characters (autapomorphic characters are indicated by an asterisk): robust teeth, mostly conical in shape, with little-to-moderate mediolateral compression and blunt apices; carinae formed by a keel and true microscopic denticles (microziphodonty, dimensions do not exceed 300 µm); denticles form a contiguous row along both the mesial and distal carinae, but are poorly defined, being difficult to observe even under SEM*; superficial enamel ornamentation extends onto the keel at the apical half of the crown (which in non-denticulated teeth is the false-ziphodont condition)*; tooth enamel ornamentation is intense, on the basal third/half of the crown the ornamentation is composed of apicobasally aligned ridges, which become an anastomosed pattern in the apical third/half*; inflexion point on the lateral margin of the prefrontals (in dorsal view) is directed posteriorly at an angle of approximately 70 degrees from the anteroposterior axis of the skull; acute angle (close to 60 degrees) between the medial and the posterolateral processes of the frontal.
From the first (unordered) phylogenetic analysis, 22 most parsimonious cladograms were recovered (Length = 627, CI = 0.506; RI = 0.860; RC = 0.435). The topology of the strict consensus of these cladograms is identical to that reported by Young et al. , except: 1) the base of Rhacheosaurini is now unresolved and 2) Plesiosuchus manselii is in an unresolved position within Geosaurini (Fig. 26). In other words, there is no clade (a monophyletic Dakosaurus) including D. maximus, D. andiniensis and P. manselii that excludes Geosaurus and Torvoneustes. This result supports our monographic re-description and our contention that P. manselii is distinct from Dakosaurus, and belongs to its own genus: Plesiosuchus.
Note that while both are members of the subclade Geosaurini, P. manselii is in an unresolved position with Torvoneustes, Geosaurus and Dakosaurus (D. andiniensis + D. maximus). Length = 627; ensemble consistency index, CI = 0. 506; ensemble retention index, RI = 0. 860; rescaled consistency index, RC = 0. 435. The black arrow points to the only consistent difference in the 50% majority rule consensus topology: the slightly greater resolution in Rhacheosaurini. Bootstrap-values are given above or below the relevant node.
Even with the expanded number of teleosaurid species, Pelagosaurus typus is still found to be the basal-most metriorhynchoid (following the result of Young et al. ). Within Teleosauridae, Steneosaurus is found to be paraphyletic in regards to Machimosaurus, with S. edwardsi and S. obtusidens as successive sister taxa to the clade M. hugii + M. mosae. This result does not support the contention that the Callovian “Steneosaurus” obtusidens is a subjective junior synonym of the Kimmeridgian taxon Machimosaurus hugii .
Very strong support was found for the clades: Thalattosuchia (bootstrap = 99%), metriorhynchoids more derived than Pelagosaurus (bootstrap = 94%), metriorhynchoids more derived than Teleidosaurus (bootstrap = 97%), Dakosaurus maximus + D. andiniensis (i.e. the genus Dakosaurus: bootstrap = 97%), Crocodylus (bootstrap = 90%), Machimosaurus including “Steneosaurus” obtusidens (bootstrap = 89%), Atoposauridae (bootstrap = 87%), crown-group Crocodylia (bootstrap = 84%), Geosaurus (bootstrap = 83%), and Eusuchia (bootstrap = 80%). As such, within Geosaurini there is strong support for a monophyletic Geosaurus, and a monophyletic Dakosaurus, but no support that Plesiosuchus manselii is closely related to either clade.
There is strong-to-moderate support for the clades: Machimosaurus hugii + M. mosae (bootstrap = 71%), Crocodyliformes (bootstrap = 71%), Geosaurini (bootstrap = 66%), Mesoeucrocodylia (bootstrap = 66%), Metriorhynchus hastifer + Metriorhynchus sp. (bootstrap = 64%), Gracilineustes (bootstrap = 61%) and Geosaurus giganteus + G. grandis (bootstrap = 61%).
The 50% majority-rule consensus topology is identical to the strict consensus topology, except there is now more resolution at the base of Rhacheosaurini, with Cricosaurus elegans, C. saltillense and C. suevicus forming a clade (and polytomy) to the exclusion of “Cricosaurus” sp., Metriorhynchinae indet. and Rhacheosaurus gracilis (Fig. 26). This clade is recovered ∼80–86% of the time, depending on the different start seed used. Sometimes a sister group relationship between Dakosaurus and Geosaurus (to the exclusion of Plesiosuchus) is found in the 50% majority rule consensus topology, again depending on the start seed used. However, altering the start seed generally disrupts this relationship, with Geosaurini being a polytomy of all four genera. As there is no consistent pattern, we consider the interrelationships within Geosaurini unresolved for the unordered analysis.
The second (ordered) phylogenetic analysis returned 195 most parsimonious cladograms (Length = 667, CI = 0.481, RI = 0.863, RC = 0.415). The topology of the strict consensus of these cladograms is highly unresolved (Fig. 27). Overall the relationships between non-metriorhynchid species are generally far less resolved in the ordered analysis than in the unordered analysis. However, the relationships at the base of Rhacheosaurini are now fully resolved (Fig. 27), in stark contrast to the polytomy recovered in the unordered analysis (Fig. 26).
Length = 667; ensemble consistency index, CI = 0. 481; ensemble retention index, RI = 0. 863; rescaled consistency index, RC = 0. 415. Bootstrap-values are given above or below the relevant node.
As with the unordered analysis, Plesiosuchus manselii does not form a clade with Dakosaurus maximus and D. andiniensis (Figs. 27, 28). This result further supports our contention that P. manselii is distinct from Dakosaurus. Interestingly, yet again a sister group relationship between Dakosaurus and Geosaurus (to the exclusion of Plesiosuchus) is found in the 50% majority rule consensus topology (Fig. 28). This clade is recovered ∼73–77% of the time (depending on the start seed used). This result is in agreement with the ordered analysis in the online supplementary material of Young et al. , as they too found a sister group relationship between Dakosaurus and Geosaurus which excluded Plesiosuchus.
Length = 667; ensemble consistency index, CI = 0. 481; ensemble retention index, RI = 0. 863; rescaled consistency index, RC = 0. 415. The black circles at certain nodes denote clades that break in the strict consensus topology. Bootstrap-values are given above or below the relevant node.
Very strong support was found for the clades: Thalattosuchia (bootstrap = 91%), metriorhynchoids more derived than Teleidosaurus (bootstrap = 97%), Dakosaurus maximus + D. andiniensis (i.e. the genus Dakosaurus: bootstrap = 97%), Notosuchidae (bootstrap = 92%), Crocodylus (bootstrap = 90%), Atoposauridae (bootstrap = 81%), Machimosaurus including “Steneosaurus” obtusidens (bootstrap = 81%), Eusuchia (bootstrap = 85%) and Geosaurus (bootstrap = 83%). As such, within Geosaurini there is strong support for a monophyletic Geosaurus, and a monophyletic Dakosaurus, but no strong support that Plesiosuchus manselii is closely related to either clade.
There is strong-to-moderate support for the clades: Geosaurini (bootstrap = 78%), metriorhynchoids more derived than Eoneustes (bootstrap = 77%), crown-group Crocodylia (bootstrap = 73%), Crocodyliformes (bootstrap = 72%), Notosuchia (bootstrap = 71%), Gracilineustes (bootstrap = 70%), Metriorhynchus hastifer + Metriorhynchus sp. (bootstrap = 68%), Machimosaurus hugii + M. mosae (bootstrap = 64%), Platysuchus multiscrobiculatus + Teleosaurus cadomensis (bootstrap = 63%), Metriorhynchidae (bootstrap = 62%), Cricosaurus (excluding the putative Cuban species, bootstrap = 62%) and Geosaurus giganteus + Ge. grandis (bootstrap = 62%).
Our results show that the internal relationships within Geosaurini are currently inconsistent, but there is possibly a sister group relationship between Dakosaurus and Geosaurus, with Plesiosuchus and Torvoneustes being more basal (Figs 26, 27, 28). Furthermore, the first known occurrence of all four genera is in the late Kimmeridgian of Europe (Figs 29, 30), by which time they were already morphologically distinct (Table 1). Any attempt to further elucidate the evolutionary relationships within this clade must likely await new discoveries, and a critical re-assessment of their post-cranial skeletons.
