Many bacteria move using a complex, self-assembling nanomachine, the bacterial flagellum. Biosynthesis of the flagellum depends on a flagellar-specific type III secretion system (T3SS), a protein export machine homologous to the export machinery of the virulence-associated injectisome. Six cytoplasmic (FliH/I/J/G/M/N) and seven integral-membrane proteins (FlhA/B FliF/O/P/Q/R) form the flagellar basal body and are involved in the transport of flagellar building blocks across the inner membrane in a proton motive force-dependent manner. However, how the large, multi-component transmembrane export gate complex assembles in a coordinated manner remains enigmatic. Specific for most flagellar T3SSs is the presence of FliO, a small bitopic membrane protein with a large cytoplasmic domain. The function of FliO is unknown, but homologs of FliO are found in >80% of all flagellated bacteria. Here, we demonstrate that FliO protects FliP from proteolytic degradation and promotes the formation of a stable FliP–FliR complex required for the assembly of a functional core export apparatus. We further reveal the subcellular localization of FliO by super-resolution microscopy and show that FliO is not part of the assembled flagellar basal body. In summary, our results suggest that FliO functions as a novel, flagellar T3SS-specific chaperone, which facilitates quality control and productive assembly of the core T3SS export machinery.
Many bacteria use the bacterial flagellum for directed movement in various environments. The assembly and function of the bacterial flagellum and the related virulence-associated injectisome relies on protein export via a conserved type III secretion system (T3SS). The multicomponent transmembrane core export apparatus of the flagellar T3SS consists of FlhA/B and FliP/Q/R and must assemble in a highly coordinated manner. In the present study, we determined the role of the transmembrane protein FliO in the maturation of the flagellar core protein export apparatus. We show that FliO functions as a flagellum-specific chaperone during the initial step of export apparatus assembly. FliO facilitates the efficient formation of a stable FliP–FliR core complex and is thus required for quality management and productive assembly of the flagellar export apparatus. Our results suggest a coordinated assembly process of the flagellar core export apparatus that nucleates with the FliO-dependent formation of a FliP–FliR complex. Subsequent incorporation of FliQ, FlhB, and FlhA leads to the assembly of a secretion-competent flagellar T3SS.
Citation: Fabiani FD, Renault TT, Peters B, Dietsche T, Gálvez EJC, Guse A, et al. (2017) A flagellum-specific chaperone facilitates assembly of the core type III export apparatus of the bacterial flagellum. PLoS Biol 15(8): e2002267. https://doi.org/10.1371/journal.pbio.2002267
Academic Editor: Ann Stock, UMDNJ/Robert Wood Johnson Medical School, United States of America
Received: February 22, 2017; Accepted: June 30, 2017; Published: August 3, 2017
Copyright: © 2017 Fabiani et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Data Availability: The mass spectrometry data have been deposited to the ProteomeXchange Consortium (http://proteomecentral.proteomexchange.org) via the PRIDE partner repository with the data set identifier PXD005597.
Funding: Deutsche Forschungsgemeinschaft (grant number SFB 944 projects P4 and Z). Received by M.H.. The funder had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript. Deutsche Forschungsgemeinschaft (grant number SFB 766 project B14). Received by S.W.. The funder had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript. Helmholtz Association (grant number VH-GS-202). Received by F.D.F.. The funder had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript. Alexander von Humboldt Foundation. Received by T.T.R.. The funder had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript. Europeans Unions FP7 (grant number 334030). Received by M.E.. The funder had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript. Deutsche Forschungsgemeinschaft (grant number ER 778/2-1). Received by M.E.. The funder had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript. Helmholtz Association (grant number VH-NG-932). Received by M.E.. The funder had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Competing interests: The authors have declared that no competing interests exist.
Abbreviations: BN-PAGE, blue native PAGE; C ring, cytoplasmic ring; DDM, n-dodecyl-β-D-maltoside; dSTORM, direct stochastic optical reconstruction microscopy; fT3SS, flagellar-specific type III secretion system; HA, 3×hemagglutinin; HBB, hook-basal-body; HMM, Hidden Markov Model; LB, lysogeny broth; LC-MS/MS, liquid chromatography-tandem mass spectrometry; MSD, Mean square displacement; Pfam, protein family; pmf, proton motive force; SIM, structured illumination microscopy; SMT, Single-molecule tracking; T3SS, type III secretion system; TIRF, total internal reflection fluorescence; VC, vector control; vT3SS, virulence-associated type III secretion system; WT, wild type
The ability of many bacteria to move on surfaces and swim through liquid environments depends on the function of a rotating nanomachine, the bacterial flagellum. The flagellum is highly conserved among bacterial species and is best characterized in Salmonella enterica serovar Typhimurium. The structure of the flagellum can be divided into 3 main parts: a basal body, a flexible hook, and a long rigid filament [1,2]. The basal body itself is composed of several substructures located in the cytosol or spanning the bacterial cell envelope. The inner membrane MS ring, the periplasmic P ring, and the outer membrane L ring assemble using the Sec-pathway. The self-assembly of all other axial parts of the flagellum is dependent on protein export through the flagellar-specific type III secretion system (fT3SS) . The core integral-membrane components of the flagellar export apparatus (FlhA/B and FliP/Q/R) are closely related to the virulence-associated T3SS (vT3SS) of the injectisome device used by many gram-negative bacteria to inject toxins into host cells . Protein export via both fT3SS and vT3SS is primarily dependent on the proton motive force (pmf) [5–9]. How the bacterial cell coordinates the self-assembly of the multicomponent export apparatus complex in the inner membrane remains elusive.
