Browse Subject Areas

Click through the PLOS taxonomy to find articles in your field.

For more information about PLOS Subject Areas, click here.

  • Loading metrics

Optimisation of Bioluminescent Reporters for Use with Mycobacteria

  • Nuria Andreu,

    Affiliation Department of Medicine, Imperial College London, London, United Kingdom

  • Andrea Zelmer,

    Affiliation Department of Infectious and Tropical Diseases, London School of Hygiene and Tropical Medicine, London, United Kingdom

  • Taryn Fletcher,

    Affiliation Department of Medicine, Imperial College London, London, United Kingdom

  • Paul T. Elkington,

    Affiliation Department of Medicine, Imperial College London, London, United Kingdom

  • Theresa H. Ward,

    Affiliation Department of Infectious and Tropical Diseases, London School of Hygiene and Tropical Medicine, London, United Kingdom

  • Jorge Ripoll,

    Affiliation Institute of Electronic Structure and Laser, Foundation for Research and Technology-Hellas, Heraklion, Crete, Greece

  • Tanya Parish,

    Affiliations Barts and the London School of Medicine and Dentistry, Queen Mary University of London, London, United Kingdom, Infectious Diseases Research Institute, Seattle, Washington, United States of America

  • Gregory J. Bancroft,

    Affiliation Department of Infectious and Tropical Diseases, London School of Hygiene and Tropical Medicine, London, United Kingdom

  • Ulrich Schaible,

    Affiliations Department of Infectious and Tropical Diseases, London School of Hygiene and Tropical Medicine, London, United Kingdom, Department of Molecular Infection Research, Research Center Borstel, Borstel, Germany

  • Brian D. Robertson,

    Affiliation Department of Medicine, Imperial College London, London, United Kingdom

  • Siouxsie Wiles

    Affiliations Department of Infectious and Tropical Diseases, London School of Hygiene and Tropical Medicine, London, United Kingdom, Department of Molecular Medicine and Pathology, University of Auckland, Auckland, New Zealand

Optimisation of Bioluminescent Reporters for Use with Mycobacteria

  • Nuria Andreu, 
  • Andrea Zelmer, 
  • Taryn Fletcher, 
  • Paul T. Elkington, 
  • Theresa H. Ward, 
  • Jorge Ripoll, 
  • Tanya Parish, 
  • Gregory J. Bancroft, 
  • Ulrich Schaible, 
  • Brian D. Robertson



Mycobacterium tuberculosis, the causative agent of tuberculosis, still represents a major public health threat in many countries. Bioluminescence, the production of light by luciferase-catalyzed reactions, is a versatile reporter technology with multiple applications both in vitro and in vivo. In vivo bioluminescence imaging (BLI) represents one of its most outstanding uses by allowing the non-invasive localization of luciferase-expressing cells within a live animal. Despite the extensive use of luminescent reporters in mycobacteria, the resultant luminescent strains have not been fully applied to BLI.

Methodology/Principal Findings

One of the main obstacles to the use of bioluminescence for in vivo imaging is the achievement of reporter protein expression levels high enough to obtain a signal that can be detected externally. Therefore, as a first step in the application of this technology to the study of mycobacterial infection in vivo, we have optimised the use of firefly, Gaussia and bacterial luciferases in mycobacteria using a combination of vectors, promoters, and codon-optimised genes. We report for the first time the functional expression of the whole bacterial lux operon in Mycobacterium tuberculosis and M. smegmatis thus allowing the development of auto-luminescent mycobacteria. We demonstrate that the Gaussia luciferase is secreted from bacterial cells and that this secretion does not require a signal sequence. Finally we prove that the signal produced by recombinant mycobacteria expressing either the firefly or bacterial luciferases can be non-invasively detected in the lungs of infected mice by bioluminescence imaging.


While much work remains to be done, the finding that both firefly and bacterial luciferases can be detected non-invasively in live mice is an important first step to using these reporters to study the pathogenesis of M. tuberculosis and other mycobacterial species in vivo. Furthermore, the development of auto-luminescent mycobacteria has enormous ramifications for high throughput mycobacterial drug screening assays which are currently carried out either in a destructive manner using LuxAB or the firefly luciferase.


Mycobacterium tuberculosis was first isolated more than 125 years ago. Although a huge amount of research has been devoted to it over this time, tuberculosis still represents a major public health threat in many countries [1]. The main hindrances in fighting this disease include a lack of understanding of the human infection, its establishment and progression, as well as the host-pathogen interactions that determine the different outcomes. Furthermore, the treatment regimen of six months administration of up to four drugs has not evolved in more than four decades, and recent years have seen an alarming increase in multi-drug resistant (MDR) and extensively drug-resistant (XDR) strains. It is clear then that novel and imaginative approaches are needed to speed up both basic and translational research in tuberculosis, especially in the areas of vaccine and drug development.

Bioluminescence, the production of light by luciferase-catalysed reactions, is a versatile reporter technology with multiple applications both in vitro and in vivo. In vivo bioluminescence imaging (BLI) represents one of its most outstanding uses by allowing the non-invasive localisation of luciferase-expressing cells within an animal. Applied to the study of infectious diseases, BLI permits the detection of microorganisms from within living animals thus allowing the spatiotemporal study of infection in real-time in the same host [2]. Moreover, using luciferase as a reporter of gene expression, it is possible to establish when and where a gene function is needed, shedding light on bacterial pathogenesis [3], [4], [5]. Finally, BLI constitutes an easy and rapid method to test novel antimicrobial compounds in vivo [6], [7].

Luciferases are a large family of enzymes that catalyse the oxidation of a substrate, generically called luciferin, to yield oxyluciferin with the concomitant production of light. Three main luciferin-luciferase systems have been utilised for BLI [8]. The first system is represented by the firefly luciferase (FFluc) from Photinus pyralis which uses D-luciferin (a benzothiazole) as substrate, is dependent on ATP and results in the production of yellow-green light (557 nm). The second system includes the luciferases from the marine organisms Renilla reniformis (a cnidarian) and Gaussia princeps (a copepod) and the substrate coelenterazine. The signal produced by the G. princeps luciferase (Gluc) has been reported to be stronger than that of FFluc [9], even though the light emitted is in the blue range (480 nm) and is therefore more susceptible to tissue absorption and scattering. The fact that Gluc is strongly resistant to heat and extreme pH [9], [10], and that it is secreted by eukaryotic cells also make this system very attractive. Bacterial luciferases, found in the terrestrial bacterium Photorhabdus luminescens and marine bacteria from the genera Vibrio and Photobacterium, constitute the third luciferin-luciferase system. These luciferases are heterodimeric enzymes that use FMNH2 and a long-chain aldehyde as substrates. Bacterial luciferases are encoded by the genes luxAB that form an operon (luxCDABE) together with three additional genes (luxCDE) whose products synthesise the long-chain aldehyde. The main advantage of this system is that it does not need exogenously added substrate, but again the light produced is in the blue range (490 nm).

Bioluminescence has been used in mycobacterial research for more than 20 years. Initially, FFluc was used to measure ATP as an indirect method of assessing cell viability and cell numbers [11], [12]. Considering the long duplication times of mycobacteria, the advantages of using bioluminescence as a reporter to assay anti-mycobacterial agents soon became evident when compared to the more traditional colony count methods. To this end LuxAB (requiring the addition of exogenous substrate) and FFluc have been used in M. smegmatis, M. tuberculosis, M. bovis BCG, and even M. avium, M. intracellulare and M. aurum [13], [14], [15], [16], [17], [18], [19]. The development of luciferase reporter phages represented a further improvement as it enabled testing of the drug susceptibility of clinical strains and has subsequently been applied to tuberculosis diagnostics [20], [21], [22], [23], [24], [25], [26], [27]. Finally, luminescent reporter strains have also been used for antibiotic testing and immunity assessment in cell cultures and ex vivo in organ homogenates of infected mice [28], [29], [30], [31], [32], [33], [34], [35].

Despite the extensive use of luminescent reporters in mycobacteria, these have only recently been applied to the imaging of mycobacteria in vivo [36]. In the single published paper on BLI of mycobacteria, Heus and collaborators utilised a recombinant M. bovis BCG strain expressing luxAB to monitor mycobacteria infection in vivo. While the authors prove that BLI can be used to study bacterial dissemination, drug efficacy and the role of the immune response, their approach has some limitations. In fact, the authors failed to detect BCG in the lungs of infected mice despite being able to detect bacteria in these organs by colony counting and ex vivo imaging. Because their luminescent strain of BCG did not express the luxCDE genes for substrate synthesis, Heus and collaborators had to administer decanal to the mice in order to image the bacteria. This substrate is highly toxic and, although they were able to deliver it by injection into the murine peritoneum dissolved in a mixture of olive oil and ethanol, this delivery method would appear to have limited distribution to the lungs, which are of major importance for tuberculosis research.

