Carnivorous pitcher plants capture prey with modified leaves (pitchers), using diverse mechanisms such as ‘insect aquaplaning’ on the wet pitcher rim, slippery wax crystals on the inner pitcher wall, and viscoelastic retentive fluids. Here we describe a new trapping mechanism for Nepenthes gracilis which has evolved a unique, semi-slippery wax crystal surface on the underside of the pitcher lid and utilises the impact of rain drops to ‘flick’ insects into the trap. Depending on the experimental conditions (simulated ‘rain’, wet after ‘rain’, or dry), insects were captured mainly by the lid, the peristome, or the inner pitcher wall, respectively. The application of an anti-slip coating to the lower lid surface reduced prey capture in the field. Compared to sympatric N. rafflesiana, N. gracilis pitchers secreted more nectar under the lid and less on the peristome, thereby directing prey mainly towards the lid. The direct contribution to prey capture represents a novel function of the pitcher lid.
Citation: Bauer U, Di Giusto B, Skepper J, Grafe TU, Federle W (2012) With a Flick of the Lid: A Novel Trapping Mechanism in Nepenthes gracilis Pitcher Plants. PLoS ONE 7(6): e38951. doi:10.1371/journal.pone.0038951
Editor: Jeff Ollerton, University of Northampton, United Kingdom
Received: February 7, 2012; Accepted: May 16, 2012; Published: June 13, 2012
Copyright: © 2012 Bauer et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Funding: This work was funded by a Henslow Research Fellowship of the Cambridge Philosophical Society and a field work grant by the Charles Slater Fund, Cambridge, to UB. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Competing interests: The authors have declared that no competing interests exist.
Carnivorous pitcher plants have recently emerged as a model system for studying the evolution of functional traits in plant morphology in an ecological context –. Members of the paleotropical genus Nepenthes capture prey with specialised, highly modified leaves (pitchers) acting as passive pitfall traps . Most species produce two morphologically distinct pitcher types: ‘lower’ pitchers that usually rest on the ground and develop on immature rosette plants, and hanging ‘upper’ pitchers on climbing vines. Each pitcher consists of the main pitcher body, partly filled with digestive fluid, a collar-like upper rim (peristome), and the pitcher lid which in most species forms a ‘roof’ above the pitcher opening, protecting the pitcher from being flooded by rain.
Pitchers of all Nepenthes species secrete nectar to attract insect prey . Extrafloral nectaries are scattered across the outside of the pitcher and both the upper and lower lid surface, and are densely packed around the inner margin of the peristome. The quantity of nectar secreted on different parts of the pitcher (and other parts of the plant) varies with pitcher development, and between species , . In fully developed, open pitchers (i.e. functional traps) the largest quantities of nectar are secreted on the peristome and under the pitcher lid .
A number of distinct trapping mechanisms have been described, such as specialised slippery surfaces on the peristome  and the inner pitcher wall , , as well as viscoelastic pitcher fluids . The peristome is highly wettable and under humid conditions, thin stable water films form on the surface, rendering it extremely slippery . Due to its wetness-dependence, the peristome only activates the trap intermittently, and visiting insects can safely harvest nectar during inactive (i.e. dry) times . By this means, the plant may promote the survival of ‘scout’ ants that ultimately recruit larger numbers of worker ants to the trap.
The slipperiness of the inner wall is based on a dense layer of platelet-shaped wax crystals that are orientated perpendicularly to the surface. These crystals drastically reduce the available contact area for insect adhesive pads . In addition, the platelets have been reported to break off easily and contaminate the insects' adhesive pads , . The wax crystal layer is a common feature of many Nepenthes although there are several species in which it is reduced or absent , . N. gracilis is unusual in that it has wax crystals not only on the inner pitcher wall but also on the underside of the pitcher lid (Fig. 1A). This characteristic prompted us to investigate whether the lid is involved in prey capture in this species.
(A) N. gracilis pitcher with visiting Polyrhachis pruinosa ant, showing the epicuticular wax crystal surfaces on the inner pitcher wall and on the underside of the pitcher lid. (B) The horizontal orientation directly above the pitcher opening puts the lower lid surface in an ideal position for prey capture.