The time-span of genera with question marks is uncertain, and the grey bars are range extensions.
The species from top to bottom are: Geosaurus giganteus, Dakosaurus maximus, Torvoneustes carpenteri and Plesiosuchus manselii. The maximum known body lengths of Torvoneustes and Geosaurus are from Young et al. , while those of Dakosaurus and Plesiosuchus are from this paper. The human diver is 1.8 m in height. All metriorhynchid life reconstructions are by Dmitry Bogdanov.
The Removal of Plesiosuchus manselii from the Genus Dakosaurus
Based on our monographic revision of Dakosaurus maximus and Plesiosuchus manselii we herein remove the latter from the genus Dakosaurus. This decision was not solely based on our updated phylogenetic analysis, but our re-description of D. maximus and P. manselii, which identified numerous apomorphies that D. maximus shares with the South American D. andiniensis to the exclusion of all other metriorhynchids (including P. manselii). We found that the genus Dakosaurus (D. maximus + D. andiniensis) has the following eight autapomorphies that are not seen in other genera:
- Carinae formed by a keel and true macroscopic denticles (macroziphodonty, all denticle dimensions exceed 300 µm)
- Rostrum is dorsoventrally tall with a convex dorsal margin (oreinirostral condition)
- Rostrum in dorsal view has a distinctly wide and blunt, “bullet” shape (amblygnathous condition)
- Aligned set of large neurovascular foramina on the maxilla extending posteroventrally from the preorbital fossa
- In dorsal view, the lateral margins of the prefrontals have an inflexion point directed posteriorly at an angle of approximately 50 degrees from the anteroposterior axis of the skull
- Ventral margin of dentary sharply rises dorsally at the anterior tip
- Very short mandibular symphysis (only one third of dentary tooth-row adjacent to the symphysis)
- Surangulodentary groove has a well-developed foramen at the dentary terminus
The type species, D. maximus, can be defined by the following four autapomorphies:
- Wear facets on the mesial and distal edges of the crown that obliterate the carinae
- Thin lamina of bone projecting from the lateral alveolar margin of the premaxilla (“premaxillary lateral plates”)
- Maxilla is strongly ornamented, with most of the element covered in long deep grooves and long raised ridges orientated to the long axis of the skull, but with the alveolar margin largely smooth
- In the posterior half of the dentary, there are laminae of bone projecting from the lateral and medial dentary alveolar margins (“dentary lateral and medial plates”)
As we noted above, the preservation of D. andiniensis makes it difficult to assess whether it also shared autapomorphies one and two. Plesiosuchus manselii, however, lacks all 12 Dakosaurus and D. maximus autapomorphies. As such, the long-standing contention that P. manselii is a subjective junior synonym of D. maximus , ,  cannot be supported. Our re-description of P. manselii identified six autapomorphies that this species possesses to the exclusion of all other metriorhynchids (including the two Dakosaurus species):
- Tooth enamel ornamentation is largely inconspicuous, but there are apicobally aligned ridges of low-relief
- The mesial margin of some teeth have a pronounced distal curvature
- Palatines are strongly convex with a pronounced ridge along the midline
- In palatal view, the palatine width narrows anteriorly from the suborbital fenestrae to the midline (a distinct elongate triangular shape)
- The maxillopalatine suture midline terminus is level to the fourth maxillary alveolus
- Quadrate distal articular surface is not separated into two condyles by a sulcus, and has only a very shallow depression at the centre
As such, this unique character suite precludes us from referring P. manselii to any other metriorhynchid genus. Moreover, P. manselii lacks the autapomorphies of the other two Geosaurini genera, Geosaurus and Torvoneustes and their unique character combinations (see Table 1 and revised diagnoses below). Our only remaining position is the resurrection of the genus Plesiosuchus. The internal relationships of Geosaurini are herein found to be unresolved, but it is possible that future studies may find that the sister taxon of Dakosaurus is Geosaurus (which we found weak support for). Nonetheless, new discoveries, especially of the post-cranial skeleton, will help elucidate geosaurin interrelationships.
Implications for Geosaurini Systematics
Aside from supporting the removal of P. manselii from Dakosaurus into its own genus, the currently monospecific Plesiosuchus, our anatomical revisions and phylogenetic analysis also have implications for the identity and systematics of some other geosaurine specimens, in particular, the referral of Aggiosaurus nicaeensis to Dakosaurus by Young & Andrade . This synonymy was based on the shared presence of unusually large dentition (apicobasal length in excess of 6 cm). In fact Aggiosaurus nicaeensis has the largest dentition of any known metriorhynchid (up to 12 cm in apicobasal length) . However, following the removal of P. manselii from Dakosaurus, this dentition is now considered homoplastic and insufficient for assigning D. nicaeensis to Dakosaurus (or indeed Plesiosuchus). As we currently cannot consider Aggiosaurus to be a junior synonym of either Dakosaurus or Plesiosuchus, we must await future discoveries to determine its taxonomic affinities.
Finally, the presence of the genus Dakosaurus in Mexico is in question. Two recently discovered, but fragmentary, skulls from the Kimmeridgian of Mexico were referred to Dakosaurus based on their overall size and robustness , . However, neither specimen is well enough preserved for us to determine with any certainty whether they belong to Dakosaurus or Plesiosuchus. Moreover, one cranial characteristic (the intratemporal flange extending anteriorly into the minimum interorbital distance) once considered an autapomorphy for Dakosaurus (by Young & Andrade ) and exhibited by one of the Mexican specimens , is also present in recently discovered metriorhynchine specimens from the early Tithonian of Mexico  (Buchy pers com., 2012). Until better preserved Mexican material is discovered, attributing these specimens to Dakosaurus is considered premature.
Metriorhynchids exhibit variation in mandibular morphology relating to the relative positions of the dentary tooth row, jaw joint and coronoid process . Substantial change in mandible geometry occurs within the subfamily Geosaurinae, which is linked to the trend towards greater ‘optimum gape’ (defined as the gape at which multiple teeth come into contact with a prey item ). This metric was created to serve as a proxy for biomechanically optimal prey size (depth), and is derived from tooth row and mandibular morphology. Young et al.  derived the ‘optimum gape’ angle by: 1) drawing a straight line across the tips of the dentary teeth; 2) drawing a second line through the jaw joint that is parallel to the first line and 3) measuring the angle between the second line and the tip of the posterior most dentary tooth.
It is important to note that ‘optimum gape’ is not equivalent to maximum gape, which is difficult (and usually impossible) to accurately measure in fossil specimens that do not preserve soft tissues. We consider ‘optimum gape’ a conservative proxy that can be consistently measured in specimens without needing information on soft tissues, and that is biologically reasonable because, no matter the soft tissue morphology or range of gapes employed by an organism, multiple teeth must have come into contact with prey during feeding. Therefore, ‘optimum gape’ most likely represents a gape that the living animal actually employed. Furthermore, ‘optimum gape’ calculations also permit a straightforward comparison between species, by indicating the relative size of the gape (and therefore prey items that could be consumed) when the species open their jaws to an equivalent baseline (i.e. when every species opens its jaws to the point where multiple teeth would have come into contact with prey). It is important to remember, however, that maximum gapes would have almost certainly been larger than ‘optimum gapes’ in most cases, and many extant predators are even known to consume prey larger than their maximum gape through the evolution of sophisticated occlusion mechanics (such as the Great Barracuda Sphyraena barracuda ).