In the work reported here, we have improved the signal obtained from FFluc and Gluc (both of which use non-toxic substrates), and Lux in mycobacteria using a combination of vectors, promoters, and codon-optimised genes. We report for the first time the functional expression of the whole Lux operon in M. tuberculosis and M. smegmatis thus allowing the development of auto-luminescent mycobacteria. Moreover, we demonstrate that FFluc and Lux are both useful for the non-invasive detection of mycobacteria in the lungs of infected mice.


Maximising luminescent reporter gene expression

As a first step towards the generation of highly-luminescent mycobacteria, each of the three luciferases was cloned into three different expression vectors that contained the same promoter (Phsp60) but which differ in copy number: (i) pSMT3, which has a pAL5000 replicon and is maintained at 2–5 copies per cell [37], [38]; (ii) pSMT3M [39], which has a mutation in the repA gene that increases the copy number to 32–64 copies [40]; and (iii) pMV306hsp which integrates into the chromosomal attB site and hence results in single copy number [38]. For the Lux reporter we used a luxABCDE operon that had been previously modified for expression in Gram positive bacteria by replacement of the ribosome binding sites and reorganisation of the genes [41]. All the constructs were electroporated into M. smegmatis, and the luminescence of 10 randomly selected clones was analysed for each type of construct (Fig. 1). For the three reporters, a high luminescent signal was produced by colonies expressing the integrated constructs derived from pMV306hsp with median values of 1.1×107 RLUs for FFluc, 8.9×106 RLUs for Gluc, and 3.6×104 RLUs for Lux. The pSMT3 derivatives also yielded good signal levels with Gluc (median value, 1.5×107 RLUs) and in three out of ten FFluc clones (4.5×105, 5.8×106 and 1.5×107 RLUs). Remarkably, a high variation was detected among the pSMT3+FFluc clones (signal range of 3.7×102–1.5×107 RLUs), with light production only slightly over the background in three of them (Fig. 1A); this is likely related to the fact that many of these clones carried deletions affecting the reporter gene (data not shown). For all three reporters, the lowest luminescence was obtained with pSMT3M, the high copy number vector. In particular, seven out of ten transformants carrying pSMT3M+FFluc and all the pSMT3M+Lux clones analysed produced only background levels of bioluminescence (Fig. 1A, C). Further screening of 96 pSMT3M+Lux transformants imaged with the IVIS® Spectrum failed to detect any bioluminescent clones. Similarly, out of 387 pSMT3+Lux transformants obtained, only 12 were glowing when imaged with the IVIS® Spectrum. However, these positive clones lost their luminescence after subculturing. Deletions of 5–6 kb, comprising almost the whole lux operon, were detected in these and the pSMT3M+Lux transformants (data not shown). Therefore the highest expression and stability was achieved with the pMV306hsp integrating vector, which was selected for further studies.

Figure 1. Expression from an integrating vector results in the highest and most stable bioluminescent signal.

To study the effect of copy number on light production each reporter was cloned into standard (pSMT3), high (pSMT3M), and single copy number (pMV306hsp) vectors. Luminescence was measured for 10 independent M. smegmatis transformants each carrying the FFluc (a), Gluc (b) and Lux (c) constructs. Results are given as relative light units (RLUs) and are corrected for the background. Overall differences between groups were assessed using the Kruskal–Wallis non-parametric test with differences between subgroups assessed by Dunn's multiple comparisons test and those found to be significant (p<0.01) are indicated with *.

Next, we tested different promoters to drive expression of the luciferase genes. Using the integrating vector pMV306, each reporter gene was cloned in front of previously described strong promoters: Phsp60, PmyctetO [42], and PG13 [43], [44]. These constructs were introduced into M. smegmatis, and the luminescence of 10 randomly selected transformants analysed (Fig. 2). Similar luminescence values were obtained among strains expressing either FFluc or Gluc under the control of either Phsp60 or PG13 (median values of 1.5×107 and 2.3×107 RLUs respectively for FFluc, 8.9×106 and 5.05×106 RLUs for Gluc), while production of light from PmyctetO clones was 3–13 times lower. In the case of Lux, the highest luminescence was achieved using Phsp60 (3.6×104 RLUs), followed by PG13 (9 times lower), and PmyctetO (180 times lower than that of Phsp60). Consequently Phsp60 was the promoter chosen for expression of the luminescent reporters. Additionally, in order to increase the amount of substrate synthesised by the Lux operon and in this way the amount of luminescence, PG13 was cloned in front of luxC in pMV306hsp+Lux. This resulted in a 6-fold increase in the luminescence activity compared to the original pMV306hsp+Lux, from 3.6×104 to 2.25×105 RLUs (Fig. 2C).

Figure 2. Expression of luciferases using promoters Phsp60 and PG13 leads to greater light production.

Luminescence of M. smegmatis expressing ffluc (a), gluc (b) and lux (c) was assayed using Phsp60, PmyctetO, and PG13 in the integrating vector pMV306. Each dot represents a randomly selected transformant. Results are given as relative light units (RLUs) and are corrected for the background. Statistical significance was evaluated by the Kruskal–Wallis test with subgroup analysis performed by Dunn's multiple comparison test and those found to be significant (p<0.05) are indicated with *.

Lastly, as a potential way of enhancing the expression of reporter genes at the translational level, we utilised versions of ffluc and gluc whose codon usage had been optimised for use in mycobacteria, together with an improved Shine Dalgarno sequence [45]. We also tested a lux operon with codon usage optimised for mycobacteria, but no luminescence was produced by this strain, even if the substrate for the bacterial luciferase was added exogenously (data not shown). Alternatively, we used a luxCDABE operon (LuxStm) codon-optimised for Streptomyces coelicolor [46]. Using pMV306hsp as the expression vector the luminescence of the optimised reporters was compared to that of the wild-type genes (Fig. 3). Codon optimisation resulted in a 30-fold, 2.5-fold and 4-fold improvement in the signal for FFluc, Gluc and Lux respectively. Accordingly, the optimised gluc and ffluc genes were selected for further study. However, since the luminescence of LuxStm was lower than that of the reorganised lux operon with PG13 cloned in front of luxC, the latter was chosen for further study.

Figure 3. Codon optimisation increases bioluminescence in vitro.

Relative light units (RLUs) were measured in 10 M. smegmatis clones transformed with a wild-type or a Mycobacterium optimised FFluc (a) or Gluc (b), or with a Gram positive or Streptomyces optimised Lux (c). In all cases pMV306hsp was used as backbone. Results are corrected for the background. Statistical significance was evaluated by the Mann-Whitney non-parametric test for FFluc and Lux, and by unpaired t test for Gluc (data normality passed) and those found to be significant (p<0.05) are indicated with *.

The three reporters were also tested in M. tuberculosis by electroporating pMV306hsp+FFluc, pMV306hsp+Gluc and pMV306hsp+Lux and measuring the bioluminescence of 10 randomly selected clones (Fig. 4). The signal obtained in M. tuberculosis was slightly lower than that of M. smegmatis for FFluc (1.1×107 and 1.5×107 RLUs, respectively), whereas no significant differences were detected for Gluc and Lux (5.8×105 vs. 8.4×105 RLUs, and 3.6×104 vs. 4.6×104 RLUs, correspondingly).

Figure 4. Bioluminescence levels in M. tuberculosis and M. smegmatis are comparable in vitro.

Relative light units (RLUs) were measured in 10 M. smegmatis and 10 M. tuberculosis clones transformed with pMV306hsp+FFluc (a), pMV306hsp+Gluc (b) or pMV306hsp+Lux (c). Results are corrected for the background. Statistical significance was evaluated by the Mann-Whitney non-parametric test for Lux, and by unpaired t test for FFluc and Gluc (data normality passed) and those found to be significant (p<0.05) are indicated with *.

Optimisation of the in vitro bioluminescence reaction

To achieve the highest signal to background ratio we tested different integration times (0.1–10 s) for the three reporters, at four different substrate concentrations for Gluc and FFluc (Fig. 5). As shown in Fig. 5A, increasing the integration time yielded an increased ratio for FFluc, reaching a maximal ratio at integration times between 5 and 10 s, depending on substrate concentration. This was also the case for Lux, with 10 s yielding the best result (Fig. 5C). In contrast, increasing the integration time resulted in a decreased signal to noise ratio for Gluc (Fig. 5B). This was likely due to the high background produced by auto-oxidation of its substrate coelenterazine [47]. Therefore, for further studies the integration times selected were 5 s, 0.1 s and 10 s for FFluc, Gluc and Lux respectively.

Figure 5. Signal:noise for FFluc and Lux increases with integration time, and decreases for Gluc.

Luminescence was measured using six different integration times and four different substrate concentrations for M. smegmatis producing FFluc (a) and Gluc (b), or without substrate for Lux (c). The background luminescence was obtained from cultures of M. smegmatis with the empty pMV306hsp. Assays were performed with three independent mid-log cultures and each culture was measured in duplicate. As the data was not normally distributed, median values are displayed (bar) with inter-quartile ranges (box), and highest and lowest values (whiskers).