We observed that ants harvesting nectar from the lower lid surface of N. gracilis in the field (in Brunei, Northern Borneo) were able to walk upside down on the wax crystal surface without difficulty, while the same ants would slip and fall from the waxy inner pitcher wall. Nevertheless, the presence of such a unique structure strongly suggested a trapping function. A casual observation of a Coccinellid beetle being flicked into a N. gracilis pitcher by a raindrop after seeking shelter under the pitcher lid prompted us to hypothesise that the wax crystal layer, while providing a secure foothold under normal conditions, causes insects to detach more easily under sudden impacts. The horizontal orientation of the lid directly above the pitcher opening (Fig. 1B) and its comparatively high stiffness could further aid this trapping function. Field observations of increased prey numbers in N. gracilis pitchers after rainy days (C. Clarke, personal communication) support this idea; however, they might as well be due to the increased trapping efficiency of the peristome under wet conditions. We therefore investigated the role of the N. gracilis lid for prey capture in the laboratory and in the field, and characterised the detailed structure of the wax crystal surface using scanning electron microscopy (SEM).
The impact of heavy ‘rain’ drops causes ants to fall from the lower lid surface of N. gracilis
In the laboratory, we allowed Crematogaster sp. ants (a common prey species of N. gracilis at our study site) to forage on freshly harvested pitchers. Rain was simulated using an infusion drip system (Fig. 2A; see Methods). The effect was striking: 40.61±9.62% of all ants visiting the lower lid surface were knocked off by the impact of ‘rain’ drops and fell into the pitcher (Video S1). In contrast, not a single ant fell from the lid before or after the simulation of rain, confirming that the slipperiness of the lower lid surface was not altered by the increase of humidity after the ‘rain’. This result was not changed when an isolated pitcher lid (mounted horizontally using a paper clip) was tested: in this case 44% (11 of 25) ants were knocked off by ‘rain’ drops (Video S2). Ants were observed to be relatively ‘safe’ when holding onto the thicker mid-rib and get knocked off more frequently when they were positioned further out towards the (thinner) sides of the lid. Whether this was due to the mid-rib providing additional grip or to the dampened impact of the rain drops in this thicker section of the lid is not clear.
(A) Experimental setup to test how rain drops falling onto the pitcher lid affect ant capture. (B) Proportion of ant visitors to each pitcher surface that fell into the pitcher, under ‘dry’, ‘raining’, and ‘wet’ treatment condition, respectively. The interaction of pitcher surface and experimental condition was highly significant (P<0.001).
N. gracilis pitchers rely on different trapping surfaces under different weather conditions
We investigated the contribution of each surface (inner wall, lower lid surface, peristome) under different experimental conditions (before/during/after simulated rain). We found a highly significant dependence of the surfaces' trapping efficiency on the experimental conditions (ANOVA comparing two separate Generalised Linear Mixed Models, for details see Methods, df = 4, χ2 = 185.97, P<0.001; Fig. 2B). Ants fell from the lower lid surface only under the impact of simulated ‘rain’ drops, in which case up to 57% of the visitors were captured. The (weather-independent) wax crystal layer on the inner pitcher wall provided a low but more or less constant baseline trapping efficiency (c. 7%). The peristome was not slippery when dry but reached high efficiency (up to 80%) under wet conditions. In our experiment, the peristome became slippery approximately 2–3 min after the start of the simulated rain, and stayed slippery for 7–10 min after we stopped the dripping.
The lid of N. gracilis pitchers contributes to natural prey capture in the field
We tested the biological relevance of the lid capture mechanism by comparing prey numbers between an untreated control and pitchers with experimentally modified lids (underside coated with a thin layer of a non-toxic, transparent silicon polymer). Ants are able to walk on this polymer surface under both wet and dry conditions. The ‘anti-slip coating’ of the lower lid surface caused a significant reduction of captured prey in the field (Mann-Whitney U test, n1/2 = 15, Z = 1.97, P<0.05; Fig. 3). Prey numbers over the course of the experiment (19 days) were highly variable both between pitchers and between sampling intervals (3 days). Remarkably, the lid manipulation did not render pitchers completely ineffective: all pitchers did capture some prey over the course of the experiment. This indicates that the pitchers were still able to trap prey with the peristome and the inner wall.