Basal metriorhynchines (Metriorhynchus superciliosus) and geosaurines (“Metriorhynchus” brachyrhynchus) have a low ‘optimum gape’, with an optimum gape angle of approximately 10–11 degrees and an optimum prey depth of 7–8% of mandibular length  (Table 3). These species lack the geometric changes relating to the ventral displacement of the dentary tooth row relative to the jaw joint that are seen in more derived geosaurines . The geosaurine “Mr Leeds’ specimen”, the sister taxon to the highly derived subclade Geosaurini, had an optimum gape angle of approximately 15 degrees and an optimum prey depth of 13% of mandibular length, both of which are relatively greater when compared to basal members of both subfamilies  (Table 3). The greater gape is a result of further displacement of the dentary tooth row and an increase in tooth crown apicobasal length. Within Geosaurini ‘optimum gape’ increases further. The highly derived geosaurin Dakosaurus andiniensis had an optimum gape angle of approximately 23 degrees, and optimum prey depth of about 19% of the mandibular length  (Table 3). Although the “barracuda-mimic” Geosaurus giganteus (NHMUK PV OR37020) , had a gape comparable with that of the older “Mr Leeds’ specimen”, being approximately 16 degrees with an optimum prey depth of about 13% of the mandibular length (Table 3).
Based on our examinations of Dakosaurus maximus and Plesiosuchus manselii we created new cranial reconstructions, which we used to investigate their gape (Fig. 31). Dakosaurus maximus had an ‘optimum gape’ intermediate between “Mr Leeds’ specimen” and D. andiniensis, with an optimum gape angle of approximately 19 degrees, and optimum prey depth of about 15% of the mandibular length. This fits with the phylogenetic position of D. maximus. Interestingly, Plesiosuchus manselii has the greatest ‘optimum gape’ of any known metriorhynchid, with an optimum gape angle of approximately 24 degrees, and optimum prey depth of about 21% of the mandibular length (Table 3). Although the gape of Plesiosuchus manselii is largely comparable to that of D. andiniensis, there was a temporal gap between these two species of approximately 5 million years. The contemporaneous Dakosaurus species that lived at the same time as P. manselii (D. maximus) had a noticeably smaller ‘optimum gape’ (19 degrees vs 24 degrees respectively). This trend of gape differentiation also occurred in the late Kimmeridgian-early Tithonian of Southern Germany, where the contemporaneous geosaurins  also had a noticeable variation in gape (19 degrees for D. maximus vs 16 degrees for Geosaurus giganteus, see Table 3).
Line drawings: (A) Plesiosuchus manselii is an original skull reconstruction based on the mandible of NHMUK PV OR40103a, while the skull is a composite of NHMUK PV OR40103 and D. andiniensis (due to the holotype lacking part of the orbital and infratemporal regions of the skull, these regions are shown by broken lines); (B) Dakosaurus maximus is an original skull reconstruction based on the mandible of SMNS 8203 and SMNS 82043, while the skull is a composite of SMNS 8203, SMNS 10819b and D. andiniensis (due to the neotype and referred specimen lacking the lower orbital and infratemporal regions, these regions are shown by broken lines); (C) Dakosaurus andiniensis, redrawn from Pol & Gasparini .
The craniodental morphologies of Dakosaurus maximus and Plesiosuchus manselii are distinct. Dakosaurus maximus is characterised by: a snout that is amblygnathous (wide and “bullet” shaped in dorsal view) and oreinirostral (tall with a convex dorsal margin), premaxillary ‘lateral plates’, serrated teeth with macroscopic denticles, tooth crown apices that are frequently broken or spalled, occlusal wear facets on the mesial and distal margins of the teeth, and reception pits on the dentigerous bones of both the upper and lower tooth rows (Figs. 2, 3, 4, 5, 6, 7, 8). Based primarily on these dental features, Young et al.  concluded that D. maximus and D. andiniensis were Mesozoic analogues of extant killer whales and false killer whales (adapted for increased biting performance at wide gapes, in particular exhibiting adaptations for dismembering large-bodied prey: macrophagy).
There are several additional lines of evidence, gleaned from our monographic redescription, that support this conclusion. First is the sophisticated occlusal pattern, as Dakosaurus (D. maximus and D. andiniensis) had tightly-packed interlocking teeth which created a precise tooth-to-tooth occlusion (see Fig. 1) . Second, biomechanical modelling has shown that oreinirostral snouts (like that of Dakosaurus) are more resistant to both torsional and bending stresses than a platyrostral or tubular snout –. Third, biomechanical modelling also confirms that, in other archosaur taxa, ‘lateral plates’ like those of Dakosaurus occur on dentigerous bones that experience high localised stress thereby helping to dissipate feeding-induced stresses acting on the bases of adjacent teeth . Fourth, Dakosaurus is the only known metriorhynchid to exhibit macroziphodonty , , , and denticulated teeth are known to be efficient at slicing and cutting because they require less energy to penetrate food, thereby making larger and tougher organisms more energetically feasible prey items , , . Finally, the high incidence of enamel spalling and crown apex breakage in D. maximus (Fig. 8)  is interesting when compared to recent work on the killer whale, which suggests that high incidences of crown breakage/apical wear may be due to a diet rich in abrasive-skinned chondrichthyans or a generalist diet of predominately suction-feeding whole fish , . Differences in how ‘extreme’ tooth wear is between Dakosaurus maximus and killer whales can be explained through tooth replacement. Archosaurs, like Dakosaurus, have continual tooth replacement whereas odontocetes, like killer whales, are monophylodont (single set of teeth) .
In summary, Dakosaurus had a unique shearing occlusion pattern, a snout that was optimised for resisting torsional and bending stresses induced during prey capture; tooth crown bases that were, to some degree, protected from high feeding-induced stresses by ‘lateral plates’; macroscopically serrated tooth crowns, and crown apices that are frequently broken and spalled. All of the evidence presented above suggests that Dakosaurus used its teeth for cutting pieces small enough to swallow from large prey items, and had a skull that could resist the induced stresses involved with feeding on large and strong prey.
The craniodental morphology of Plesiosuchus manselii is in marked contrast to that of Dakosaurus maximus. Plesiosuchus manselii is distinct in having: a snout that is substantially wider than tall, with a concave dorsal margin; no ‘lateral plates’ on the dentigerous bones; serrated teeth with microscopic denticles; tooth crown apices that do not exhibit spalled surfaces or breaks; tooth crowns that do not exhibit occlusal wear facets on the mesial and distal carinae; and tooth-bearing bones lacking reception pits (Figs. 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23; based on NHMUK PV OR40103, NHMUK PV R1089 and the two specimens in the Museum of Jurassic Marine Life, K181 and K434).
The lack of crown breakage and tooth wear (both spalling and carinal wear surfaces) is interesting. The presence of two sympatric macrophagous metriorhynchids that differ so markedly in tooth wear is intriguingly similar to what is observed in North Atlantic killer whales. There are two ‘types’ of North Atlantic killer whales: 1) ‘type 1′ is a small with extreme tooth wear, and 2) ‘type 2′ which is larger (maximum size is 2 m longer than ‘type 1′) and lacks tooth wear . This is exactly what we see with Dakosaurus maximus and Plesiosuchus manselii: D. maximus is smaller with extreme apical wear (see Fig. 3E and 3F in ), and P. manselii lacks tooth wear and has a maximum size two metres greater than D. maximus (see description above, Fig. 30). In the North Atlantic, ‘type 1′ killer whales are generalists that suction-feed on whole fish (mackerel or herrings), although the sub-populations are known to feed on higher trophic levels such as seals; while ‘type 2′ killer whales are specialists that feed on other cetaceans. If the shared suite of morphofunctional characteristics between these killer whales and between Dakosaurus and Plesiosuchus are indicative of diet, then Plesiosuchus would be specialised in feeding on other marine reptiles and Dakosaurus would be a generalist and possible suction-feeder (the possibility of which is discussed below).
Furthermore, the difference in ‘optimum gape’ is considerable between Plesiosuchus manselii and Dakosaurus maximus (Fig. 31, Table 3). This suggests that these two species had distinct feeding ecologies. Unfortunately, without better preserved specimens we cannot attempt to reconstruct the occlusion mechanics of Plesiosuchus manselii. Regardless, the Plesiosuchus skull was not as well-suited to resist high stresses (in particular torsion) when compared to D. maximus, because it lacks an oreinirostral snout and ‘lateral plates’ on dentigerous bones; but coupled with its larger body-size (see above and ) and greater ‘optimum gape’ (Table 3) Plesiosuchus could have fed upon larger bodied prey. When directly comparing the ‘optimum prey depth’ at the same mandibular length (60 cm, see Table 3), there is a significant difference between P. manselii and D. maximus (12.6 cm vs 9 cm respectively). Interestingly, extant odontocete species that are sympatric and share a similar diet limit inter-specific competition by predating upon prey items of different size (such as the cephalopod specialists the sperm whale and the pygmy sperm whale, with the former predating upon larger-bodied cephalopod species than the latter) . At the very least, it is clear that D. maximus and P. manselii had distinct morphologies and different sets of feeding-related characters, which may help explain why these two large-bodied crocodylomorphs were able to coexist in the same ecosystem.