We then studied the effect of substrate concentration on light production by FFluc and Gluc (Fig. 6). In both cases the luminescence increased with increasing substrate concentration in an exponential manner until a plateau was reached at 40 µM coelenterazine for Gluc and 1570 µM luciferin for FFluc, with 40 µM and 470 µm chosen as working concentrations.

Figure 6. Bioluminescence correlates with substrate concentration at low concentrations.

Luminescence (given as relative light units [RLUs]) of M. smegmatis pMVhsp+FFluc (a) and M. smegmatis pMVhsp+Gluc (b) was measured with integration times of 5 s and 0.1 s respectively. The substrate concentrations assayed ranged from 20 to 4710 µM luciferin for FFluc, and from 0.05 to 400 µM coelenterazine for Gluc. Means and standard deviations (smaller than symbols) of six replicates are shown.

Luminescence reaction kinetics

The kinetics of light output for each luciferase was measured for M. smegmatis pMVhsp+FFluc, pMVhsp+Gluc and pMVhsp+LuxAB+G13+CDE over 30 min, following the addition of substrate as appropriate (Fig. 7). For both Gluc and FFluc, the maximum signal was obtained immediately after substrate addition with median values of 2.9×105±8.9×103 RLUs for Gluc and 2.2×107±7.1×105 RLUs for FFluc. Then, Gluc luminescence decreased dramatically with a 90% loss in just 1 min, whereas the FFluc signal dropped slowly, still retaining 50% of the initial signal after 17 min. In contrast, the light output for Lux remained stable between 1.1×106 and 2.2×106 RLUs during the whole experiment, most likely reflecting a continuous production of substrate by the cells.

Figure 7. Light production from FFluc and Lux is stable, whereas the signal from Gluc rapidly dissipates.

Luminescence (given as relative light units [RLUs]) was measured every 10 s for gluc-expressing M. smegmatis and every 30 s for ffluc- or lux-expressing M. smegmatis, over a 30 min period. The integration times used were 0.1 s, 5 s and 10 s for Gluc, FFluc and Lux respectively. At time point 0 min, 470 µM luciferin or 40 µM coelenterazine were added to FFluc- and Gluc-producing M. smegmatis respectively. Two independent cultures were used for FFluc and Lux, and three for Gluc. Each culture was measured in duplicate and the means and standard deviations (smaller than symbols) are plotted.

We then analysed luminescence production during the growth of the same luciferase-producing strains (Fig. 8). The level of luminescence correlated well with cell density during the exponential growth phase for all the three reporters. However, the signal dropped when the cultures of lux- and ffluc-expressing cells entered stationary phase with a total loss of 83% and 77% respectively between the time points 12 and 28 h (Fig. 8A, C). This is most likely related to a decrease in the metabolic activity of the bacteria, and therefore in the availability of the FMNH2 and ATP needed by Lux and FFluc, respectively. In contrast, luminescence from cells expressing the Gaussia luciferase, which does not require any bacterial cofactors to catalyse the luminescence reaction, remained related to cell numbers until the end of the growth curve (Fig. 8B). Moreover, using mid-log cultures a good correlation (Spearman r = 1) was found between colony forming units (CFU) and luminescence (measured with the plate luminometer) over a range of cell numbers: 104 and 108 CFU for ffluc-expressing M. smegmatis, 103 and 108 for lux-expressing cells, and 104–106 for Gluc producing M. smegmatis (Fig. 8D–F).

Figure 8. Bioluminescence correlates with cell density during exponential growth in vitro.

Cultures of M. smegmatis pMVhsp+FFluc (a), pMVhsp+Gluc (b) and pMVhsp+Lux (c) were inoculated to an optical density (OD) at 600 nm of 0.1 and the OD and the luminescence [given as relative light units (RLUs)] measured over 28 h. The luminescence was measured with integration times of 5, 0.1, and 10 s respectively, and substrate concentrations of 470 µM luciferin for FFluc and 40 µM coelenterazine for Gluc. The values represented correspond to the means of two independent cultures measured in triplicate. The error bars indicate standard deviations. A near linear relationship was found between bioluminescence [given as RLUs] and colony counts (given as colony forming units [CFU]) for mid-log cultures of M. smegmatis pMVhsp+FFluc (d), pMVhsp+Gluc (e) and pMVhsp+Lux (f) using a plate luminometer.

Secretion of Gaussia luciferase

It has previously been stated that Gluc is secreted from eukaryotic cells because of a signal peptide situated at the N-terminal end of the protein [9]. To determine if Gluc was also secreted in M. smegmatis, we examined the luminescence produced by the whole culture, the cells or the culture supernatant. Moreover, as a way to assess the role of the signal peptide, experiments were also performed using strains expressing codon-optimised and wild-type forms of Gluc without the signal sequence. As shown in Fig. 9, almost 100% of the luminescence was detected in the supernatant of all gluc-expressing M. smegmatis regardless of the presence or absence of the signal peptide and the codon usage of the gene used. In contrast, only 2% of the total luminescence was found in the supernatant of FFluc-producing M. smegmatis when analysed in a similar way. Surprisingly, the light output from Gluc was higher when the signal peptide was deleted (Fig. 9), both for the Mycobacterium optimised (8.2×105±5.6×104 RLUs compared to 1.75×105±3.8×104 RLUs with signal peptide) and the wild-type genes (1.5×105±1.36×104 RLUs compared to 2.1×104±1.3×103 RLUs).

Figure 9. Gaussia luciferase is secreted from mycobacterial cells.

Luminescence (given as relative light units [RLUs]) was measured in culture, supernatant and cell samples of M. smegmatis producing Gluc Mycobacterium optimised with (GlucSS) or without (Gluc) signal peptide, Gluc wild-type with (GlucWT+SS) or without (GlucWT-SS) signal peptide, and FFluc as control. Assays were performed with three independent cultures and each culture was measured in duplicate. As the data was not normally distributed, median values are displayed (bar) with inter-quartile ranges (box), and highest and lowest values (whiskers).

Bioluminescence in vivo imaging

To assess if the signal produced by each of the three reporters could be detected in vivo, three or four Balb/c mice were endotracheally inoculated with 106–107 CFU of luminescent M. smegmatis and imaged 24 h later with the IVIS® Spectrum. The background level of luminescence was estimated by imaging two mice inoculated with the non-luminescent M. smegmatis pMV306hsp.

Two substrate concentrations and two routes of administration were assessed for FFluc: (i) 300 mg kg−1 body weight and 500 mg kg−1 body weight for the intraperitoneal route, and (ii) 15 mg ml−1 and 30 mg ml−1 for the intranasal route. Images were acquired over a 3 h time period to determine the optimal time to image after luciferin administration. For luciferin administered via the intraperitoneal route, no signal could be detected until 5 min post-substrate administration at which point bioluminescence was evident in the lungs of all four positive mice and in the abdomen of one mouse injected with 500 mg kg−1 luciferin (Fig. 10). The signal in the abdomen most likely reflects the presence of ffluc-expressing M. smegmatis in the gastrointestinal tract, which could be due to the introduction of some bacteria into the oesophagus during the endotracheal inoculation. After the first 5 min, the bioluminescent signal increased exponentially, reaching a peak 25–30 min after substrate injection, with a level four to six times greater when using the higher concentration of luciferin (4.5×107–7.5×107 photons s−1 compared to 1.2×107–1.4×107 photons s−1). After that the light level diminished approximately 50% in 30 min, followed by another 50% decrease every hour until the end of the experiment. No signal was detected in mice inoculated with M. smegmatis pMV306hsp (Fig. 10A), with stable background levels during the whole experiment (6×104–8×104 photons s−1 for 300 mg kg−1 luciferin, and 5.9×104–1.2×105 photons s−1 for 500 mg kg−1 luciferin, Fig. 10B). Therefore the best conditions for imaging of ffluc-expressing M. smegmatis given intraperitoneal substrate are using 500 mg kg−1 luciferin and imaging 25–30 min post-substrate administration.

Figure 10. Kinetics of FFluc activity in M. smegmatis infected mice after intraperitoneal injection of luciferin.

Mice were endotracheally inoculated with 1.4×107 CFU of M. smegmatis pMV306hsp+FFlucWT [two representative mice (M1 and M2) out of four are shown] or with 6.8×106 CFU of M. smegmatis pMV306hsp (control). 300 mg kg−1 or 500 mg kg−1 luciferin intraperitoneal was given 24 h post-inoculation and images were acquired at time points 0 (immediately after substrate administration), 5, 10, 15, 20, 25, 30, 60, 120 and 180 min. (a) Images were obtained using an IVIS Spectrum and are displayed as pseudocolour images of peak bioluminescence (given as photons s−1 cm−2 steridian [sr]−1), with variations in colour representing light intensity at a given location. Mice injected with 300 mg kg−1 luciferin were imaged with an integration time of 1 min, whereas those that received 500 mg kg−1 luciferin were imaged for 10 s to avoid saturation of the image. Three representative time points are shown. (b) Bioluminescence (given as photons s−1) in the thorax was quantified for each time point using the region of interest tool in the Living Image software program.