The natural prey capture rate of pitchers with a non-slippery PDMS coating applied to the lower lid surface is reduced in comparison to the untreated control group (*: P<0.05).
N. gracilis has evolved two structurally and functionally different wax crystal surfaces
Scanning electron micrographs of the inner pitcher wall and underside of the pitcher lid revealed that both wax crystal surfaces are radically different in structure. The inner wall surface (Fig. 4A–B) was similar in morphology to wax crystal surfaces studied in other Nepenthes species, with a continuous, 3.05±0.36 µm (mean ± s.d., n = 21) thick layer of leaf-like wax platelets connected to an underlying matrix of shorter wax crystals , . In contrast, the lower lid surface (Fig. 4C–D) was covered with discrete, pillar-like wax structures, 1.78±0.36 µm (mean ± s.d., n = 18) in height and 1.57 µm (median, range = 3.45 µm, n = 37) in diameter. The individual micropillars were unevenly distributed across the surface and sometimes densely clustered so that they appeared merged into solid blocks. The cuticular surface in between the micropillars was perfectly smooth and free of any crystal structures (Fig. 4C). The largest gaps between (clusters of) micropillars were typically 2.34±0.62 µm (mean ± s.d., n = 17) wide.
(A–B) Microstructure of the crystalline wax layer on the inner pitcher wall. (A) Top view, showing a dense network of thin, upright wax platelets (scale bar: 5 µm). The freeze-fracture side view (B) reveals the internal organisation of the surface (scale bar: 2 µm). (C–D) Microstructure of the lower lid surface. (C) Top view: the wax crystals form solid, pillar-like structures, unevenly distributed across the surface and surrounded by smooth cuticle (scale bar: 5 µm). (D) Side view of the wax pillars (scale bar: 2 µm).
Investment in prey attraction by N. gracilis is concentrated on the pitcher lid
We compared the nectar production of N. gracilis and N. rafflesiana (without wax crystals under the lid) in the same field site, sampling every second day from both peristome and lower lid surface over a period of two weeks. The median area-specific daily amount of sugar secreted on the lower lid surface was 3.4 times higher in N. gracilis than in N. rafflesiana (Mann-Whitney U test, n1 = 9, n2 = 10, Z = 3.184, P<0.01; Fig. 5). In contrast, N. rafflesiana pitchers secreted slightly higher amounts of sugar onto the peristome; however, this difference was not statistically significant (Mann-Whitney U test, n1/2 = 10, Z = 1.285, P = 0.2).
The trapping function of the lower lid surface in N. gracilis constitutes a new trapping mechanism that has not been described previously. So far, the lid was only thought to play a role in prey attraction and as a protection against rain that would otherwise dilute the pitcher fluid . The precarious position directly above the pitcher opening (Fig. 1B), however, makes the lower lid surface highly suitable as a trapping device. Our experiments have demonstrated the effectiveness of the lid trapping mechanism for ants, but we have observed it to work for beetles (Coccinellidae) and flies (Musca domestica) as well (Video S3).
The microroughness created by the wax pillars is likely to reduce the contact area between the ants' smooth adhesive pads and the lid surface . However, some of the gaps between the micropillars may be large enough (≥3 µm) for ant claws to interlock , . Furthermore, the compact, clustered arrangement of the micropillars should render them less likely to break under the claw-induced stress. Effective claw use may explain the observed good walking performance of ants in the absence of rain impact.