Six cytoplasmic and seven membrane proteins are essential for the export of the majority of the extra-cytoplasmic building blocks of the flagellum. The MS ring is made of 26 subunits of FliF and likely assembles after the completion of the core integral membrane export apparatus, similar to the injectisome system [10–13]. Tightly associated with the MS ring is a cytoplasmic ring (C ring) made of FliG/M/N. The C ring functions as a rotor/switch complex and serves also as a docking platform for cargo  and the FliH/I/J ATPase complex [15,16], which facilitates export via ATP hydrolysis [7,17]. Within the MS ring, the integral membrane proteins FlhB/A and FliO/P/Q/R are thought to form the export gate. FlhA was reported to form a nonameric ring and presumably energizes export using the pmf [11,18–20]. FlhB is involved in the switch of secretion specificity between late and early substrates . FliO (17.5 kDa), FliP (25 kDa), FliQ (9 kDa), and FliR (26 kDa) are integral membrane proteins and essential for the export of flagellar substrates . FliP/Q/R are highly conserved in all fT3SS and have homologs in the vT3SS . Interestingly, FliO homologs are apparently absent in the vT3SS, suggesting an important fT3SS-specific role . FliO is a bitopic membrane protein with a large cytosolic C-terminal domain. While FliO is required for flagella formation and motility under physiological conditions, upregulation of flagellar secretion substrates and a secondary-site suppressor mutation in FliP restored partial motility of a ΔfliO strain, indicating a functional link between FliO and FliP [25–27].
Here, we determined the molecular function of FliO in maturation of the flagellar type III secretion system (T3SS). We propose that FliO functions as a flagellum-specific, integral membrane chaperone that stabilizes FliP protein and facilitates the formation of a stable FliP–FliR core complex, which is essential for the productive assembly of a functional flagellar basal body.
Phylogenetic distribution of FliO reveals widespread conservation
Homologs of FliO are absent in vT3SS of the injectisome and were also thought to be absent in many flagellated species. However, Pallen et al.  suggested that FliO homologs are misannotated as FliZ in some bacterial species and identified several potential FliO homologs through PSI-BLAST searches: Cj0352 in Campylobacter jejuni, LA2612 in Leptospira interrogans, RB9276 in Rhodopirellula baltica, and TP0719 in Treponema pallidum.
This suggested that FliO homologs are more widespread than previously thought, and we thus performed a detailed phylogenetic analysis of the distribution of FliO proteins across different bacterial phyla (Fig 1). We retrieved the full collection of representative genomes from the refseq NCBI repository (n = 4771) and queried the genomes for the presence of flagellin, FliO, FliP, FliQ, and FliR homologs using regular annotations. We found that FliO homologs in particular were poorly annotated and in fact sometimes misannotated as FliZ, as previously noted by Pallen et al. . This suggested that a large proportion of FliO homologs are missed by the automated annotation algorithms.
The distribution of FliO, FliP, FliQ, FliR, and flagellin in all The National Center for Biotechnology Information (NCBI) reference genomes (n = 4771) was analyzed according to NCBI annotation and de novo prediction using a Hidden Markov Model (HMM) based on curated Pfam (protein family) database models. (A) Phylogenetic tree based on NCBI taxonomy—outer rings indicate the presence/absence of flagellin, FliO, FliP, FliQ, and FliR. Each colored branch highlights a bacterial phylum. The number of retrieved genomes is indicated for the major phyla; C = Cyanobacteria (119), T = Tenericutes (116), S = Spirochaetes (60), D = Deinococcus-Thermus (39), A = Acidobacteria (24). (B) Gene set representation of de novo predicted FliO, FliP, FliQ, FliR, and flagellin. Left bars show the total number of predicted proteins including previously annotated (dark color) and newly predicted ones (light color) across the NCBI reference genomes. The top bars represent the number of genomes for each combination of predicted FliO, FliP, FliQ, FliR, and flagellin. The pie chart highlights the improved annotation of FliO through the HMM de novo prediction.