For luciferin administered by the intranasal route, bioluminescence could be detected immediately after substrate introduction (Fig. 11), and the maximum signal in the lungs was obtained in just 5–10 min (3.5×106–4.6×106 photons s−1 when 15 mg ml−1 luciferin was administered, and 2.5×106–4.6×106 photons s−1 for 30 mg ml−1 luciferin). In addition to the signal in the lungs a strong signal could be detected in the nose of the three positive mice (Fig. 11A) indicating the presence of FFluc-producing M. smegmatis in that organ too. This signal was not observed when the luciferin was administered via the intraperitoneal route, most likely as a result of the increased systemic distribution of the substrate. After reaching a peak, the bioluminescence in the lung and nose decreased by 50–80% in 30 min falling close to background levels 2–3 h after substrate administration (Fig. 11). The background levels remained constant during the whole experiment at approximately 1.2×105 photons s−1. Thus the best conditions for imaging of ffluc-expressing M. smegmatis given intranasal substrate are using 15 mg ml−1 luciferin and imaging 5–10 min post-substrate administration.

Figure 11. Kinetics of FFluc activity in M. smegmatis infected mice after intranasal administration of luciferin.

Mice were endotracheally inoculated with 6.6×106 CFU of M. smegmatis pMV306hsp+FFlucWT [two representative mice (M1 and M2) out of four are shown] or with 6.8×106 CFU of M. smegmatis pMV306hsp as a control (one representative mouse out of two is shown). 20 µl of 15 mg ml−1 or 30mg ml−1 luciferin intranasal was administered 24 h post-inoculation and mice were imaged 0, 5, 10, 15, 30, 60, 120 and 180 min after. (a) Images were obtained using an IVIS Spectrum and are displayed as pseudocolour images of peak bioluminescence (given as photons s−1 cm−2 sr−1). Red represents the most intense light emission while blue correspond to the weakest signal. The colour bar indicates relative signal intensity. Mice were imaged with an integration time of 30 s. Three representative time points are shown. (b) Signal intensity (given as photons s−1) in the lungs was quantified for each time point using the region of interest tool in the Living Image software program.

A similar assay was performed using Gluc. Two coelenterazine concentrations were administered intranasally (10 and 20 µg) and images were acquired at different time points over 3 h. A high background was detected in all cases and no differences were observed between mice inoculated with M. smegmatis pMV306hsp+Gluc or M. smegmatis pMV306hsp (Fig. 12A, B). The same mice were then administered 10 µg coelenterazine by the intraperitoneal route 5 h after initial intranasal substrate administration. A high background signal was detected in the abdomen of both the positive and control mice (Fig. 12C), while the bioluminescence observed in the nose was due to the previous intranasal coelenterazine. Consequently, Gluc is not useful for in vivo imaging of M. smegmatis.

Figure 12. BLI of gluc-expressing M. smegmatis.

Mice were endotracheally inoculated with 3.32×106 CFU of M. smegmatis pMV306hsp+Gluc [two representative mice (M1 and M2) out of three are shown,) or with 1.58×107 CFU of M. smegmatis pMV306hsp as a control (one out of two mice is shown). 10 µg of coelenterazine intranasal was administered 24 h post-inoculation and mice were imaged at time points 0, 5, 10, 15, 30, 60, 120 and 180 min. (a) Images were obtained using an IVIS Spectrum and are displayed as pseudocolour images of peak bioluminescence (given as photons s−1 cm−2 sr−1), with variations in colour representing light intensity at a given location. Integration time was 5 min. (b) Bioluminescence (given as photons s−1) was quantified using the Living image software. (C) 10 µg of coelenterazine was given intraperitoneally to the same mice 5 h post-intranasal coelenterazine. Mice were imaged 0, 5, 10, 15, 20, 25 and 30 min post-intraperitoneal coelenterazine with integration times of 3 min.

Mice infected with M. smegmatis pMVhsp+LuxAB+G13+CDE were also imaged. Bioluminescence could be detected in the lungs of the positive mice while no signal was observed in the control mouse (Fig. 13).

Figure 13. BLI of lux-expressing M. smegmatis.

Mice were inoculated endotracheally with M. smegmatis pMV306hsp+LuxAB+G13+CDE [7.9×106 CFU, two mice (M1 and M2) out of four are shown] or M. smegmatis pMV306hsp (6.8×106 CFU, control) and imaged 24 h post-inoculation. Images were obtained using an IVIS Spectrum and are displayed as pseudocolour images of peak bioluminescence (given as photons s−1 cm−2 sr−1), with variations in colour representing light intensity at a given location. Mice were imaged with an integration time of 5 min.

Finally, we also imaged mice infected with ffluc-expressing M. tuberculosis after administering intranasal luciferin. Bioluminescence was detected in the lungs of mice receiving ffluc-expressing bacteria, while no signal was observed in the control mouse infected with the wild-type M. tuberculosis H37Rv (Fig. 14).

Figure 14. BLI of ffluc-expressing M. tuberculosis.

Mice were inoculated endotracheally with 5×106 CFU of either wild-type M. tuberculosis (control) or FFluc-producing M. tuberculosis. 20 µl of 30 mg ml−1 luciferin was administered intranasally and mice were imaged 5–10 min after. Mice were contained in a large air-tight box for safety considerations. The image was obtained using an IVIS Spectrum and is displayed as a pseudocolour image of peak bioluminescence (given as photons s−1 cm−2 sr−1). Red represents the most intense light emission while blue correspond to the weakest signal. The colour bar indicates relative signal intensity. Mice were imaged with an integration time of 1 min.


Work with mycobacteria is hampered by their long duplication times meaning that, in the case of M. tuberculosis, results based on organ CFU counts are only available three to four weeks after the conclusion of the experiment. This handicap can, in part, be overcome by the use of non-invasive imaging techniques which allow infection dynamics to be studied in real-time. Moreover, such techniques allow for drastic reductions in the numbers of animals used in experiments. Recently an M. tuberculosis recombinant strain expressing a bacterial thymidine kinase was visualised in vivo using [125I]FIAU-single photon emission computed tomography (SPECT) [48]. While this technique is able to accurately measure the level of signal and has good spatial resolution, there are some issues with non-specific signals and the relatively high cost [48].

An alternative to this technique is the use of BLI which has proved very useful in the study of infectious diseases caused by a variety of bacteria [49], [50], [51], [52], [53], [54]. In the only work on BLI of mycobacteria published so far, the luxAB genes were used, thus requiring the administration of the toxic substrate decanal. Although the infection could be detected in the abdomen of intravenously infected mice, the signal in the lungs was too low to be detected after intraperitoneal administration of aldehyde. To overcome these problems and thus further develop BLI imaging of mycobacteria, we have optimised the FFluc and Gluc luciferases for use in mycobacteria, both of which use non-toxic substrates, and the whole lux operon that does not require the external addition of substrate.

Approaches for imaging reporter gene expression mainly depend on robust levels of reporter protein. This, in turn, depends on the nature of the expression vector used, including the copy number, and the transcriptional and translational signals. With this in mind we compared the bioluminescent signal obtained with each reporter using three different vectors (two episomal vectors with 2–5 and 32–64 copies per cell, and one integrating vector), three different promoters (Phsp60, PmyctetO, and PG13), and finally, with an optimised Shine-Dalgarno sequence, we also tested the effect of codon optimisation. Our results demonstrate that the best expression was achieved using the integrating vector, a finding most likely linked to a considerable instability of the replicating vectors when expressing ffluc and lux. In fact, the whole lux operon was only stably expressed in M. smegmatis when it was cloned into the integrating vector, with no positive clones isolated using the episomal vectors. This would explain why this reporter operon had never been successfully expressed in mycobacteria until now. A similar situation has also been reported for the expression in mycobacteria of other recombinant genes like the HIV-1 gp120 [38] or the human interleukin 2 [55]. The more stable expression of foreign antigens in mycobacteria using integrating vectors as opposed to episomal vectors has been extensively documented [56], [57], [58], [59] and is mainly attributed to lower expression, and therefore a lower metabolic burden, associated with the reduction in the copy number.

In the case of the lux operon, we have previously found that plasmid-based expression of luxD is toxic in mycobacteria (S. Wiles, unpublished results). This gene encodes an acyl transferase which forms part of an enzyme complex (along with the products of luxC and luxE) responsible for recycling the fatty acid by-products of the luciferase reaction back into long chain aldehydes for use as further substrate. Given the importance of fatty acids in the cell wall structure of mycobacteria, it is not surprising that over-expression of fatty acid modifying enzymes would be detrimental.