Intermittent slipperiness of the peristome has been suggested as a strategy to ensure the survival of ‘scout’ ants and promote subsequent recruitment or worker ants to the pitcher. The lid capture mechanism may have a similar effect on the recruitment of social insects to the nectaries under the lid. Rainfalls in the distributional range of N. gracilis (Borneo, Sumatra, Malay Peninsula and central Sulawesi ) are typically brief and heavy with intensities of up to over 90 mm h−1 and most rain falling within less than one hour , . The lower lid surface is therefore a safe place to forage for most of the time. The marginally significant reduction of trapping success by the ‘anti-slip coating’ on the lower lid surface, despite the presence of other effective trapping mechanisms, indicates an important contribution of the lid towards natural prey capture in N. gracilis. It is currently not clear whether this mechanism is a unique feature of N. gracilis or a more widespread phenomenon in Nepenthes. A similar manipulation of the lid in N. rafflesiana pitchers in a recent study did not show an effect on prey capture , and wax crystals are absent from the lower lid surface of this species. Thus, it is likely that the wax micropillars are crucial for the trapping function of the lid in N. gracilis.
Our results suggest that N. gracilis has not only evolved special morphological adaptations to capture prey with the pitcher lid, but has also adjusted its nectar secretion patterns to increase prey attraction to the lower lid surface. The peristome of N. gracilis pitchers, although fully functional (Fig. 2B), is very narrow, and larger insects can easily use their claws to hold on to its outer edge while harvesting nectar (Fig. 1A). It has recently been demonstrated that many Nepenthes species have specialised to prioritise either the peristome or the inner wall for trapping, manifested in two extreme pitcher morphologies: strongly enlarged peristomes and smooth inner walls on one hand, and narrow peristomes and well-developed wax crystal layers on the other . N. gracilis has further specialised by evolving a new type of wax crystal surface under the pitcher lid. These wax crystals appear to provide the right level of slipperiness to cause insects to fall into the pitcher when the lid vibrates while allowing them to approach the nectaries safely at other times. Further experiments and field studies should be conducted to elucidate the detailed biomechanical underpinnings of this new trapping mechanism, and to investigate what implications it has for the prey spectrum of N. gracilis.
Materials and Methods
Permission to conduct field research in Brunei Darussalam was granted through the appointment of UB as a research associate with University Brunei Darussalam. No further permits were required as the study was conducted on publicly owned, not protected land. N. gracilis and N. rafflesiana are not protected under Brunei law. CITES export (No. BA/MAP/02/1003) and import (No. 358814/05) permits were obtained to export plant material for SEM analysis.
Plant material and field site
The study was conducted in the Tutong district of Brunei, Northern Borneo, in July 2011. Our field site was a heavily degraded roadside habitat with open, shrub-dominated vegetation over white silica sands. Both N. gracilis and N. rafflesiana are highly abundant in this site while the hybrid N. gracilis × N. rafflesiana is rare. All experiments were performed on upper pitchers of N. gracilis, using either live pitchers in the field, or freshly collected pitchers in the laboratory. Upper pitchers of N. rafflesiana were used for comparison in the measurements of nectar production. Plant material for SEM analysis was obtained from the field (two pitchers from different plants) and from the Royal Botanic Gardens of Kew (three pitchers from two different clones/three individual plants).
Effect of simulated rain on the capture efficiency of N. gracilis pitchers
Five upper pitchers were tested under three different conditions: dry, during and directly after simulated rain. Each pitcher was collected from the field immediately (<30 min) before the start of the experiment by cutting the leaf at the base. In the laboratory, the leaf was fixed to a tripod stand to simulate the natural orientation of both leaf and pitcher. A colony of Crematogaster sp. ants was collected from the same field site three days in advance and kept in a plastic container. The ants were given access to the experimental pitcher via a wooden skewer and immediately started to recruit workers to forage on the secreted nectar.
Rain was simulated experimentally using an Exadrop™ drip infusion system with a precision flow control (B. Braun, Melsungen) attached to a 1.5-litre plastic bottle with distilled water. The outlet of the drip tube was fixed to a standard photographic tripod and positioned in 50 cm distance directly above the pitcher lid (Fig. 2A). The drip frequency was adjusted to 0.22–0.32 s−1. The simulated rain drops had a mass of 38–44 mg (range of n = 60 droplets), corresponding to a spherical drop diameter of 4.2–4.4 mm, and reached a velocity of 3.0±0.3 m s−1 (mean ± s.d. from n = 10 droplets measured using an A-602f Basler camera at 304 frames per second) which is roughly one third of the terminal velocity for that drop size . For comparison, most rain drops in tropical rains are typically between 1.5 and 3 mm in diameter, and frequently reach >4 mm at the leading edge of storms or after interception by vegetation , . The impact momentum of our simulated droplets (0.125 g m s−1) is within the range of natural rain (0.028–0.60 g m s−1) .