We next performed a de novo prediction of flagellin, FliO, FliP, FliQ, and FliR homologs using Hidden Markov Models (HMMs) based on curated Pfam (protein family) database models (Fig 1, S1 Fig). We screened all genomes using the HMM and identified a large number of FliO homologs in genomes in which also FliP and other flagella components were predicted. The majority of predicted FliO hits corresponded to hypothetical proteins, and we identified possible FliO homologs in >80% of flagellated bacteria across most bacterial phyla (Fig 1).
FliO protects FliP from proteolytic degradation
The gene encoding for FliP is frequently encoded in an operon with fliO, and a previous study suggested a functional link between FliO and FliP based on genetic evidence . FliP is strongly conserved in both fT3SS and vT3SS (S2 Fig) and essential for protein export . Accordingly, we hypothesized that the flagellum-specific protein FliO evolved to facilitate efficient production or assembly of FliP, a core component of the fT3SS. In an attempt to validate the presumed functional link between FliO and FliP, we analyzed the effect of excess FliP and FliO in wild-type (WT) and ΔfliO backgrounds. In the WT background, neither expression of FliP nor FliO increased motility compared to the empty vector control (VC) (Fig 2 + S3 Fig). In the fliO deletion background, overproduction of FliP but not of any other fT3SS integral membrane protein restored motility (S4 Fig). These results confirmed that FliO is functionally related to FliP.
(A) Flagellin secretion in the wild-type (WT) (EM2320) and the ΔfliO mutant (EM2323, EM2324) harboring an empty (vector control [VC]) or fliP (pfliP)-expressing vector. Complementation was induced by the addition of 0 μM, 1 μM, and 5 μM sodium salicylate (NaSal). Secreted flagellin was detected by Western blot using anti-FliC antibodies. DnaK was used as loading control. (B) Motility of the WT and the ΔfliO mutant complemented with the empty (VC) or fliP (pfliP)-expressing vector in 0.3% swim agar plates after 5 h at 37°C. Expression of fliP was induced using 5 μM NaSal. Relative motility reports the mean ± SD, n = 4.
The dispensability of FliO upon FliP overexpression led us to speculate that FliO was involved in maintaining FliP stability. To follow this idea, we monitored FliP protein levels after the arrest of de novo protein synthesis. We replaced the native fliP gene with epitope-tagged FliP variants to facilitate the detection of FliP protein. The 3×hemagglutinin (HA)- or 3×FLAG-tagged FliP proteins were expressed from the physiological fliP locus and retained WT function in a swimming plate motility assay (S5 Fig).
In a WT background, FliP remained stable after synthesis inhibition during the duration of the experiment. In a ΔfliO mutant, however, FliP protein levels degraded rapidly (Fig 3A). This suggested that FliO was involved in stabilizing FliP protein. To exclude polar effects of the fliO deletion, we monitored protein stability of episomally expressed FliP in ΔfliP and ΔfliOP mutant backgrounds and observed a similar degradation pattern of FliP in the absence of FliO (Fig 3B). Reminiscent of the FliP degradation pattern in a ΔfliO mutant, we observed rapid degradation of FliP in nonfunctional FliO point mutants (V72G, L91R, and ΔL91-L94) (S6 Fig). Similar FliO point mutations (L91A, ΔL91) were previously shown to be expressed but not able to complement a fliO null mutant .
(A) FliP protein stability in the presence and absence of FliO. Protein levels of chromosomally expressed FliP-3×FLAG were monitored at 0, 60, 120, and 180 min after arrest of de novo protein synthesis. Wild-type (WT) (EM2225), ΔfliO (EM3201). FliP protein levels were normalized to DnaK, and relative FliP levels report the mean ± SD, n = 6. (B) Stability of episomally expressed FliP-3×HA protein in ΔfliP and ΔfliOP mutants after arrest of de novo protein synthesis. ΔfliP + pfliP (TH17448), ΔfliOP + pfliP (EM1610). Relative FliP levels report the mean ± SD, n = 3. (C) Protein stability of chromosomally expressed FliP-3×HA in presence or absence of FliO in the WT (TH17323), ΔfliO (EM1274), ΔclpXP (EM4018), ΔclpXP ΔfliO (EM4019), Δlon (EM4478), and Δlon ΔfliO (EM4479) mutants.
As mentioned above, FliP harbors a signal peptide of the Sec-system, and this raised the possibility that FliO participated in efficient cotranslational membrane integration of FliP. We thus assessed the effects of a fliO deletion in respect to the level of membrane-integrated FliP. Crude membranes were collected by ultracentrifugation and washed with urea to discriminate properly integrated proteins from aggregated proteins associated with the cytoplasmic membrane. FliP protein levels were determined in both the presence and absence of FliO (S7 Fig). As expected for a polytopic integral membrane protein, we detected FliP only in the membrane fractions but not in the cytosol. FliP steady-state protein levels were comparable in the presence and absence of FliO, indicating that FliO did not influence FliP incorporation into the inner membrane.