Regarding promoter selection, we have found that the promoter Phsp60 drove the highest luminescence for the three reporters, although the differences between the three promoters were only minor. Phsp60 is known to be a strong promoter in mycobacteria and has been used extensively to over-express proteins [38], [60], [61], [62], [63]. However, PmyctetO, isolated from an M. smegmatis/M. tuberculosis library using GFP to assess gene expression in vitro [42]; and PG13, isolated from an M. marinum library expressing GFP inside macrophages [43], [44], have both been reported to be stronger than Phsp60 (10 and 10–20 times, respectively). The discrepancy with our results could be related to the different reporters used to measure gene expression, and the toxicity and metabolic load associated with their over-expression. It may also be that the highest stable level of expression for our reporters had already been achieved with the Phsp and therefore the use of stronger promoters did not increase expression further. This would be in agreement with the instability observed using the episomal vectors for ffluc and lux, and when using the PmyctetO with lux.

Perhaps unsurprisingly, codon-optimisation was found to increase the signal obtained for FFluc (30-fold [76% homology]) and Gluc (2.5-fold [74% homology]). Unexpectedly, the M. tuberculosis codon-optimised Lux was found to be non-functional, even after the addition of exogenous substrate. We have not explored the basis for this inactivity; however, there is a suggestion from the optimised sequence that after transcription the DNA may form secondary structures that impede translation (data not shown).

We also characterised the various bioluminescence reactions by varying the integration time and substrate concentration, and by measuring the kinetics of light output. The results obtained are similar to those previously described [9], [10] proving that Gluc catalyses a rapid ‘flash’ reaction, FFluc has glow kinetics, and the continuous synthesis of substrate by the lux operon allows for steady luminescence. In this work, we have found that FFluc produced the highest luminescence, 10 times brighter than that obtained with Lux, and 100 times that of Gluc. This is in contrast with the results of Snewin et al. who found LuxAB to be brighter than FFluc [31], but this was done using an episomal reporter that required the addition of aldehyde substrate. Consequently, the substrate may have been in excess, which might be a limiting factor in our whole operon lux reporter. To test this hypothesis an extra promoter was cloned in front of luxCDE to boost substrate synthesis, and indeed a 6-fold higher signal was obtained. The alternative of adding exogenous substrate also increased the signal 5–10 times (data not shown). The availability of FMNH2 could also be a limiting factor. In yeast, co-expression of luxAB together with the frp gene, encoding a NADPH-FMN oxidoreductase from Vibrio harveyi, led to a 100-fold increase in the luminescence [64]. However, we have found the same approach in mycobacteria to have no effect on the final signal (unpublished results).

Once the best conditions for reporter expression were selected, we proceeded to explore if the bioluminescence signal obtained was strong enough for the imaging of mycobacteria in vivo. Importantly, bioluminescence could be detected in the lungs of mice infected with either ffluc or lux-expressing M. smegmatis or ffluc-expressing M. tuberculosis. FFluc utilises a non-toxic, well tolerated substrate that can be repeatedly administered for repetitive imaging. The main route of luciferin administration is by intraperitoneal injection, however intranasal delivery has been recently described as a more efficient route for the monitoring of bioluminescence in the lungs, while using 30 times less luciferin [65]. We have found that a good signal is obtained using intranasal luciferin, although a stronger signal can be achieved using intraperitoneal luciferin which would also have the advantage of allowing detection of signal in other locations besides the lungs.

Surprisingly, the signal from Gluc-producing M. smegmatis in mice could not be distinguished from the strong background produced by the coelenterazine substrate alone. These results were unexpected considering that published work with eukaryotic cells states that the Gluc signal is 1000 times stronger than that of FFluc in cell culture, and as bright as FFluc in vivo, with no background detected in vivo even using a 20-fold higher concentration of coelenterazine [9]. Gluc is naturally secreted from eukaryotic cells and this has been used to quantify the number of Gluc-producing cells in murine blood samples [66]. Although we have proved that Gluc is also secreted from M. smegmatis, we have been unable to detect it in blood samples taken from infected mice thus far (data not shown). Overall these results preclude Gluc as a reporter for either in vivo imaging of mycobacteria or ex vivo monitoring of infected organs.

The results presented here represent an important step towards the use of bioluminescence for the non-invasive study of mycobacteria infection in vivo. In fact, the use of FFluc, or the whole lux operon would represent a major advantage compared, for example, to the use of just luxAB. There are, however, some issues that should be considered and further investigated. First, the minimal number of bacteria capable of being detected within the lungs is expected to be quite high, especially when compared to the inocula that are normally used in experimental M. tuberculosis infections. Although this could limit the use of BLI studies for the initial stages of the infection, it would not pose a problem in more advanced phases of the infection and would still represent an important improvement in drug or vaccine efficacy testing. Secondly, luciferin accessibility to the bacteria contained in granulomatous lesions could affect the signal obtained and has to be further investigated. To that end, preliminary results have shown that luminescence can be detected during infection of macrophage in vitro thus proving the permeability of macrophages to luciferin (unpublished data). Finally, the signal obtained is also affected by the metabolic state of the bacteria since the luciferase reaction relies on bacterial metabolites, mainly ATP and FMNH2 for FFluc and Lux respectively. This is exemplified by the decrease in the luminescence observed when M. smegmatis enters the stationary phase and has also been previously described for other bacteria [67], [68], [69], [70], [71]. Although this could represent a handicap for the study of, for example, dormant M. tuberculosis it could be a powerful tool to gain insights into the metabolic state of M. tuberculosis during infection, to study entrance into dormancy, as well as for the rapid detection of drugs acting on bacterial metabolism.

Materials and Methods

Bacterial strains and growth conditions

M. smegmatis mc2155 [72], M. tuberculosis H37Rv and Escherichia coli NEB-10β (New England Biolabs UK Ltd) were used in this work. M. smegmatis and M. tuberculosis were grown on Middlebrook 7H11 agar medium (BD Diagnostics) supplemented with 0.5% glycerol and 10% oleic acid albumin-dextrose-catalase (OADC) (BD Diagnostics). When required, filter-sterilised luciferin was added at a final concentration of 0.157 mM. Liquid cultures of M. smegmatis and M. tuberculosis were grown either in Middlebrook 7H9 broth (BD Diagnostics) containing 0.05% Tween 80 (Sigma) and 10% albumin-dextrose-catalase (ADC) enrichment (BD Diagnostics), or (for M. smegmatis Gluc assays) in Luria-Bertani (LB) medium with 0.05% Tween. LB medium was preferred for the Gluc assays because the background of coelenterazine was 100 times lower in that medium than in 7H9 broth. LB medium was used for culturing E. coli. All the strains were grown at 37°C. The following antibiotics were added when appropriate: ampicillin [100 µg ml−1 (Sigma)], hygromycin B [150 µg ml−1 (Invitrogen)] and kanamycin [25 µg ml−1, for mycobacteria, 50 µg ml−1 for E. coli (Sigma)].

Construction of bioluminescent reporter plasmids and strains

The plasmids used in this study are described in Tables 14. The integrating expression vectors pMV306hsp and pMV306myc were constructed by cloning into pMV306 the promoters Phsp60 and Pmyc1tetO obtained as NotI-HindIII and XbaI-SalI fragments from pSMT3 and pSE100 respectively. All reporter genes, except for the lux operon, were PCR amplified using the primers and templates listed in Table 5. These primers contained an optimised Shine-Dalgarno sequence (Mega SD) [45] and/or restriction sites as indicated. The sequence of the PCR products was confirmed by DNA sequencing. The M. smegmatis optimised gluc gene was cloned into pSMT3 and pSMT3M as a BamHI-HindIII fragment and into pMV306myc as an EcoRI-SalI fragment. For cloning the wild-type and optimised gluc genes into pMV306hsp the PCR products were digested with EcoRI-SalI. Plasmids containing the M. tuberculosis optimised ffluc gene were made in a similar way but cloning the EcoRI-XbaI PCR product into pUC18 first to use the restriction sites of this vector's MCS. The wild-type ffluc was cloned into pMV306hsp as a HindIII-SalI insert. Plasmids pMV306hsp+Lux, pSMT3+Lux and pSMT3M+Lux were created by cloning a 5.7-kb EcoRI-PstI blunted fragment (containing the whole lux operon) from pSB2025 into the respective expression vector. Deletion of a 0.4 kb NotI-EcoRI fragment (containing Phsp60) from pMV306hsp+Lux and insertion of Pmyc1tetO from pMV306myc produced pMV306myc+Lux. In a similar way, the reporter plasmids containing the G13 promoter were made replacing the Phsp60 of the corresponding reporter vector with PG13 by digestion with NotI-EcoRI. pMVhsp+LuxAB+G13+CDE was obtained by cloning the KpnI PG13 PCR fragment into pMVhsp+Lux in front of luxC. Finally, luxCDABE from pMU1* was cloned into pMV306hsp as a 5.7-kb EcoRI PCR fragment.