Adaptations for Macrophagy and Suction Feeding
Within Thalattosuchia two lineages exhibit adaptations towards macrophagy (feeding on large-bodied prey). Interestingly, these two lineages (the teleosaurid Machimosaurus and geosaurine metriorhynchids) share the same suite of morphofunctional adaptations , , , , , , , , , , , , , :
- Foreshortening of the snout (culminating in the brevirostrine condition)
- Increase in snout width (snout wider than tall)
- Reduction in dentition count (fewer than 20 teeth per tooth row)
- Reduction in mandibular symphysis length (under 45% of total mandible length in Machimosaurus, under 35% in metriorhynchids)
- Increase in width between the left and right jaw joints (high ratio of the maximum width from one quadrate to another, to basicranial length)
- Increase in supratemporal fenestra size
- Bicarinate teeth with serrated mesial and distal margins
- Vertically orientated tooth crowns resulting in either interlocking occlusion or a “scissor-like” double-bladed arrangement
- Increase in ‘optimum gape’ (achieved by ventral displacement of the dentary tooth row and disparity in size between anterior and posterior teeth in metriorhynchids, reduction in crown apicobasal length and disparity in size between anterior and posterior teeth in Machimosaurus)
In addition to possessing this suite of morphofunctional adaptations, Dakosaurus has a unique snout morphology: its snout is both amblygnathous and oreinirostral, with a very short mandibular symphysis (i.e. only the anterior-most mandibular teeth are adjacent to the symphysis) (Figs. 1, 2, 3). It is intriguing that Dakosaurus simultaneously possesses the macrophagous morphofunctional complex, an amblygnathous snout and a very short symphysis. Recent studies on cetacean craniomandibular evolution have discovered a morphofunctional complex for suction feeding–defined by Werth (:580) as: “the creation of negative pressure in the oral or pharyngeal expansion or both to capture, ingest and transport discrete prey items” –in both odontocetes and fossil mysticetes , , namely:
- Increase in snout width (the amblygnathous condition)
- Reduction in dentition count
- Reduction in mandibular symphysis length (very short, only the anterior-most mandibular teeth adjacent)
- Increase in width between the left and right jaw joints (high ratio of the maximum width from one quadrate to another, to basicranial length)
Although two clades of thalattosuchians evolved macrophagous adaptations, only Dakosaurus evolved amblygnathy and the almost terminal mandibular symphysis seen in suction feeding odontocetes. In cetaceans, amblygnathy, short mandibular symphyses and widely separated jaw joints (potential expansion of the oesophagus) creates a larger oral cavity and a more circular mouth, thus improving water flow for suction feeding , . Dakosaurus maximus is both amblygnathous and has a very short mandibular symphysis (Fig. 3), which combined with the ventrally displaced tooth-row and widely separated jaw joints ancestral to all geosaurins ,  would have greatly enlarged the oral cavity and resulted in a more circular mouth.
Furthermore, the similarities in craniomandibular form between Dakosaurus and the basal mysticete cetacean Janjucetus are striking (low tooth count, serrated teeth, amblygnathous and oreinirostral snout, very short mandibular symphysis ). This morphology has been considered indicative of a raptorial/suction feeder . We concur, and hypothesize that the species within the genus Dakosaurus may also be the first known suction feeding marine crocodylomorphs. This does not contradict Dakosaurus having a killer whale-style feeding ecology (see above and ), as juvenile killer whales can produce considerable suction, and further work is needed to determine if juvenile killer whales use suction during feeding and if adults do when predating on small prey items . We note that most extant suction feeding cetaceans have their mouths delimited by the characteristic mammalian condition of lips or cheeks, which are important in controlling suction movements and formed by facial muscles. By virtue of their archosaurian ancestry, metriorhynchids most likely did not possess extensive lips and cheeks or facial muscles in general, at least of the mammalian variety. However, not all cetaceans control suction feeding using only lips and cheeks: the extant sperm whale Physeter macrocephalus lacks the facial muscles and soft tissues constraining mouth shape, but can generate gular pressure through use of the tongue . Central to this ability is the possession of hyoids that are extremely large and flexible. Hyoids are currently unknown for Dakosaurus, but future discoveries will help to determine whether it may have also used a hyoid-driven method for generating negative pressure. Although the evidence for suction feeding in metriorhynchids is weak, due to the lack of facial muscles and information from a hyolingual apparatus, perhaps further studies of underwater feeding and the function of the palate in extant crocodylians will permit further exploration of how marine crocodylomorphs may have dealt with this functional constraint of living in a marine environment. As metriorhynchids have closer affinities to living aquatic taxa than any other fossil marine reptile group, they may be the most optimal group for exploring this functional system.
Large-bodied Predators of the Kimmeridge Clay Sea
Although Plesiosuchus manselii is the largest known metriorhynchid, in the Kimmeridge Clay Formation of England there were numerous other marine reptiles that rivalled it in size. The ophthalmosaurid ichthyosaur genus Brachypterygius also attained large body size. The largest specimen had a mandibular length of 123 cm (CAMSM J68516), while a smaller specimen from Kimmeridge had a mandibular length of 82 cm (BRSMG Ce16696). Brachypterygius is characterised by: small orbit, long maxilla, robust lower and upper jaws, and large teeth . The morphology of Brachypterygius is in contrast to that of a contemporaneous smaller ophthalmosaurid species, Nannopterygius enthekiodon, which had a proportionally long snout, large orbits and small teeth .
Presently, three giant pliosaur species are considered as present in the Kimmeridge Clay Formation: Pliosaurus brachydeirus, P. portentificus and P. macromerus. However, the taxonomy of these species is still highly uncertain , . Confusion surrounds taxonomy at both the generic and specific levels, and about the referral of specimens to species with no overlapping elements. Pliosaurus brachydeirus (which may be the senior subjective synonym of P. brachyspondylus ) has the ‘long mandibular symphysis morphology’: 10–12 dentary alveoli adjacent to the symphysis. This morphology is observed in P. brachydeirus/brachyspondylus specimens (BRSMG Cc332, CAMSM J35991, OUMNH J9245B), the largest of which reached 1.7 m. Pliosaurus portentificus is known from three mandibles with eight dentary alveoli adjacent to the symphysis, the largest being two metres in length . However, between Pliosaurus brachydeirus/brachyspondylus and P. portentificus there is continuous variation in the number of dentary alveoli adjacent to the symphysis. Noè et al. (:22) mentions three French P. brachyspondylus specimens which have nine symphyseal alveoli, one of the key characters used to erect P. portentificus. As the Pliosaurus macromerus holotype (a large propodial) lacks mandibular material there is currently no justification in assigning the large mandibles with short symphyses to this species . In fact, Noè et al.  could not dismiss a synonymy between P. macromerus and P. portentificus, or a synonymy between P. macromerus and the ‘long’ mandibular symphyseal P. brachydeirus.
Finally, there are the two very large pliosaur mandibles from the Kimmeridge Clay Formation, each with five/six dentary alveoli adjacent to the mandibular symphysis: NHMUK PV OR39510 (the Pliosaurus grandis skull and mandible described by Owen ) and OUMNH J10454. Although these specimens have been referred to Pliosaurus macromerus, this cannot currently be justified . This taxon is possibly the largest predator of the Kimmeridge Clay Sea, with the mandible OUMNH J10454 being an estimated three metres in length when complete.