In order to understand the mechanisms underlying FliO stabilization of FliP, we aimed to identify the protease responsible for FliP degradation. We first analyzed the contribution of the integral membrane protease FtsH, which is involved in quality control of membrane protein complexes, such as the SecYEG translocase . As a deletion of FtsH is lethal, we monitored FliP protein stability under conditions overproducing an inhibitor of FtsH, STM1085 (YccA in Escherichia coli) [30,31]. YccA has been shown to limit the suicidal degradation of jammed Sec-translocon complexes by inhibiting FtsH activity . LamB-LacZ hybrids are commonly used to study jammed Sec-translocons. In order to verify the functionality of our YccA expression construct, we thus monitored bacterial growth after jamming of the Sec-translocon using a LamB-LacZ hybrid in the presence or absence of excess YccA. Expression of YccA from a medium-copy plasmid rescued the lethal growth defect after induction of the LamB-LacZ hybrid (S8A Fig). We next analyzed FliP protein stability in the absence of FliO in the presence or absence of YccA, the inhibitor of FtsH. As shown in S8B Fig, the FliP degradation pattern did not change, which suggested that FtsH might not be primarily responsible for the observed proteolytic degradation of FliP in the absence of FliO. We therefore analyzed FliP stability in the absence of FliO in mutants defective for the cytoplasmic ClpP and Lon proteases. In the ΔclpXP mutant, the presence of FliO was required to maintain FliP stability. In the Δlon mutant, however, FliP was also significantly more stable in the absence of FliO, suggesting that Lon is the primary protease responsible for FliP degradation (Fig 3C).
FliO is not located in the basal body of the flagellum
Previous studies suggested that FliO, FliP, FliQ, and FliR were integral parts of the basal body complex [22,32]. However, the subcellular localization of the fT3SS components has only been experimentally determined for FliP and FliR . As we demonstrated above, overproduction of FliP readily bypassed the requirement of FliO for the formation of functional flagella, which suggested that FliO might not be part of the completed fT3SS. To determine the subcellular localization of FliO, we performed single-molecule super-resolution microscopy of FliO-HaloTag and FliN-HaloTag protein fusions using structured illumination microscopy (SIM) and direct stochastic optical reconstruction microscopy (dSTORM) [27,33]. The chromosomal HaloTag fusions to FliO and FliN did not impair the protein export function of the fT3SS (S9 Fig), and the FliN-HaloTag construct has previously been shown to display normal flagellation patterns . The C ring protein FliN was localized in clusters corresponding to the C rings of flagellar basal bodies, as previously reported [14,34], but not in the absence of the MS ring needed for C ring assembly (Fig 4, Fig 5A). FliO, however, was evenly distributed in smaller clusters in the cytoplasmic membrane, and the observed FliO-HaloTag clusters were not affected in mutant strains defective in MS-ring or fT3SS assembly (Fig 4, Fig 5A). Single-molecule tracking (SMT) revealed that FliN remained stably attached in the cell envelope with an apparent diffusion coefficient of 0.03 μm2 s−1. FliO followed long trajectories in the cell envelope with a 6-fold higher apparent diffusion coefficient of 0.2 μm2∙s−1 (Fig 5B and 5C), which is consistent with previous reports ranging from 0.02 to 0.2 μm2∙s−1 for freely diffusing inner-membrane proteins [35,36]. We next performed colocalization studies of FliO-HaloTag and the C ring protein FliM-mEos (S10 Fig) and FliO-HaloTag or FliN-HaloTag with the flagellar hook (S10 Fig, Fig 5D). The hook-basal-body (HBB) components FliM, FliN, and epitope-tagged hook protein FlgE localized in discrete spots similar to FliN-HaloTag as described above, and, consistently, FliN-HaloTag complexes were readily identified in the vicinity of extracellular hook structures (S10 Fig). In contrast, we did not observe colocalization of FliO-HaloTag with HBB components (S10 Fig, Fig 5D). These results indicated that FliO is not part of the final assembled fT3SS within the basal body complex. We thus hypothesized that FliO does not actively participate in the protein export process but acts as an accessory protein during the assembly of the core export apparatus.
The subcellular localization of FliO-HaloTag (A) or FliN-HaloTag (B) fusions expressed from their native chromosomal locus was analyzed in the wild-type (WT) and mutant backgrounds defective in MS-ring assembly (ΔfliF) or flagellar-specific type III secretion system (fT3SS) function (ΔflhBAE). WT FliO-HaloTag (EM1077), WT FliN-HaloTag (EM1081), ΔfliF FliO-HaloTag (EM6254), ΔfliF FliN-HaloTag (EM2640), ΔflhBAE FliO-HaloTag (EM6256), and ΔflhBAE FliN-HaloTag (EM6258). Strains were treated with 20 nM HaloTag ligands (HTL tetramethylrhodamine [TMR]) and observed using structured illumination microscopy (SIM). The autofluorescence of bacteria upon excitation with a 488 nm laser is shown in the middle panels. Scale bar 2 μm.