A digital video camera (Sony DCR-SR35E) was positioned in front of the pitcher so that a full size view of the peristome and the underside of the pitcher lid could be recorded. The foraging ants were observed and videotaped for a total of 30 min on each pitcher, 10 min each before, during and directly after simulated rain. Videos were analysed by counting the number of falls from each surface (underside of the lid, peristome, and inner pitcher wall) in relation to the number of visitors on the respective surface. Since the inner pitcher wall bears no nectaries it is not normally visited by foraging ants, but ants foraging on the peristome nectaries occasionally stray out onto the inner wall and get trapped. We therefore counted the number of falls from both peristome and inner pitcher wall in relation to the number of visitors on the peristome.
An additional experiment was performed on an isolated N. gracilis lid that was fixed in natural horizontal orientation on a tripod using a paper clip. Crematogaster sp. ants were given access to the lid as described above for the whole pitcher. We videotaped the performance of the ants on the lower lid surface while simulating rain with the above described drip method.
Anti-slip coating of the lower lid surface of naturally growing pitchers
Thirty N. gracilis pitchers (each on a different plant) were labelled in the field and randomly assigned to an experimental or a control group. Using a fine paint brush, a thin layer of a non-toxic, transparent and odourless PDMS polymer (Sylgard™ 184, Dow Corning, Midland) was applied to the lower lid surface of the pitchers in the experimental group. Sylgard™ 184 has been shown to have no measurable effect on insect attraction but provide a hydrophobic, non-slippery surface for insects .
All prey was removed from the pitchers and the fluid was filtered through a Nuclepore™ track edge membrane filter (25 mm diameter, 12 µm pore size, Dow Corning). A small polyurethane cone (cut from a commercial ear plug) was inserted into the tapered bottom end of the pitcher to prevent the loss of prey. Prey was sampled every third day for a total of 19 days by sucking out the pitcher fluid using a 10 mL syringe with an attached silicone tube, transferring the fluid to a petri dish, and removing all prey manually with a pair of fine spring steel tweezers.
Comparison of the wax crystal structure on the lid and the inner pitcher wall
Five N gracilis upper pitchers were collected in airtight plastic bags and transported in a cool box to the laboratory where they were quench-frozen (3–4 hours after collection) in liquid propane cooled in liquid nitrogen. Approximately 1 cm2 pieces of the pitcher lid and inner pitcher wall were cut with a razor blade, freeze-dried, mounted on SEM stubs and sputter-coated with a 20 nm layer of gold. Alternatively, samples were freeze-fractured before freeze-drying. The microstructure of the wax crystal layers on the lower lid surface and inner wall surface was examined using a Philips FEI XL30-FEG SEM with an accelerating voltage of 5.0 kV.
Measurement of nectar production in the field
In a plot of approximately 15×50 m, 10 pitchers each of N. gracilis and N. rafflesiana, each on a different plant, were labelled and roofed with transparent sheets of stiff plastic foil to protect the nectar from being washed off by rain. To prevent insects from collecting the nectar, we applied sticky Tangletrap™ resin to the base of the leaf and enclosed each pitcher in a fine-mesh gauze bag. At the start of the experiment, we removed all nectar from the peristome and lower lid surface by repeatedly wiping the surface with approximately 1 cm2 sized squares of wet laboratory wipe (Kimwipe™, Kimberley-Clarke, Reigate) held with a pair of self-closing blunt forceps.