The Kimmeridge Clay Sea was curiously plentiful in large-bodied marine reptiles, of which pliosaurs were the largest organisms, growing to exceptional size. The large ichthyosaur Brachypterygius and Plesiosuchus manselii were comparable in size, both with cranial lengths exceeding one metre. Other metriorhynchid species from the Lower Kimmeridge Clay Formation (e.g. Metriorhynchus geoffroyii/palpebrosus, Torvoneustes carpenteri and Dakosaurus maximus) were significantly smaller is size (Fig. 30), with basicranial lengths of approximately 80 cm or less , , . While the taxonomy of the marine reptiles of the Kimmeridge Clay Formation has yet to be settled, it is intriguing to consider how so many different clades (and species within those clades) co-existed. It is possible that variation in body size and craniodental morphology facilitated differences in resource acquisition, which enabled, and helped maintain, the stratification of available niches (as has been suggested for thalattosuchians , , , –). At the very least, as we argue above, such craniodental differences probably help explain how the two mid-to-large-sized metriorhynchids, P. manselii and the smaller D. maximus, were able to coexist.
These contentions are supported by a recent study on nine sympatric deep-diving odontocete species from the Bay of Biscay, which shows that they subdivide available niches on four criteria: 1) position in the water column, 2) prey type (predominately fish vs predominately cephalopod vs cephalopod-rich diet including pelagic crustaceans and/or pelagic tunicates), 3) prey size and 4) potentially prey quality (e.g. prey energy content) . Although nine species are known to be deep-diving, a total of 19 odontocete species are known to be either resident (four confirmed and five suspected) or migratory (ten other species) in the Bay of Biscay . Of the nine deep-diving odontocetes, all but one species is predominately teuthophagous . Interestingly all ten sympatric raptorial shark species in the Bay of Biscay have a diet of ∼ 30% cephalopods . The sharks also subdivide available niches, through position in the water column, body-size, lifestyle and feeding strategy .
The crux of this paper is a systematic and anatomical revision of Late Jurassic European metriorhynchid crocodylomorph specimens that have historically been assigned to the aberrant, macrophagous genus Dakosaurus. Our focus is on two taxa in particular, Dakosaurus maximus and Plesiosuchus manselii, which we show are not particularly closely related (thus necessitating the resurrection of Plesiosuchus as a distinct genus). Based on overall morphological observation of cranial bones and teeth, we show that these two species have very different craniodental morphologies and functional ecologies.
Dakosaurus maximus has several characteristic features: an amblygnathous, brevirostrine and oreinirostral snout; premaxillary ‘lateral plates’; strongly ornamented maxillae; raised lateral and medial dentary alveolar margins; a very short mandibular symphysis; frequently broken crown apices; wear facets along the mesial and distal edges of the crown; and reception pits on the dentigerous bones of the upper and lower jaws. These features suggest that this species was adapted for dismembering large-bodied prey, had a unique occlusion pattern in which the upper and lower jaw teeth contacted each other mesiodistally in the sagittal plane and had a greatly enlarged oral cavity that may have enabled raptorial/suction feeding.
Plesiosuchus manselii is diagnosed by: strongly convex palatines with a pronounced ridge along the midline; a maxillopalatine suture that extends anteriorly from the suborbital fenestrae to the midline, anteriorly extending level to the fourth maxillary alveolus; the articular surface of the quadrate is not separated into two condyles by a sulcus; and tooth enamel ornamentation composed of apicobasal ridges of low relief, with serrations composed of microscopic true denticles. While Plesiosuchus manselii lacks many of the features seen in D. maximus that may have been the adaptations for dismembering large struggling prey, this species had a greater ‘optimum gape’ and was larger in size, comparable to the large-bodied Middle Jurassic pliosaur Liopleurodon ferox. Furthermore, the difference in enamel spalling and crown breakage between these species suggest that Dakosaurus maximus fed on abrasive food (such as sharks) or suction-fed, whereas Plesiosuchus manselii may have fed on other marine vertebrates. So, while Plesiosuchus may have consumed large prey, the prey size of Plesiosuchus was more likely to be limited by their own head size, whereas Dakosaurus could have fed on prey of sizes larger than its head because it could break them into smaller pieces.
These new observations, along with previous studies on other geosaurins (Geosaurus and Torvoneustes), indicate that while the genera in this subclade were specialized to feed on large-bodied prey (macrophagy) they were strongly differentiated in feeding style and ecology. The intriguing discovery that Dakosaurus may have been a suction feeder, like many extant odontocetes, further highlights that our understanding of Mesozoic marine ecosystems is still incomplete. Further examination of extant marine mammal analogues and crocodylomorphs, as well as equally important long-forgotten museum specimens will further elucidate the evolution of this remarkable group of marine tetrapods.
Characters and coding sources used in the phylogenetic analysis. The document also has a list of supplementary references and a complete list of institutional abbreviations.
Character by taxon matrix used in the phylogenetic analysis (nexus file).
We would like to thank O. Rauhut (BSPG), M. Lowe (CAMSM) and R. F. Vaughan and R. Barnett (BRSMG) for providing generous access to the specimens in their care; Ben Creisler for discussion on etymology; and Kevin Seymour (Royal Ontario Museum) for looking for the lost ‘Ramsay Wright specimens’ of Plesiosuchus manselii. We would especially like to thank Phil Hurst (NHMUK Image Resources) for the photographs of NHMUK PV OR40103, NHMUK PV OR40103a and NHMUK PV R1089. In addition, we thank Dmitry Bogdanov for making life reconstructions of Geosaurus giganteus, Dakosaurus maximus, Torvoneustes carpenteri and Plesiosuchus manselii. We would also like to thank Richard Butler, Jeremy Martin and an anonymous reviewer whose comments improved the quality of this paper.
Conceived and designed the experiments: MTY. Performed the experiments: MTY MS. Analyzed the data: MTY SLB BLB MS JIR-O. Contributed reagents/materials/analysis tools: MBdA JBD LS MSF JIR-O RRS. Wrote the paper: MTY SLB BLB JIR-O.
- 1. Young MT, Brusatte SL, Ruta M, Andrade MB (2010) The evolution of Metriorhynchoidea (Mesoeucrocodylia, Thalattosuchia): an integrated approach using geometrics morphometrics, analysis of disparity and biomechanics. Zool J Linn Soc 158: 801–859.
- 2. Young MT, Andrade MB, Brusatte SL, Sakamoto M, Liston J (2012) The oldest known metriorhynchid super-predator: a new genus and species from the Middle Jurassic of England, with implications for serration and mandibular evolution in predacious clades. J Syst Palaeontol. In press.
- 3. Lydekker R (1888) Catalogue of the Fossil Reptilia and Amphibia in the British Museum (Natural History), Cromwell Road, S.W., Part 1. Containing the Orders Ornithosauria, Crocodilia, Dinosauria, Squamata, Rhynchocephalia, and Proterosauria. London: British Museum of Natural History. 309 p.
- 4. Fraas E (1902) Die Meer-Krocodilier (Thalattosuchia) des oberen Jura unter specieller berücksichtigung von Dacosaurus und Geosaurus. Palaeontographica 49: 1–72.
- 5. Andrews CW (1913) A descriptive catalogue of the marine reptiles of the Oxford Clay, Part Two. London: British Museum (Natural History). 285 p.
- 6. Fernández M, Gasparini Z (2000) Salt glands in a Tithonian metriorhynchid crocodyliform and their physiological significance. Lethaia 33: 269–276.
- 7. Fernández M, Gasparini Z (2008) Salt glands in the Jurassic metriorhynchid Geosaurus: implications for the evolution of osmoregulation in Mesozoic crocodyliforms. Naturwissenschaften 95: 79–84.
- 8. Fernández MS, Herrera Y (2009) Paranasal sinus system of Geosaurus araucanensis and the homology of the antorbital fenestra of metriorhynchids (Thalattosuchia: Crocodylomorpha). J Vert Paleontol 29: 702–714.
- 9. Leardi JM, Pol D, Fernández MS (2012) The antorbital fenestra of Metriorhynchidae (Crocodyliformes, Thalattosuchia): testing its homology within a phylogenetic framework. J Vert Paleontol 32: 490–494.
- 10. Young MT, Andrade MB (2009) What is Geosaurus? Redescription of G. giganteus (Thalattosuchia, Metriorhynchidae) from the Upper Jurassic of Bayern, Germany. Zool J Linn Soc 157: 551–585.