(A) Strains expressing chromosomal FliN-HaloTag (EM1081) or FliO-HaloTag (EM1077) fusions were treated with 20 nM HaloTag ligands (HTL tetramethylrhodamine [TMR]) and analyzed by total internal reflection fluorescence (TIRF) microscopy. As described before, 500 frames were acquired with 5 mW laser power at the focal plane. The autofluorescence of bacteria upon excitation with a 488 nm laser is shown in the upper left corner. Scale bar 1 μm. (B) Single-molecule tracking (SMT) of TMR-labeled FliN and FliO. Selected frames from a series of 500 frames are shown, and frame numbers are indicated. (C) Mean square displacement (MSD) plots of pooled trajectories of at least 25 bacteria recorded under the same conditions. The diffusion coefficient D was calculated using the Jaqaman algorithm. (D) Dual-color direct stochastic optical reconstruction microscopy (dSTORM) of fixed bacteria expressing chromosomal FlgE-3×HA and FliO-HaloTag fusions (EM1214). Scale bar 1 μm.
FliO is required for FliP complex formation and basal body assembly
In order to study the effect of the absence of FliO on core fT3SS export apparatus formation and basal body assembly, we performed blue native PAGE (BN-PAGE) on crude membrane extracts solubilized in n-dodecyl-β-D-maltoside (DDM) (Fig 6). In a WT background, we detected 3×FLAG epitope–tagged FliP expressed from its native chromosomal locus in several low, intermediate, and high-molecular-weight complexes. We additionally performed liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis of selected bands corresponding to FliP-containing complexes, as detected by BN-PAGE Western blotting (S11 Fig). According to the BN-PAGE migration pattern and mass spectrometry analysis, FliP is present in several complexes in the WT: in a high-molecular-weight complex (complex 1), which presumably corresponds to finished, completed HBB complexes; in a minor (less abundant), intermediate molecular weight precursor complex (complex 3); and in a major (more abundant), intermediate molecular weight precursor complex (complex 4) (Fig 6A). LC-MS/MS analysis of the intermediate-molecular-weight FliP-containing complexes 3 and 4 further suggested the presence of FliO (in complex 3 and 4) and FliR (in complex 4). We note that we did not detect FliP in complex 4 by LC-MS/MS analysis, which is likely explained by well-known difficulties in detecting hydrophobic membrane proteins by LC-MS/MS (S11A Fig).
A. Anti-FLAG Western blot of BN-PAGE of crude membrane extracts prepared from the wild-type (WT) (EM2225), ΔfliO (EM3201), ΔfliF (EM4909), and ΔfliO ΔfliF (EM4910) mutant strains encoding for chromosomal FliP-3×FLAG. (B) Anti-FLAG Western blot of BN-PAGE of crude membrane extracts prepared from the WT (EM2269) and ΔfliF (EM3910) mutant strains encoding for chromosomal FliO-3×FLAG.
In a mutant strain deficient for FliO, however, we neither detected FliP in complex 1 corresponding to the completed HBB, nor at the molecular weight of the intermediate-molecular-weight FliP precursor complexes 3 and 4. However, monomeric FliP was substantially more abundant in the ΔfliO mutant than in the WT. We also observed the formation of another FliP-containing high-molecular-weight complex in the ΔfliO mutant, which apparently migrated slightly below the completed basal body complexes of the WT and could correspond to aggregated FliP subassemblies (complex 2) (Fig 6A).
We next analyzed the assembly of FliP complexes in a mutant strain defective in MS-ring assembly (ΔfliF). Interestingly, the formation of the intermediate-molecular-weight FliP-containing subcomplexes 3 and 4 was not dependent on the presence of the MS ring, in contrast to the presence of FliP in the high-molecular-weight basal body complex (complex 1) (Fig 6A). Importantly, in a ΔfliO ΔfliF double mutant, we observed the formation of a FliP-containing aggregation complex (complex 2) but not the intermediate-molecular-weight FliP precursor complexes 3 and 4. This suggested that complex 2 corresponds to aggregated FliP and demonstrates that the complex 2 is not related to the completed basal body complex observed in the WT (complex 1). In summary, these results suggested a sequence of assembly of the flagellar core export apparatus, which nucleates with the formation of a FliP-containing subcomplex, followed by subsequent assembly of additional transmembrane export apparatus components, and concluded by the assembly of the MS ring. Similar to the assembly of FliP, the formation of a FlhA-containing high-molecular-weight complex, which presumably corresponds to the finished HBB, was dependent on the presence of FliO and FliF (S12 Fig).
We next performed BN-PAGE of crude membrane extracts of a strain encoding for a functional FliO–FLAG fusion protein to corroborate the mass spectrometry and subcellular localization results. FliO showed a very heterogeneous size distribution in the BN-PAGE analysis, indicating complexes of different compositions (Fig 6B). The presence of FliO in intermediate-molecular-weight FliP-containing complexes—but not in completed HBB complexes—was also supported by LC-MS/MS analysis (S11A Fig) and is consistent with the super-resolution subcellular localization studies of FliO-HaloTag described above.