Nectar from both the peristome and the lower lid surface was sampled every second day over a period of two weeks. Samples were obtained by moistening the surface with a wet Kimwipe™ square and then wiping it with a dry piece of a highly absorbent medical swap (Sugi™, Kettenbach Medical, Eschenburg) made from cotton and cellulose. Individual Sugi™ swaps were cut into 3–4 small pieces to minimise the use of absorbent material, and were handled using forceps and latex gloves to avoid contamination. Samples from the peristome and from the lid of both Nepenthes species were collected separately in Eppendorff tubes and dried over silica gel for 5–7 days. The completely dried samples were re-diluted in the smallest possible amount of distilled water (between 0.1 and 0.6 mL) depending on the amount of absorbent material used, and the sugar content was measured with a handheld refractometer (ATAGO, L. Kübler, Karlsruhe).
The measured sugar secretion was corrected for the varying area of the sampled surfaces to allow for a direct comparison between the two Nepenthes species regardless of their different pitcher size and geometry. Surface areas were measured after the final nectar sampling by mounting the surfaces flat (cut in smaller pieces where necessary) on graph paper, pressing them down with a glass plate, and taking a photograph from above. The areas were then measured digitally using Scion Image (release Alpha 22.214.171.124, Scion Corporation, Frederick) software.
Statistical analysis of data
Statistical tests were conducted using the software packages BiAS. for Windows and R. Data were tested for normality using Shapiro-Wilks tests, and non-parametric tests were used were appropriate. Throughout the paper, descriptive statistics denote mean ± s.d. for normally distributed data and median and range in all other cases. Effects were considered significant when P<0.05.
To analyse the results of the rain simulation experiment, General Linear Mixed Models (GLMMs, appropriate for proportional count data) were fitted to the data. The experimental conditions (before/during/after simulated rain) and the individual surfaces (peristome, lower lid surface, inner pitcher wall) were considered fixed factors. To improve the accuracy of the model, ‘surface’ (nested in the random factor ‘pitcher’) was also included as a nested random factor. We calculated two separate GLMMs, with and without interaction of the fixed factors. In a second step, a conventional one-way ANOVA was performed to compare both models: significant differences between the models indicate a significant fixed factor interaction.
Effect of simulated rain on ants foraging on the underside of the pitcher lid of N. gracilis.
Effect of simulated rain on ants foraging on the underside of an isolated N. gracilis pitcher lid.
High-speed video recording (recording frame rate: 428 s−1, playback frame rate: 10 s−1) of a house fly ( Musca domestica ) being knocked off the underside of an N. gracilis lid by a simulated rain drop and captured.
The authors would like to thank the Royal Botanical Gardens at Kew for kindly providing plant material, and the B. Braun Melsungen AG for providing the drip systems used to simulate rain. We are grateful to University Brunei Darussalam, Mr Harith Tinggal and family, and Dr Dan Thornham for logistic support during the field work. Dr Charles Clarke contributed thoughts and observations in fruitful discussions. Dr Francisco Rodriguez-Sanchez gave valuable advice on the use of GLMM statistics to analyse our data.
Conceived and designed the experiments: UB BDG WF. Performed the experiments: UB. Analyzed the data: UB. Contributed reagents/materials/analysis tools: JS TUG. Wrote the paper: UB WF. Prepared samples for analysis: JS.
- 1. Ellison AM, Gotelli NJ (2009) Energetics and the evolution of carnivorous plants – Darwin's ‘most wonderful plants in the world’. J Exp Bot 60: 19–42.
- 2. Chin L, Moran JA, Clarke C (2010) Trap geometry in three giant montane pitcher plant species from Borneo is a function of tree shrew body size. New Phytol 186: 461–470.
- 3. Moran JA, Hawkins BJ, Gowen BE, Robbins SL (2010) Ion fluxes across the pitcher walls of three Bornean Nepenthes pitcher plant species: flux rates and gland distribution patterns reflect nitrogen sequestration strategies. J Exp Bot 61: 1365–1374.
- 4. Bauer U, Grafe TU, Federle W (2011) Evidence for alternative trapping strategies in two forms of the pitcher plant, Nepenthes rafflesiana. J Exp Bot 62: 3683–3692.