- 11. Andrade MB, Young MT, Desojo JB, Brusatte SL (2010) The evolution of extreme hypercarnivory in Metriorhynchidae (Mesoeucrocodylia: Thalattosuchia): evidence from microscopic denticle morphology and a new tri-faceted Kimmeridgian tooth from Germany. J Vert Paleontol 30: 1451–1465.
- 12. Cau A, Fanti F (2011) The oldest known metriorhynchid crocodylian from the Middle Jurassic of North-eastern Italy: Neptunidraco ammoniticus gen. et sp. nov. Gondwana Res 19: 550–565.
- 13. Young MT, Bell MA, Brusatte SL (2011) Craniofacial form and function in Metriorhynchidae (Crocodylomorpha: Thalattosuchia): modelling phenotypic evolution with maximum likelihood methods. Biol Lett 7: 913–916.
- 14. Young MT, Bell MA, Andrade MB, Brusatte SL (2011) Body size estimation and evolution in metriorhynchid crocodylomorphs: implications for species diversification and niche partitioning. Zool J Linn Soc 163: 1199–1216.
- 15. Pierce SE, Angielczyk KD, Rayfield EJ (2009) Morphospace occupation in thalattosuchian crocodylomorphs: skull shape variation, species delineation, and temporal patterns. Palaeontology 52: 1057–1097.
- 16. Pierce SE, Angielczyk KD, Rayfield EJ (2009) Shape and mechanics in thalattosuchian (Crocodylomorpha) skulls: implications for feeding behaviour and niche partitioning. J Anat 215: 555–576.
- 17. Young MT, Brusatte SL, Beatty BL, Andrade MB, Desojo JB (2012) Tooth-on-tooth interlocking occlusion suggests macrophagy in the Mesozoic marine crocodylomorph Dakosaurus. Anat Rec 295: 1147–1158.
- 18. Wilkinson LE, Young MT, Benton MJ (2008) A new metriorhynchid crocodile (Mesoeucrocodylia: Thalattosuchia) from the Kimmeridgian (Upper Jurassic) of Wiltshire, UK. Palaeontology 51: 1307–1333.
- 19. Gasparini ZB, Pol D, Spalletti LA (2006) An unusual marine crocodyliform from the Jurassic-Cretaceous boundary of Patagonia. Science 311: 70–73.
- 20. Pol D, Gasparini ZB (2009) Skull anatomy of Dakosaurus andiniensis (Thalattosuchia: Crocodylomorpha) and the phylogenetic position of Thalattosuchia. J Syst Palaeontol 7: 163–197.
- 21. Verwaijen D, Van Damme R, Herrel A (2002) Relationships between head size, bite force, prey handling efficiency and diet in two sympatric lacertid lizards. Func Ecol 16: 842–850.
- 22. Vignaud P, Gasparini ZB (1996) New Dakosaurus (Crocodylomorpha, Thalattosuchia) from the Upper Jurassic of Argentina. C R Acad Sci IIa: 245–250.
- 23. Plieninger T (1846) Prof. Dr. Th. Plieninger hielt nachstehenden vortrag über ein neues Sauriergenus und die Einreihung der Saurier mit flachen, schneidenden Zähnen in eine Familie. Württ Natwiss Jahresh 2: 129–183.
- 24. Hulke JW (1870) Note on a crocodilian skull from Kimmeridge Bay, Dorset. Quart J Geol Soc London 26: 167–172.
- 25. Ambayrac H (1913) Une mâchoire de grand reptile du Jurassique supérieur. C R Assoc Fr Ava Sci 42: 97–98.
- 26. Buchy M-C (2008) New occurrence of the genus Dakosaurus (Reptilia, Thalattosuchia) in the Upper Jurassic of north-eastern Mexico with comments upon skull architecture of Dakosaurus and Geosaurus. N Jahrb Geol Paläontol Abh 249: 1–8.
- 27. Buchy M-C, Stinnesbeck W, Frey E, Gonzalez AHG (2007) Première mention du genre Dakosaurus (Crocodyliformes, Thalattosuchia) dans le Jurassique supérieur du Mexique. Bull Soc Géol Fr 178: 63–69.
- 28. Ruiz-Omeñaca JI, Pinuela L, García-Ramos JC (2010) Dakosaurus sp. (Thalattosuchia: Metriorhynchidae) en el Kimmeridgiense de Colunga (Asturias)/Dakosaurus sp. (Thalattosuchia: Metriorhynchidae) in the Kimmeridgian of Colunga (Asturias, northern Spain). In: Ruiz-Omeñaca JI, Pinuela L, García-Ramos JC, editors. Comunicaciones del V Congreso del Jurasico de Espana. Colunga: Museo del Jurasico de Asturias. 193–199.
- 29. Plieninger T (1849) Ueber Geosaurus maximus.. Württ Natwiss Jahresh 5: 252.
- 30. Quenstedt FA (1843) Das Flötzgebirge Württembergs: mit besonderer rücksicht auf den Jura. Tübingen: Laupp. 493 p.
- 31. Quenstedt FA (1852) Handbuch der Petrefaktenkunde, 1st Edition. Tübingen: Laupp. 792 p.
- 32. Quenstedt FA (1856) Sonst und Jetzt: Populäre Vortäge über Geologie. Tübingen: Laupp. 288 p.
- 33. Quenstedt FA (1858) Der Jura. Tübingen: Laupp. 842 p.
- 34. Mason JW (1869) On Dakosaurus from the Kimmeridge Clay of Shotover Hill. Quart J Geol Soc 25: 218–220.
- 35. Wagner A (1853) Beschreibung einer fossilen Schildkröte und etlicher anderer Reptilien-Ueberreste aus den lithographischen Schiefern und dem Grünsandsteine von Kelheim. Abh Math-Phys Kl K Bayer Akad Wiss 7: 239–264.
- 36. Schlosser M (1881) Die Fauna des Kelheimer Diceras-Kalkes. Erste Abteilung: Vertebrata, Crustacea, Cephalopoda und Gastropoda. Palaeontographica 28 45: 109.
- 37. Von Zittel KA (1887–1890) Handbuch der Paläontologie, Abteilung 1 Paläozoologie, Band 3, Vertebrata (Pisces, Amphibia, Reptilia, Aves). München und Leipzig: R. Oldenbourg, xii +900 p.
- 38. Wagner A (1858) Zur Kenntniss der Saurier aus den lithographischen Schiefen. Abh Math-Phys Kl K Bayer Akad Wiss 8: 415–528.
- 39. Quenstedt FA (1885) Handbuch der Petrefaktenkunde, 3rd Edition. Tübingen: Laupp, 1239 p.
- 40. Debelmas J (1952) Un crocodilien marin dans l’Hauterivien des environs de Comps (Var) Dacosaurus maximus Plieninger var. gracilis Quenstedt. Trav Lab Géol Fa Sci Univ Grenoble 29: 101–116.
- 41. Debelmas J, Strannoloubsky A (1956) Découverte d’un crocodilien dans le Néocomien de La Martre (Var) Dacosaurus lapparenti nov. sp. Trav Lab Géol Fac Sci Univ Grenoble 33: 89–99.
- 42. Seeley HG (1869) Index to the fossil remains of Aves, Ornithosauria, and Reptilia, from the Secondary system of strata arranged in the Woodwardian Museum of the University of Cambridge. Cambridge: Deighton, Bell and Co, xxiii +143 p.
- 43. Sauvage H-E (1871) De la présence d’un reptile du type mosasaurien dans le formations Jurassique supérieures de Boulogne-sur-Mer. C R Hebd Séances Acad Sci 73: 141–142.
- 44. Sauvage H-E (1873) Notes sur les reptiles, fossiles. 5 Sur le genre Dacosaurus, Quenstedt. Bull Soc Géol Fr, série 3: 380–385.
- 45. Owen R (1849–1884) A history of British fossil reptiles, volume 3. London: Cassell & Company Limited. 199p.
- 46. Steel R (1973) Crocodylia. Handbuch der Paläoherpetologie, Teil 16. Stuttgart: Gustav Fischer Verlag. 116 p.