To validate the presence of FliO in FliP precursor complexes, we performed a FLAG-pull down of chromosomally encoded FliP-3×FLAG in a rod− background (ΔflgBC) under native conditions, followed by BN-PAGE protein separation and LC-MS/MS analysis (S11B Fig, S13A Fig). A rod− background was used to facilitate access of the 3×FLAG–tag located in the periplasmic domain of FliP. We observed several high-molecular-weight complexes, which corresponded to different FliP-containing subassemblies of the export gate and the basal body. Mass spectrometry analysis of the FliP-containing complexes suggested the presence of basal body components (FliF, FliG, FlhA) in the high-molecular-weight complexes A and B, and of FlhA, FliO, and FliR in the intermediate-molecular-weight complexes C and D that copurified with FliP. In support, a pull down of chromosomally encoded FliO-3×FLAG using crude membrane extracts of a rod− background copurified chromosomally encoded FliP-3×HA (S13B Fig). We further expressed a plasmid-based FliO His6-FliP construct in E. coli and performed His6-FliP affinity purification followed by size exclusion chromatography. High molecular weight, pore-like FliP-containing complexes copurified with FliO, suggesting a direct or indirect interaction between these proteins (S13C Fig).
We next followed up on the presumed presence of the core integral membrane fT3SS component FliR in FliP-containing intermediate-molecular-weight complexes. We purified crude membrane extracts of rod− strains expressing FliP-3×FLAG and FliR-3×FLAG constructs from their native chromosomal locus and performed 2D BN-PAGE analysis (Fig 7). In the WT, we detected FliP and FliR in a high-molecular-weight complex corresponding to the flagellar basal body and in similar intermediate-molecular-weight complexes, which presumably corresponded to FliP–FliR subassemblies. Consistent with the 1D BN-PAGE results of Fig 6, the formation of FliP- and FliR-containing basal body complexes, but not the assembly of the intermediate-molecular-weight FliP–FliR complex (complex 4, Fig 6A), was dependent on the MS-ring protein FliF. We also note that the formation of stable FliP–FliR subassemblies is reminiscent to the previously observed SpaP–SpaR complex of the vT3SS [13,37].
(A) Anti-FLAG Western blot of a 2D BN-PAGE of crude membrane extracts prepared from rod− (ΔflgBC) strains encoding for chromosomal FliO-3×FLAG and FliP-3×FLAG. The strains additionally harbored a deletion of rflP, a negative regulator of the flagellar master regulator FlhDC and responsible for the phenotypic heterogeneity of flagellar gene expression in lysogeny broth (LB) medium . The deletion of rflP results in homogeneous flagella production for cultures grown in LB and thus facilitates detection of the chromosomally encoded epitope-tagged transmembrane export apparatus components, which are expressed at low levels. Wild-type (WT) (EM6229) and ΔfliF (EM6195). (B) Anti-FLAG Western blot of a 2D BN-PAGE of crude membrane extracts prepared from ΔflgBC ΔrflP strains encoding for chromosomal FliO-3×FLAG and FliR-3×FLAG. WT (EM6228) and ΔfliF (EM6196).
Our results, presented above, suggested that the observed major, intermediate-molecular-weight FliP precursor complex (complex 4, Fig 6A) contained FliR and that the formation of a stable FliP–FliR complex was dependent on FliO. To test whether formation of the major FliP-containing precursor complex also involves FliQ, whose gene is encoded between fliP and fliR, we next analyzed formation of the major FliP precursor complex in mutants of the core fT3SS. As shown in Fig 8, the assembly of stable FliP-containing subassemblies was dependent on the presence of FliO and FliR but not on FliQ or FliF. These observations corroborate the hypothesis that FliO facilitates the assembly of a stable FliP–FliR intermediate-molecular-weight complex, which subsequently recruits FliQ and other components of the fT3SS for the assembly of a functional protein export apparatus.
Left: The assembly of stable FliP subassemblies is dependent on FliO and FliR but not on FliQ or FliF. Anti-FLAG Western blot of blue native PAGE (BN-PAGE) of crude membrane extracts prepared from the wild-type (WT) harboring untagged FliP (LT2, TH437) and mutant strains encoding for chromosomal FliP-3×FLAG: WT (EM6221), ΔfliO (EM6222), ΔfliQ (EM6223), ΔfliR (EM6224), ΔfliF (EM4859). Strains EM6221, EM6222, EM6223, and EM6224 additionally harbored a deletion of the proximal rod components flgBC in order to arrest flagellar synthesis after assembly of the core export apparatus. Right: Model of the coordinated assembly of the core flagellar export apparatus. Upon initiation of flagellum assembly, the flagellar type III secretion system (T3SS)-specific chaperone FliO facilitates formation of an oligomeric complex containing FliP and FliR. FliO then presumably dissociates from the stable FliP–FliR core complex. The FliP–FliR core complex forms the nucleus for the assembly of FliQ, FlhB, and FlhA , followed by MS-ring (FliF) polymerization and formation of the completed protein export-competent flagellar T3SS.