Reporter strains were obtained by electroporation of reporter plasmids into M. smegmatis mc2155 or M. tuberculosis H37Rv as previously described [73]. Each strain was named according to the plasmid it contained. The strains transformed with an integrating vector were checked by PCR with primers amplifying the corresponding promoter and reporter gene; whereas recombinant strains with replicating vectors were confirmed by recovering the plasmid after transformation into E. coli.

Bioluminescence assays

Luciferases substrates.

Coelenterazine (Gold BioTechnology®, Inc., St. Louis, Mo., USA), the substrate for Gluc, was reconstituted in acid methanol to a concentration of 10 mM (4.238 mg ml−1). The substrate for FFluc, D-luciferin (Gold BioTechnology®), was prepared in distilled water at 94 mM (30 mg ml−1). All stocks were stored at −20°C and diluted in broth media or D-PBS (without calcium or magnesium) immediately before use. Working solutions were kept on ice in the dark during preparation.

Screening of transformants.

After electroporation, 10 randomly selected transformants were grown in broth media. Luminescence was then measured at room temperature on a tube luminometer (Modulus™ Single Tube Multimode Reader, Turner Biosystems) by adding coelenterazine to a final concentration of 10 µM or luciferin to 470 µM, and integrating the signal over 1 s. The results are expressed as relative light units (RLU). The luminescence of Lux transformants was measured in a similar way but without adding any substrate. M. smegmatis Lux electroporation plates were imaged in the IVIS® Spectrum imaging system (Caliper Life Sciences, Alameda, CA) using the Living Image® software (Caliper Life Sciences) and acquiring the signal for 1 s to 30 s. M. smegmatis or M. tuberculosis transformed with the corresponding empty vector were used to measure the background luminescence.

Luciferase activity assays.

For the integration time, substrate and kinetics assays, two or three independent cultures of each strain were grown to an optical density (OD) at 600 nm of 0.6 (mid-log phase) and each culture was measured in duplicate at 37°C with a microplate reader (Mithras LB 940, Berthold Technologies, Bad Wildbad, Germany) using MicroWin 2000 software (Berthold Technologies). When required 50 µl of substrate was injected into 50 µl of sample in a polystyrene 96-well plate and luminescence was measured for 0.1 s to 10 s after a delay of 0.1 s. For the kinetics assay luminescence was measured immediately after adding the substrate and then every 10 s or 30 s (Gluc and FFluc respectively) for 30 min. In the case of the bacterial luciferase the light output was also measured every 30 s for 30 min but without adding exogenous substrate. Cultures of M. smegmatis pMV306hsp were processed in parallel to each experiment and the measurements were treated as the luminescence's background. The results are expressed as RLUs.

Study of Gaussia luciferase secretion

Three independent cultures of M. smegmatis expressing gluc were grown in LB-Tween to mid-log phase (OD = 0.6). A sample of 0.5 ml of each culture was centrifuged, the supernatant filtered using a 0.22 µm Ultrafree-MC centrifugal filter unit (Millipore) and the cell pellet resuspended in 0.5 ml of fresh medium. The luminescence was then measured in duplicate in samples taken from the culture, supernatant and cells using the Mithras LB 940 microplate reader as above.

In vivo studies

Experiments were performed in accordance with the Animals Scientific Procedures Act (1986) and were approved by the local Ethical Review Committee. Barrier-bred female 8–12 week old Balb/c mice (Charles River UK Ltd) were anaesthetised by intraperitoneal injection of 100 mg kg−1 body weight ketamine (Ketaset; Fort Dodge Animal Health, Southampton, UK) and 10 mg kg−1 body weight xylazine (Rompun; Bayer, Newbury, Berkshire, UK) and inoculated with M. smegmatis or M. tuberculosis by endotracheal aerosol application of a total volume of 25 µl using a Microsprayer® (PennCentury, Philadelphia, PA, USA) as previously described [74].

Assessment of bioluminescence (photons s−1cm−2 steridian [sr]−1) from living animals was performed using an IVIS® Spectrum system (Caliper Life Sciences, Alameda, USA) which consists of a cooled charge-coupled device camera mounted on a light-tight specimen chamber. Prior to bioluminescent imaging, mice were anaesthetised with 4% isoflurane. Luciferin dissolved in sterile D-PBS was then administered to animals inoculated with FFluc expressing strains [20 µl of 15 mg ml−1 (47 µM) or 30 mg ml−1 (94 µM) luciferin via the intranasal route, or 300 mg kg−1 or 500 mg kg−1 body weight by intraperitoneal injection]. To image mice infected with Gluc expressing M. smegmatis 50 µl of 0.48 mM or 0.96 mM coelenterazine (prepared by diluting the 10 mM stock in sterile D-PBS just before use) was intranasally administered (10 or 20 µg per mouse respectively), or 150 µl of 0.16 mM coelenterazine via the intraperitoneal route (10 µg). Mice were placed into the camera chamber of the IVIS® Spectrum imaging system where a controlled flow of 2.5% isoflurane in air was administered through a nose cone via the IXG8 gas anaesthesia system (Caliper Life Sciences). A grayscale reference image was taken under low illumination prior to quantification of emitted photons over 30 s to 5 min, depending on signal intensity, using the software program Living Image (Caliper Life Sciences) as an overlay on Igor (Wavemetrics, Seattle, WA). For anatomical localisation, a pseudocolour image representing light intensity (blue, least intense to red, most intense) was generated using the Living Image software and superimposed over the grayscale reference image. Bioluminescence within specific regions of individual mice was also quantified using the region of interest (ROI) tool in the Living Image software program (given as photons s−1). Animals were imaged immediately after inoculation, to assess the success of the delivery, and 24 h post-infection. Animals inoculated with ffluc- or gluc- expressing M. smegmatis were imaged at different time points after substrate administration for up to 3 h.

Statistical analysis

Statistical analyses were performed using GraphPad Prism 5.02 (GraphPad Software, San Diego, USA). Normality of data was tested by use of the D'Agostino & Pearson omnibus normality test. According to this, differences in reporter constructs activity were assessed by use of the non-parametric Kruskal-Wallis test for comparisons of groups of three. If the Kruskal–Wallis test was statistically significant, then a Dunn's multiple comparison test was employed. For groups in pairs the non-parametric Mann-Whitney test, or the t test for normal data, were used.


We would like to thank Phil Hill (University of Nottingham) for plasmid pSB2025; Bakhos A. Tannous (Harvard Medical School, Boston, Massachusetts) for plasmids pUC18 containing the wild-type gluc with and without secretion sequence; Jeff Cirillo (Texas A&M) and Kevin Francis (Caliper Life Sciences) for plasmid pJ246:17659 containing Mycobacterium codon-optimised FFluc; Arryn Craney and Justin Nodwell (Biochemistry & Biomedical Sciences, McMaster University, Ontario, Canada) for providing plasmid pMU1*; Paul Carroll (Queen Mary University of London, Barts and the London School of Medicine and Dentistry) for kindly supplying pSMT3M; and Dan Agranoff (Department of Infectious Diseases & Immunity, Imperial College London) for plasmid pUC57+Gluc containing Mycobacterium codon-optimised Gluc. We would also like to thank Vivek Rao, Paul Carroll, Lise J. Schreuder and Dimitris Kioussis for helpful discussions. We especially thank César Sánchez for critically reviewing the manuscript and helpful suggestions.

Author Contributions

Conceived and designed the experiments: NA THW JR TP GJB UES BDR SW. Performed the experiments: NA AZ TF PE SW. Analyzed the data: NA SW. Wrote the paper: NA BDR SW.