- 47. Grange DR, Benton MJ (1996) Kimmeridgian metriorhynchid crocodiles from England. Palaeontology 39: 497–514.
- 48. Hulke JW (1869) Notes on some fossil remains of a gavial-like saurian from Kimmeridge Bay collected by J.C. Mansel, Esq., establishing its identity with Cuvier’s deuxième gavial d’Honfleur, tête à museau plus court (Steneosaurus rostro-minor of Geoffroy St. Hilaire) and with Quenstedt’s Dakosaurus. Quart J Geol Soc 25: 390–401.
- 49. Geoffroy Saint-Hilaire É (1825) Recherches sur l’organisation des gavials. Mém Mus Natl Hist Nat 12: 97–155.
- 50. Cuvier G (1824) Article IV Des os de deux espèces inconnues de Gavials; trouvés pêle-mêle près de Honfleur et du Hâvre. Sur les Ossemens Fossiles. Nouvelle édition, Tome Cinquieme, Partie 2 Paris: Dufour & d’Occagne. 143–160.
- 51. Vignaud P (1995) Les Thalattosuchia, crocodiles marins du Mésozoïque: Systématique, phylogénie, paléoécologie, biochronologie et implications paléogéographiques. Unpublished PhD thesis. Poitiers: Université de Poitiers. 245 pp.
- 52. Owen R (1884) On the cranial and vertebral characters of the crocodilian genus Plesiosuchus, Owen. Quart J Geol Soc London 40: 153–159.
- 53. Woodward AS (1885) On the literature and nomenclature of British fossil Crocodilia. Geol Mag, Decade 3 2: 496–510.
- 54. Owen R (1869) Monograph on the Reptilia of the Kimmeridge Clay and Portland stone, volume 3. London: The Palaeontographical Society. 12 p.
- 55. Owen R (1840) Report on British fossil reptiles, part 1. Rep Br Assoc Adv Sci 9: 43–126.
- 56. Owen R (1842) Report on British fossil reptiles, part 2. Rep Br Assoc Adv Sci 11: 60–204.
- 57. Brown DS (1981) The English Upper Jurassic Plesiosauroidea (Reptilia) and a review of the phylogeny and classification of the Plesiosauria. Bull Br Mus (Nat Hist): Geol 35: 253–347.
- 58. Eudes-Deslongchamps E (1867–1869) Notes Paléontologiques. Caen and Paris: Le Blanc Hardel et Savy. 320–392.
- 59. Tarlo B (1960) A review of the Upper Jurassic pliosaurs. Bull Br Mus (Nat Hist), Geol Series 4: 145–189.
- 60. Buffetaut E (1982) Aggiosaurus nicaeensis Ambayrac, 1913, from the Upper Jurassic of south-eastern France: A marine crocodilian, not a dinosaur. N Jahrb Geol Paläontol Monatsh 8: 469–475.
- 61. Benton MJ, Spencer PS (1995) Fossil reptiles of Great Britain. London: Chapman and Hall. 386pp.
- 62. Hua S, Vasse D, Buffetaut E, Martin M, Mazin J-M, et al. (1993) Un squelette de Machimosaurus mosae Sauvage et Lienard, 1879 (Crocodylia, Thalattosuchia) dans le Kimméridgien du Boulonnais. C R Acad Sci II Mec, Phys, Chim, Sci 317: 851–856.
- 63. Buffetaut E (1982) Le crocodilien Machimosaurus VON MEYER (Mesosuchia, Teleosauridae) dans le Kimméridgien de l’Ain. Bull trim Soc Géol Normandie Amis Mus Havre 69: 17–27.
- 64. Lepage Y, Buffetaut E, Hua S, Martin JE, Tabouelle J (2008) Catalogue descriptif, anatomique, geologique et historique des fossiles présentés a l’exposition « Les Crocodiliens fossiles de Normandie » (6 novembre - 14 decembre 2008). Bull Soc Géol Normandie Amis Mus Havre 95: 5–152.
- 65. Gasparini ZB, Dellapé D (1976) Un nuevo cocodrilo marino (Thalattosuchia, Metriorhynchidae) de la Formación Vaca Muerta (Jurasico, Tithoniano) de la Provincia de Neuquén (República Argentina). Actas Primer Congr Geol Chileno Santiago 1: c1–c21.
- 66. Lydekker R (1890) On a crocodilian jaw from the Oxford Clay of Peterborough. Quart J Geol Soc London 46: 284–288.
- 67. Fernández MS, Carabajal AP, Gasparini Z, Díaz GC (2011) A metriorhynchid crocodyliform braincase from northern Chile. J Vert Paleontol 31: 369–377.
- 68. Nesbitt SJ (2011) The early evolution of archosaurs: relationships and the origins of major clades. Bull Am Mus Nat Hist 352: 1–292.
- 69. Nesbitt SJ, Brusatte SL, Desojo JB, Liparini A, Gower DJ, et al.. (2012) Rauisuchia. In: Nesbitt SJ, Desojo JB, editors. Anatomy, Phylogeny and Palaeobiology of Basal Archosaurs. London: Geological Society of London Special Publication. In press.
- 70. Olsen PE, Sues H-D, Norell MA (2000) First record of Erpetosuchus (Reptilia: Archosauria) from the Late Triassic of North America. J Vert Paleontol 20: 633–636.
- 71. Benton MJ, Walker AD (2002) Erpetosuchus, a crocodile-like basal archosaur from the Late Triassic of Elgin, Scotland. Biol J Linn Soc 136: 25–47.
- 72. Goloboff PA, Farris JS, Nixon KC (2008) TNT, a free program for phylogenetic analysis. Cladistics 24: 774–786.
- 73. Felsenstein J (1985) Confidence limits on phylogenies: an approach using the bootstrap. Evolution 39: 783–791.
- 74. Hay OP (1930) Second bibliography and catalogue of the fossil vertebrata of North America, volume 2. Washington, DC: Carnegie Institute Washington. 1094 p.
- 75. Walker AD (1970) A revision of the Jurassic reptile Hallopus victor (Marsh), with remarks on the classification of crocodiles. Philos Transact R Soc Lond B Biol Sci 257: 323–372.
- 76. Fraas E (1901) Die Meerkrokodile (Thalattosuchia n. g.) eine neue sauriergruppe der Juraformation. Jahresh Ver vaterl Natkd Württ 57: 409–418.
- 77. Fitzinger LJFJ (1843) Systema reptilium. Wien: Braumüller et Seidel. 136 p.
- 78. Lydekker R (1889) On the remains and affinities of five genera of Mesozoic reptiles. Quart J Geol Soc 45: 41–59.
- 79. Ochev VG (1981) [Marine crocodiles in the Mesozoic of Povolzh’e] (in Russian). Priroda 1981: 103.
- 80. Buchy M-C (2007) Mesozoic marine reptiles from north-east Mexico: description, systematic assemblages and palaeobiogeography. Unpublished PhD thesis, University of Karlsruhe, 98 pp. Available: http://digbib.ubka.uni-karlsruhe.de/volltexte/1000007307. Accessed 2012 Aug 26.
- 81. Leeds ET (1908) On Metriorhynchus brachyrhynchus (Deslong.) from the Oxford Clay near Peterborough. Quart J Geol Soc London 64: 345–357.
- 82. Piveteau J (1928) Etudes sur quelques Amphibiens et Reptiles fossiles: Le reptile de Gigondas et l’évolution des Métriorhynchidés. Ann Paléontol 17: 30–47.
- 83. Von Huene F (1925) Die Saurierfauna des Portlandkalkes von Solothurn. Eclogae geol Helv 19: 584–603.
- 84. Hua S, Vignaud P, Atrops F, Clément A (2000) Enaliosuchus macrospondylus Koken, 1883 (Crocodylia, Metriorhynchidae) du Valanginien de Barret-le-Bas (Hautes Alpes, France): un cas unique de remontée des narines externs parmi les crocodiliens. Géobios 33: 467–474.
- 85. Young MT, Rayfield EJ, Holliday CM, Witmer LM, Button DJ, et al. (2012) Cranial biomechanics of Diplodocus (Dinosauria, Sauropoda): testing hypotheses of feeding behaviour in an extinct megaherbivore. Naturwissenschaften 99: 637–643.