In Salmonella and other gram-negative bacteria, the flagellum and virulence-associated injectisome complexes play a crucial role during the infection process. The injectisome is believed to have evolved from the flagellum , and both nanomachines share many structural and functional similarities. In particular, the proteins forming the core T3SS protein export apparatus are highly conserved. One of the most striking differences is the absence of a FliO homolog in the injectisome vT3SS. Assembly of the flagellum and bacterial motility is dramatically impaired in the absence of FliO ; however, the molecular function of FliO remained elusive. Mutations in fliP have been shown to partially restore motility of a ΔfliO strain, and overexpression of FliO increased FliP expression, suggesting a functional relationship between these 2 proteins . Here, we show that the nonmotile phenotype of a fliO deletion mutant was readily bypassed by moderate overproduction of FliP, which indicated that FliO was involved in FliP stability or complex assembly. To test this hypothesis, we monitored FliP protein stability after arrest of de novo protein synthesis and showed that the presence of FliO prevented FliP degradation. We demonstrate that Lon is the primary protease responsible for FliP degradation. The degradation of FliP as an integral membrane protein by a cytosolic protease is surprising, but LonB of B. subtilis is membrane-localized, and in yeast, the respective Lon homolog has been shown to degrade proteins of the mitochondrial membrane [40,41]. This result suggests that Lon is able to tightly interact with the cytoplasmic membrane in order degrade misassembled FliP.
It has been thought that FliO was part of the fT3SS within the basal body complex [22,23,32], and we performed super-resolution microscopy analyses to determine the subcellular localization of FliO. FliO did not colocalize with components of the basal body, and single-molecule analysis revealed that FliO complexes are evenly distributed and freely diffusing in the cytoplasmic membrane. We thus hypothesized that FliO is not part of the fT3SS in the assembled basal body and does not actively participate in the export process but rather has a function as an accessory protein during assembly of the core export apparatus.
We tested this hypothesis by performing 1D and 2D BN-PAGE and LC-MS/MS analyses of crude membrane extracts to determine the composition of the basal body complex under native conditions. We did not detect FliO in completed basal body complexes, but FliO was associated with FliP and FliR-containing subcomplexes. The formation of stable FliP–FliR subassemblies required the presence of FliO, but not the MS-ring protein FliF. These observations indicate that precursors of the flagellar export gate assemble prior and independently from the MS ring, as previously shown for vT3SS assembly of the injectisome [37,42]. Finally, FliP monomers detected using BN-PAGE analysis were strikingly more abundant in the absence of FliO, which was consistent with the absence of FliP-containing higher-molecular-weight complexes in the fliO mutant.
In summary, we propose that FliO functions as a flagellum-specific chaperone required for productive assembly of the core flagellar export apparatus. We suggest that assembly of the flagellar core T3SS initiates with the formation of FliP–FliR oligomers, which is facilitated by FliO. Upon assembly of a stable FliP–FliR core complex, FliO is released and possibly replaced with other export gate components. The FliP–FliR core complex might subsequently serve as platform for the recruitment of FliQ, FlhB, and the FlhA nonamer, resulting in the formation of a secretion-competent export apparatus needed for flagellar assembly (Fig 8). Both the bacterial flagellum and the homologous vT3SS of the injectisome device are important virulence factors of many pathogenic bacteria. Thus, understanding the principles and molecular mechanisms of the assembly of large, multicomponent transmembrane protein complexes might have important implications for the rational design of novel anti-infectives that interfere with the assembly and function of these nanomachines.
Materials and methods
Bacterial strains, plasmids, and growth conditions
Bacterial strains and plasmids used in this study are listed in S1 Table. All strains were derivatives of S. enterica serovar Typhimurium LT2. Cultures were grown in lysogeny broth (LB) at 37°C under continuous shaking to mid-log phase except when stated otherwise.
Chromosomal fusions or clean deletions of genes were created using λ-Red recombination either by tetRA cassette replacement using pKD46 plasmid  or by aph-I-SceI cassette replacement using pWRG730. One-step gene inactivation was performed as described by Datsenko and Wanner . Insertion of a chromosomal LacZ-Frt-aminoglycoside phosphotransferase (Kanamycin resistance)-Frt (FKF) through homologous recombination was performed as described . Mutations, fusions, and deletions were transferred between strains using P22 phage transduction. For STM1085 (yccA) cloning, the gene was amplified by PCR from genomic DNA and subcloned blunt end into pBR322 before cloning with DraIII and BstEII into the IPTG-inducible expression plasmid pTr99FFA.