- 5. Bauer U, Clemente CJ, Renner T, Federle W (2012) Form follows function: morphological diversification and alternative trapping strategies in carnivorous Nepenthes pitcher plants. J Evol Biol 25: 90–102.
- 6. Bonhomme V, Pelloux-Prayer H, Jousselin E, Forterre Y, Labat J-J, et al. (2011) Slippery or sticky? Functional diversity in the trapping strategy of Nepenthes carnivorous plants. New Phytol 191: 545–554.
- 7. Grafe TU, Schöner CR, Kerth G, Junaidi A, Schöner MG (2011) A novel resource-service mutualism between bats and pitcher plants. Biol Lett 7: 436–439.
- 8. Juniper BE, Robins RJ, Joel DM (1989) The carnivorous plants. London: Academic Press.
- 9. Merbach MA, Zizka G, Fiala B, Maschwitz U, Booth WE (2001) Patterns of nectar secretion in five Nepenthes species from Brunei Darussalam, Northwest Borneo, and implications for ant-plant relationships. Flora 196: 153–160.
- 10. Bauer U, Willmes C, Federle W (2009) Effect of pitcher age on trapping efficiency and natural prey capture in carnivorous Nepenthes rafflesiana plants. Ann Bot 103: 1219–1226.
- 11. Bohn HF, Federle W (2004) Insect aquaplaning: Nepenthes pitcher plants capture prey with the peristome, a fully wettable water-lubricated anisotropic surface. PNAS 101: 14138–14143.
- 12. Knoll F (1914) Über die Ursache des Ausgleitens der Insektenbeine an wachsbedeckten Pflanzenteilen. Jahrb Wiss Bot 54: 448–497.
- 13. Juniper BE, Burras JK (1962) How pitcher plants trap insects. New Scientist 13: 75–77.
- 14. Gaume L, Forterre Y (2007) A viscoelastic deadly fluid in carnivorous pitcher plants. PLoS ONE 2: e1185.
- 15. Bauer U, Bohn HF, Federle W (2008) Harmless nectar source or deadly trap: Nepenthes pitchers are activated by rain, condensation and nectar. Proc R Soc B 275: 259–265.
- 16. Scholz I, Bückins M, Dolge L, Erlinghagen T, Weth A, et al. (2010) Slippery surfaces of pitcher plants: Nepenthes wax crystals minimize insect attachment via microscopic surface roughness. JEB 213: 1115–1125.
- 17. Gorb E, Haas K, Henrich A, Enders S, Barbakadze N, et al. (2005) Composite structure of the crystalline epicuticular wax layer of the slippery zone in the pitchers of the carnivorous plant Nepenthes alata and its effect on insect attachment. JEB 208: 4651–4662.
- 18. Clarke C (1997) Nepenthes of Borneo. Kota Kinabalu: Natural History Publications.
- 19. Dai Z, Gorb SN, Schwarz U (2002) Roughness-dependent friction force of the tarsal claw system in the beetle Pachnoda marginata (Coleoptera, Scarabaeidae). JEB 205: 2479–2488.
- 20. Bidin K, Chappell NA (2006) Characteristics of rain events at an inland locality in northeastern Borneo, Malaysia. Hydrol Process 20: 3835–3850.
- 21. Cranbrook G G-H Earl of, Edwards DS (1994) Belalong: a tropical rainforest. London: Royal Geographical Society; Singapore: Sun Tree Publishing.
- 22. Gunn R, Kinzer GD (1949) The terminal velocity of fall for water droplets in stagnant air. J Meteor 6: 243–248.
- 23. Ulbrich CW, Atlas D (2007) Microphysics of raindrop size spectra: tropical continental and maritime storms. J Appl Meteor Climatol 46: 1777–1791.
- 24. Brandt CJ (1989) The size distribution of throughfall drops under vegetation canopies. Catena 16: 507–524.
- 25. Kimble P (1996) Measuring the momentum of throughfall drops and raindrops. Masters thesis (Western Kentucky University). Available: http://digitalcommons.wku.edu/theses/806.