- 86. Schubert BW, Ungar PS (2005) Wear facets and enamel spalling in tyrannosaurid dinosaurs. Acta Palaeontol Pol 50: 93–99.
- 87. Foote AD, Newton J, Piertney SB, Willerslev E, Gilbert MTP (2009) Ecological, morphological and genetic divergence of sympatric North Atlantic killer whale populations. Mol Ecol 18: 5207–5217.
- 88. Ford JKB, Ellis GM, Matkin CO, Wetklo MH, Barrett-Lennard LG, et al. (2011) Shark predation and tooth wear in a population of northeastern Pacific killer whales. Aquat Biol 11: 213–224.
- 89. Brochu CA (1996) Closure of neurocentral sutures during crocodilian ontogeny: implications for maturity assessment in fossil archosaurs. J Vert Paleontol 16: 49–62.
- 90. Irmis RB (2007) Axial skeleton ontogeny in the Parasuchia (Archosauria: Pseudosuchia) and its implications for ontogenetic determination in archosaurs. J Vert Paleontol 27: 350–61.
- 91. Delfino M, Dal Sasso C (2006) Marine reptiles (Thalattosuchia) from the Early Jurassic of Lombardy (northern Italy). Géobios 39: 346–54.
- 92. Noè LF, Liston J, Evans M (2003) The first relatively complete exoccipital-opisthotic from the braincase of the Callovian pliosaur, Liopleurodon. Geol Mag 140: 479–486.
- 93. Benton MJ, Clark JM (1988) Archosaur phylogeny and the relationships of Crocodylia. In: Benton MJ, editor. The phylogeny and classification of the tetrapods. Oxford: Clarendon Press. 295–338.
- 94. Clark JM (1994) Patterns of evolution in Mesozoic Crocodyliformes. In: Fraser NC, Sues H-D, editors. In the shadows of dinosaurs: early Mesozoic tetrapods. London: Cambridge University Press. 84–97.
- 95. Ortega F, Gasparini ZB, Buscalioni AD, Calvo JO (2000) A new species of Araripesuchus (Crocodylomorpha, Mesoeucrocodylia) from the Lower Cretaceous of Patagonia (Argentina). J Vert Paleontol 20: 57–76.
- 96. Bonaparte JF (1991) Los vertebrados fosiles de la Formacion Rio Colorado, de la Ciudad de Neuquen y cercanias, Cretacico Superior, Argentina. Rev Mus Argent Cienc Nat 4: 31–63.
- 97. Carvalho IS, Bertini RJ (1999) Mariliasuchus: um novo Crocodylomorpha (Notosuchia) do Cretáceo da Bacia Bauru, Brasil. Geol Colomb 24: 83–105.
- 98. Holliday CM, Witmer LM (2009) The epipterygoid of crocodyliforms and its significance for the evolution of the orbitotemporal region of eusuchians. J Vert Paleontol 29: 715–733.
- 99. Gasparini ZB, Paulina-Carabajal A, Chong G (2008) Un nuevo espécimen de cocodrilo marino del Jurásico Medio del norte de Chile: revalidación de Metriorhynchus westermanni (Crocodyliformes: Metriorhynchidae). Rev Geol Chile 35: 335–346.
- 100. Karl H-V, Gröning E, Brauckmann C, Knötschke N (2006) Revision of the genus Enaliosuchus Koken, 1883 (Archosauromorpha: Metriorhynchidae) from the Early Cretaceous of Northwestern Germany. Stud Geol Salmanticensia 42: 49–59.
- 101. Witmer LM, Ridgely RC, Dufeau DL, Semones MC (2008) Using CT to peer into the past: 3D visualization of the brain and ear regions of birds, crocodiles, and nonavian dinosaurs. In: Endo H, Frey R, editors. Anatomical imaging: towards a new morphology. Tokyo: Springer-Verlag. 67–87.
- 102. Wenz S (1968) Contribution a l’étude du genre Metriorhynchus. Crâne et moulage endocranien de Metriorhynchus superciliosus. Ann Paléontol 54: 148–191.
- 103. Hua S (1999) Le crocodilien Machimosaurus mosae (Thalattosuchia, Teleosauridae) du Kimméridgien du Boulonnais (Pas de Calais, France). Palaeontogr Abt A Paläozool-Stratigr 252: 141–170.
- 104. von Sömmerring ST (1816) Ueber die Lacerta gigantea der Vorwelt. Denkschr K Akad Wiss Munchen. Kl Math Natwiss 6: 37–59.
- 105. Grubich JR, Rice AN, Westneat MW (2008) Functional morphology of bite mechanics in the great barracuda (Sphyraena barracuda). Zoology 111: 16–29.
- 106. McHenry CR, Clausen PD, Daniel WJT, Meers MB, Pendharkar A (2006) Biomechanics of the rostrum in crocodilians: a comparative analysis using finite-element modeling. Anat Rec 288: 827–849.
- 107. Rayfield EJ, Milner AC, Bui Xuan V, Young PG (2007) Functional morphology of spinosaur ‘crocodile-mimic’ dinosaurs. J Vert Paleontol 27: 892–901.
- 108. Rayfield EJ, Milner AC (2008) Establishing a framework for archosaurs cranial mechanics. Paleobiology 34: 494–515.
- 109. Frazzetta TH (1988) The mechanics of cutting and the form of shark teeth (Chondrichthyes, Elasmobranchii). Zoomorphology 108: 93–107.
- 110. Abler WL (1992) The serrated teeth of tyrannosaurid dinosaurs, and biting structures in other animals. Paleobiology 18: 161–183.
- 111. Fordyce RE (1982) Dental anomaly in a fossil squalodont dolphin from New Zealand, and the evolution of polydonty in whales. N Z J Zool 9: 419–426.
- 112. Spitz J, Cherel Y, Bertin S, Kiszka J, Dewez A, et al. (2011) Prey preferences among the community of deep-diving odontocetes from the Bay of Biscay, Northeast Atlantic. Deep-Sea Res Par I Oceanogr Res Pap 58: 273–282.
- 113. Prasad GVR, de Lapparent de Broin F (2002) Late Cretaceous crocodile remains from Naskal (India): comparisons and biogeographic affinities. Ann Paléontol 88: 19–71.
- 114. Vignaud P (1997) La morphologie dentaire des Thalattosuchia (Crocodylia, Mesosuchia). Palaeovertebrata 26: 35–59.
- 115. Werth AJ (2006) Mandibular and dental variation and the evolution of suction feeding in Odontoceti. J Mammal 87: 579–588.
- 116. Fitzgerald EMG (2012) Archaeocete-like jaws in a baleen whale. Biol Lett 8: 94–96.
- 117. McGowan C (1997) The taxonomic status of the Late Jurassic ichthyosaur Grendelius mordax: A preliminary report. J Vert Paleontol 17: 428–430.
- 118. Delair JB (1960) The Mesozoic reptiles of Dorset: Part Three, Conclusion. Proc Dorset Nat Hist Archaeol Soc 79: 59–85.
- 119. Noè LF, Smith DTJ, Walton DI (2004) A new species of Kimmeridgian pliosaur (Reptilia; Sauropterygia) and its bearing on the nomenclature of Liopleurodon macromerus. Proc Geol Assoc 115: 13–24.
- 120. Sassoon J, Noè LF, Benton MJ (2012) Cranial anatomy, taxonomic implications and paleopathology of an Upper Jurassic pliosaur (Sauropterygia) from Westbury, Wiltshire, UK. Palaeontology 55: 743–773.
- 121. Taylor MA, Cruickshank ARI (1993) Cranial anatomy and functional morphology of Pliosaurus brachyspondylus (Reptilia: Plesiosauria) from the Upper Jurassic of Westbury, Wiltshire. Philos Trans R Soc Lond B Biol Sci 341: 399–418.
- 122. Ainsworth C, Ferriss B, Leblond E, Guénette S (2001) The Bay of Biscay, France: 1998 and 1970 models. In: Guénette S, Christensen V, Pauly D, editors. Fisheries Centre Research Reports, volume 9. Vancouver: University of British Columbia. 271–313.