  1. 1. WHO (2009) Global tuberculosis control 2009. 303 p. Epidemiology, strategy, financing: WHO Press.
  2. 2. Hutchens M, Luker GD (2007) Applications of bioluminescence imaging to the study of infectious diseases. Cell Microbiol 9: 2315–2322.
  3. 3. Wright JS 3rd, Jin R, Novick RP (2005) Transient interference with staphylococcal quorum sensing blocks abscess formation. Proc Natl Acad Sci U S A 102: 1691–1696.
  4. 4. Lane MC, Alteri CJ, Smith SN, Mobley HL (2007) Expression of flagella is coincident with uropathogenic Escherichia coli ascension to the upper urinary tract. Proc Natl Acad Sci U S A 104: 16669–16674.
  5. 5. Steinhuber A, Landmann R, Goerke C, Wolz C, Fluckiger U (2008) Bioluminescence imaging to study the promoter activity of hla of Staphylococcus aureus in vitro and in vivo. Int J Med Microbiol 298: 599–605.
  6. 6. Xiong YQ, Willard J, Kadurugamuwa JL, Yu J, Francis KP, et al. (2005) Real-time in vivo bioluminescent imaging for evaluating the efficacy of antibiotics in a rat Staphylococcus aureus endocarditis model. Antimicrob Agents Chemother 49: 380–387.
  7. 7. Kadurugamuwa JL, Modi K, Yu J, Francis KP, Orihuela C, et al. (2005) Noninvasive monitoring of pneumococcal meningitis and evaluation of treatment efficacy in an experimental mouse model. Mol Imaging 4: 137–142.
  8. 8. Gheysens O, Mottaghy FM (2009) Method of bioluminescence imaging for molecular imaging of physiological and pathological processes. Methods 48: 139–145.
  9. 9. Tannous BA, Kim DE, Fernandez JL, Weissleder R, Breakefield XO (2005) Codon-optimized Gaussia luciferase cDNA for mammalian gene expression in culture and in vivo. Mol Ther 11: 435–443.
  10. 10. Wiles S, Ferguson K, Stefanidou M, Young DB, Robertson BD (2005) Alternative luciferase for monitoring bacterial cells under adverse conditions. Appl Environ Microbiol 71: 3427–3432.
  11. 11. Prioli RP, Tanna A, Brown IN (1985) Rapid methods for counting mycobacteria–comparison of methods for extraction of mycobacterial adenosine triphosphate (ATP) determined by firefly luciferase assay. Tubercle 66: 99–108.
  12. 12. Janaszek W, Aleksandrowicz J, Sitkiewicz D (1987) The use of the firefly bioluminescent reaction for the rapid detection and counting of mycobacterium BCG. J Biol Stand 15: 11–16.
  13. 13. Andrew PW, Roberts IS (1993) Construction of a bioluminescent mycobacterium and its use for assay of antimycobacterial agents. J Clin Microbiol 31: 2251–2254.
  14. 14. Cooksey RC, Crawford JT, Jacobs WR Jr, Shinnick TM (1993) A rapid method for screening antimicrobial agents for activities against a strain of Mycobacterium tuberculosis expressing firefly luciferase. Antimicrob Agents Chemother 37: 1348–1352.
  15. 15. Cooksey RC, Morlock GP, Beggs M, Crawford JT (1995) Bioluminescence method to evaluate antimicrobial agents against Mycobacterium avium. Antimicrob Agents Chemother 39: 754–756.
  16. 16. Arain TM, Resconi AE, Hickey MJ, Stover CK (1996) Bioluminescence screening in vitro (Bio-Siv) assays for high-volume antimycobacterial drug discovery. Antimicrob Agents Chemother 40: 1536–1541.
  17. 17. Gordon S, Chung G, Andrew P (1998) The application of bacterial luciferase as a reporter gene in mycobacteria. Methods Mol Biol 101: 235–243.
  18. 18. Deb DK, Srivastava KK, Srivastava R, Srivastava BS (2000) Bioluminescent Mycobacterium aurum expressing firefly luciferase for rapid and high throughput screening of antimycobacterial drugs in vitro and in infected macrophages. Biochem Biophys Res Commun 279: 457–461.
  19. 19. Shawar RM, Humble DJ, Van Dalfsen JM, Stover CK, Hickey MJ, et al. (1997) Rapid screening of natural products for antimycobacterial activity by using luciferase-expressing strains of Mycobacterium bovis BCG and Mycobacterium intracellulare. Antimicrob Agents Chemother 41: 570–574.
  20. 20. Jacobs WR Jr, Barletta RG, Udani R, Chan J, Kalkut G, et al. (1993) Rapid assessment of drug susceptibilities of Mycobacterium tuberculosis by means of luciferase reporter phages. Science 260: 819–822.
  21. 21. Carriere C, Riska PF, Zimhony O, Kriakov J, Bardarov S, et al. (1997) Conditionally replicating luciferase reporter phages: improved sensitivity for rapid detection and assessment of drug susceptibility of Mycobacterium tuberculosis. J Clin Microbiol 35: 3232–3239.
  22. 22. Riska PF, Jacobs WR Jr, Bloom BR, McKitrick J, Chan J (1997) Specific identification of Mycobacterium tuberculosis with the luciferase reporter mycobacteriophage: use of p-nitro-alpha-acetylamino-beta-hydroxy propiophenone. J Clin Microbiol 35: 3225–3231.
  23. 23. Riska PF, Jacobs WR Jr (1998) The use of luciferase-reporter phage for antibiotic-susceptibility testing of mycobacteria. Methods Mol Biol 101: 431–455.
  24. 24. Banaiee N, Bobadilla-Del-Valle M, Bardarov S Jr, Riska PF, Small PM, et al. (2001) Luciferase reporter mycobacteriophages for detection, identification, and antibiotic susceptibility testing of Mycobacterium tuberculosis in Mexico. J Clin Microbiol 39: 3883–3888.
  25. 25. Bardarov S Jr, Dou H, Eisenach K, Banaiee N, Ya S, et al. (2003) Detection and drug-susceptibility testing of M. tuberculosis from sputum samples using luciferase reporter phage: comparison with the Mycobacteria Growth Indicator Tube (MGIT) system. Diagn Microbiol Infect Dis 45: 53–61.
  26. 26. Pai M, Kalantri S, Pascopella L, Riley LW, Reingold AL (2005) Bacteriophage-based assays for the rapid detection of rifampicin resistance in Mycobacterium tuberculosis: a meta-analysis. J Infect 51: 175–187.
  27. 27. Banaiee N, January V, Barthus C, Lambrick M, Roditi D, et al. (2008) Evaluation of a semi-automated reporter phage assay for susceptibility testing of Mycobacterium tuberculosis isolates in South Africa. Tuberculosis (Edinb) 88: 64–68.
  28. 28. Arain TM, Resconi AE, Singh DC, Stover CK (1996) Reporter gene technology to assess activity of antimycobacterial agents in macrophages. Antimicrob Agents Chemother 40: 1542–1544.
  29. 29. Hickey MJ, Arain TM, Shawar RM, Humble DJ, Langhorne MH, et al. (1996) Luciferase in vivo expression technology: use of recombinant mycobacterial reporter strains to evaluate antimycobacterial activity in mice. Antimicrob Agents Chemother 40: 400–407.
  30. 30. Bonay M, Bouchonnet F, Pelicic V, Lagier B, Grandsaigne M, et al. (1999) Effect of stimulation of human macrophages on intracellular survival of Mycobacterium bovis Bacillus Calmette-Guerin. Evaluation with a mycobacterial reporter strain. Am J Respir Crit Care Med 159: 1629–1637.
  31. 31. Snewin VA, Gares MP, Gaora PO, Hasan Z, Brown IN, et al. (1999) Assessment of immunity to mycobacterial infection with luciferase reporter constructs. Infect Immun 67: 4586–4593.
  32. 32. Bouchonnet F, Boechat N, Bonay M, Hance AJ (2002) Alpha/beta interferon impairs the ability of human macrophages to control growth of Mycobacterium bovis BCG. Infect Immun 70: 3020–3025.
  33. 33. Turner DJ, Hoyle SL, Snewin VA, Gares MP, Brown IN, et al. (2002) An ex vivo culture model for screening drug activity against in vivo phenotypes of Mycobacterium tuberculosis. Microbiology 148: 2929–2936.
  34. 34. Kampmann B, Tena GN, Mzazi S, Eley B, Young DB, et al. (2004) Novel human in vitro system for evaluating antimycobacterial vaccines. Infect Immun 72: 6401–6407.
  35. 35. Al-Attiyah R, El-Shazly A, Mustafa AS (2006) Assessment of in vitro immunity to Mycobacterium tuberculosis in a human peripheral blood infection model using a luciferase reporter construct of M. tuberculosis H37Rv. Clin Exp Immunol 145: 520–527.
  36. 36. Heuts F, Carow B, Wigzell H, Rottenberg ME (2009) Use of non-invasive bioluminescent imaging to assess mycobacterial dissemination in mice, treatment with bactericidal drugs and protective immunity. Micro Infect 11: 1114–1121.
  37. 37. Ranes MG, Rauzier J, Lagranderie M, Gheorghiu M, Gicquel B (1990) Functional analysis of pAL5000, a plasmid from Mycobacterium fortuitum: construction of a “mini” mycobacterium-Escherichia coli shuttle vector. J Bacteriol 172: 2793–2797.
  38. 38. Stover CK, de la Cruz VF, Fuerst TR, Burlein JE, Benson LA, et al. (1991) New use of BCG for recombinant vaccines. Nature 351: 456–460.
  39. 39. Carroll P, Schreuder LJ, Muwanguzi-Karugaba J, Wiles S, Robertson BD, et al. (2010) Sensitive Detection of Gene Expression in Mycobacteria under Replicating and Non-Replicating Conditions Using Optimized Far-Red Reporters. PLoS One 5: e9823. doi:10.1371/journal.pone.0009823.
  40. 40. Bourn WR, Jansen Y, Stutz H, Warren RM, Williamson AL, et al. (2007) Creation and characterisation of a high-copy-number version of the pAL5000 mycobacterial replicon. Tuberculosis (Edinb) 87: 481–488.
  41. 41. Qazi SN, Counil E, Morrissey J, Rees CE, Cockayne A, et al. (2001) agr expression precedes escape of internalized Staphylococcus aureus from the host endosome. Infect Immun 69: 7074–7082.
  42. 42. Ehrt S, Guo XV, Hickey CM, Ryou M, Monteleone M, et al. (2005) Controlling gene expression in mycobacteria with anhydrotetracycline and Tet repressor. Nucleic Acids Res 33: e21.
  43. 43. Barker LP, Porcella SF, Wyatt RG, Small PL (1999) The Mycobacterium marinum G13 promoter is a strong sigma 70-like promoter that is expressed in Escherichia coli and mycobacteria species. FEMS Microbiol Lett 175: 79–85.
  44. 44. Barker LP, Brooks DM, Small PL (1998) The identification of Mycobacterium marinum genes differentially expressed in macrophage phagosomes using promoter fusions to green fluorescent protein. Mol Microbiol 29: 1167–1177.
  45. 45. Le Dantec C, Winter N, Gicquel B, Vincent V, Picardeau M (2001) Genomic sequence and transcriptional analysis of a 23-kilobase mycobacterial linear plasmid: evidence for horizontal transfer and identification of plasmid maintenance systems. J Bacteriol 183: 2157–2164.
  46. 46. Craney A, Hohenauer T, Xu Y, Navani NK, Li Y, et al. (2007) A synthetic luxCDABE gene cluster optimized for expression in high-GC bacteria. Nucleic Acids Res 35: e46.
  47. 47. Zhao H, Doyle TC, Wong RJ, Cao Y, Stevenson DK, et al. (2004) Characterization of coelenterazine analogs for measurements of Renilla luciferase activity in live cells and living animals. Mol Imaging 3: 43–54.
  48. 48. Davis SL, Be NA, Lamichhane G, Nimmagadda S, Pomper MG, et al. (2009) Bacterial thymidine kinase as a non-invasive imaging reporter for Mycobacterium tuberculosis in live animals. PLoS ONE 4: e6297.
  49. 49. Hardy J, Francis KP, DeBoer M, Chu P, Gibbs K, et al. (2004) Extracellular replication of Listeria monocytogenes in the murine gall bladder. Science 303: 851–853.
  50. 50. Kadurugamuwa JL, Modi K, Coquoz O, Rice B, Smith S, et al. (2005) Reduction of astrogliosis by early treatment of pneumococcal meningitis measured by simultaneous imaging, in vivo, of the pathogen and host response. Infect Immun 73: 7836–7843.
  51. 51. Wiles S, Pickard KM, Peng K, MacDonald TT, Frankel G (2006) In vivo bioluminescence imaging of the murine pathogen Citrobacter rodentium. Infect Immun 74: 5391–5396.
  52. 52. Glomski IJ, Piris-Gimenez A, Huerre M, Mock M, Goossens PL (2007) Primary involvement of pharynx and peyer's patch in inhalational and intestinal anthrax. PLoS Pathog 3: e76.
  53. 53. Lane MC, Alteri CJ, Smith SN, Mobley HL (2007) Expression of flagella is coincident with uropathogenic Escherichia coli ascension to the upper urinary tract. Proc Natl Acad Sci U S A 104: 16669–16674.
  54. 54. Sjolinder H, Jonsson AB (2007) Imaging of disease dynamics during meningococcal sepsis. PLoS ONE 2: e241.
  55. 55. Kong D, Kunimoto DY (1995) Secretion of human interleukin 2 by recombinant Mycobacterium bovis BCG. Infect Immun 63: 799–803.
  56. 56. Mederle I, Bourguin I, Ensergueix D, Badell E, Moniz-Peireira J, et al. (2002) Plasmidic versus insertional cloning of heterologous genes in Mycobacterium bovis BCG: impact on in vivo antigen persistence and immune responses. Infect Immun 70: 303–314.
  57. 57. Kumar D, Srivastava BS, Srivastava R (1998) Genetic rearrangements leading to disruption of heterologous gene expression in mycobacteria: an observation with Escherichia coli beta-galactosidase in Mycobacterium smegmatis and its implication in vaccine development. Vaccine 16: 1212–1215.
  58. 58. Dennehy M, Bourn W, Steele D, Williamson AL (2007) Evaluation of recombinant BCG expressing rotavirus VP6 as an anti-rotavirus vaccine. Vaccine 25: 3646–3657.
  59. 59. Dennehy M, Williamson AL (2005) Factors influencing the immune response to foreign antigen expressed in recombinant BCG vaccines. Vaccine 23: 1209–1224.
  60. 60. Bastos RG, Dellagostin OA, Barletta RG, Doster AR, Nelson E, et al. (2002) Construction and immunogenicity of recombinant Mycobacterium bovis BCG expressing GP5 and M protein of porcine reproductive respiratory syndrome virus. Vaccine 21: 21–29.
  61. 61. da Cruz FW, McBride AJ, Conceicao FR, Dale JW, McFadden J, et al. (2001) Expression of the B-cell and T-cell epitopes of the rabies virus nucleoprotein in Mycobacterium bovis BCG and induction of an humoral response in mice. Vaccine 20: 731–736.
  62. 62. Dellagostin OA, Esposito G, Eales LJ, Dale JW, McFadden J (1995) Activity of mycobacterial promoters during intracellular and extracellular growth. Microbiology 141 (Pt 8): 1785–1792.
  63. 63. Wang H, Liu Q, Liu K, Zhong W, Gao S, et al. (2007) Immune response induced by recombinant Mycobacterium bovis BCG expressing ROP2 gene of Toxoplasma gondii. Parasitol Int 56: 263–268.
  64. 64. Szittner R, Jansen G, Thomas DY, Meighen E (2003) Bright stable luminescent yeast using bacterial luciferase as a sensor. Biochem Biophys Res Commun 309: 66–70.
  65. 65. Buckley SM, Howe SJ, Rahim AA, et al. (2008) Luciferin detection after intranasal vector delivery is improved by intranasal rather than intraperitoneal luciferin administration. Hum Gene Ther 19: 1050–1056.
  66. 66. Wurdinger T, Badr C, Pike L, de Kleine R, Weissleder R, et al. (2008) A secreted luciferase for ex vivo monitoring of in vivo processes. Nat Methods 5: 171–173.
  67. 67. Loimaranta V, Tenovuo J, Koivisto L, Karp M (1998) Generation of bioluminescent Streptococcus mutans and its usage in rapid analysis of the efficacy of antimicrobial compounds. Antimicrob Agents Chemother 42: 1906–1910.
  68. 68. Francis KP, Yu J, Bellinger-Kawahara C, et al. (2001) Visualizing pneumococcal infections in the lungs of live mice using bioluminescent Streptococcus pneumoniae transformed with a novel gram-positive lux transposon. Infect Immun 69: 3350–3358.
  69. 69. Koga K, Harada T, Shimizu H, Tanaka K (2005) Bacterial luciferase activity and the intracellular redox pool in Escherichia coli. Mol Genet Genomics 274: 180–188.
  70. 70. Galluzzi L, Karp M (2007) Intracellular redox equilibrium and growth phase affect the performance of luciferase-based biosensors. J Biotechnol 127: 188–198.
  71. 71. Morin CE, Kaper JB (2009) Use of stabilized luciferase-expressing plasmids to examine in vivo-induced promoters in the Vibrio cholerae vaccine strain CVD 103-HgR. FEMS Immunology & Medical Microbiology 57: 69–79.
  72. 72. Snapper SB, Melton RE, Mustafa S, Kieser T, Jacobs WR Jr (1990) Isolation and characterization of efficient plasmid transformation mutants of Mycobacterium smegmatis. Mol Microbiol 4: 1911–1919.
  73. 73. Parish T, Stoker NG (1998) Electroporation of mycobacteria. Methods Mol Biol 101: 129–144.
  74. 74. Bivas-Benita M, Zwier R, Junginger HE, Borchard G (2005) Non-invasive pulmonary aerosol delivery in mice by the endotracheal route. European Journal of Pharmaceutics and Biopharmaceutics 61: 214–218.
  75. 75. Garbe TR, Barathi J, Barnini S, Zhang Y, Abou-Zeid C, et al. (1994) Transformation of mycobacterial species using hygromycin resistance as selectable marker. Microbiology 140 (Pt 1): 133–138.
  76. 76. Guo XV, Monteleone M, Klotzsche M, Kamionka A, Hillen W, et al. (2007) Silencing Mycobacterium smegmatis by using tetracycline repressors. J Bacteriol 189: 4614–4623.