Phylogenetic analysis and de novo prediction of FliO, FliP, FliQ, FliR, and flagellin homologs
In order to characterize the distribution of FliO, FliP, FliQ, FliR, and flagellin proteins across different bacterial phyla, proteomes (.faa files) of representative genomes were downloaded from refseq NCBI: https://www.ncbi.nlm.nih.gov/refseq/about/prokaryotes/.
A total of 4,771 genomes (date: 01.05.2017) were retrieved, and the proteomes were queried based on regular NCBI annotations for the presence of FliO, FliP, FliQ, FliR, and flagellin proteins. For the de novo prediction of homologs of FliO, FliP, FliQ, FliR, and flagellin proteins, HMMs were generated using the curated Pfam database models for FliO (PF04347), FliP (PF00813), FliQ (PF01313), FliR (PF01311), and flagellin (PF00669+PF00700), and all representative genomes were screened using the hmmsearch function in HMMER3  with the default Pfam database gathering cutoff (GA) per domain. This HMM approach identified a large number of FliO proteins for genomes in which FliP and the other flagella components have been predicted. The majority of novel FliO proteins corresponded to hypothetical genes. Results from the annotated FliO, FliP, FliQ, FliR, and flagellin proteins and the de novo prediction were integrated using custom Python scripts. For the phylogenetic representation, the NCBI taxonomy IDs were extracted using ETEtools , and the tree topology was obtained for a given list of TaxIDs. For tree visualization and rendering, iTOL  was used, and set comparison was visualized using the UpSet tool .
Equal amounts of an overnight culture were inoculated in 0.3% swim agar plates supplemented with appropriate additives. Plates were incubated at 37°C and scanned after 4 h to 7 h. The sizes of the motility halos were measured using ImageJ.
Protein secretion assay
Cells were grown in LB at 37°C until OD600 reached 0.8−0.9, and 1.9 ml of culture was harvested and cooled down on ice. Cells and supernatant were separated by 3 × 3 min centrifugation at 18,000 × g at 4°C. The pellet and 1.5-ml supernatant of each strain were precipitated with 10% TCA. After normalization to the OD600, samples were loaded on a 15% SDS-PAGE and analyzed by Western blot.
Protein stability assay
Overnight cultures of chromosomally encoded FliPQ223×HA/FliPG1573×FLAG were diluted 1:100 into 25 ml of fresh LB and grown at 37°C under shaking until OD600 reached 0.6. Protein synthesis was inhibited by the addition of 0.5 mg ml−1 spectinomycin and 12.5 μg ml−1 chloramphenicol (Cm). The equivalent of 1 ml at OD600 0.6 was collected at 0, 30, 60, 90, 120, and 180 min after synthesis inhibition. Samples were precipitated in 10% TCA, spun down (30 min at 20,000 x g), washed with ice-cold acetone, and resuspended in 40 μl 2 × SDS loading buffer (300 mM Tris-HCl pH 6.8, 4% SDS, 20% glycerol, 25 mM EDTA, 0.04% bromophenol blue, 2% β-mercaptoethanol). 10 μl of each sample was run on 15% SDS-PAGE and analyzed by Western blot. To assess the effect of STM1085, cultures were grown in LB supplemented with ampicillin and with 1 mM IPTG. Synthesis was stopped and samples were collected after 0 min and 180 min, as described above. For plasmid-encoded FliPQ22-3×HA, overnight cultures of ΔfliOP and ΔfliP harboring pKG116-FliPQ22-3×HA were diluted 1/100 into 25-ml LB containing 12.5 μg ml−1 Cm and 2.5 μM sodium salicylate (NaSal) and grown at 37°C for 2.5 h until OD600 0.6. Protein synthesis was inhibited by the addition of 0.5 mg ml−1 spectinomycin . Samples were collected and treated as described above.
Following SDS-PAGE, proteins were transferred onto a nitrocellulose membrane. Directly after transfer, membranes were stripped at 60°C for 20 min to enhance signal as described previously . Blots were then blocked with 5% milk and probed for 1 h with appropriate antibodies: Anti-HA (Sigma-Aldrich; dilution 1:2,000), Anti-FLAG (Sigma-Aldrich; dilution 1:3,000), Anti-DnaK (Abcam; dilution 1:10,000) mouse monoclonal antibodies, rabbit anti-FliC serum (dilution 1:10,000), and rabbit anti-FlhA serum (dilution 1:10,000), respectively. Membranes were then incubated 30 min in Immun-Star Goat anti-mouse HRP and goat anti-HRP secondary antibodies (1:20,000; BioRad). After washing, membranes were developed using Clarity Western ECL (BioRad) and imaged with a ChemiDoc imaging system (BioRad).
Total protein amounts were detected before transfer with 2,2,2-Trichloroethanol (TCE), as described previously . Gels were imaged with a ChemiDoc imaging system after 1-min activation.
Crude and washed membrane preparation for cell fractionation assay
Overnight cultures were diluted 1:50 into fresh LB until OD600 0.7–0.8. The equivalent of 8 OD units was harvested at 8,000 × g for 10 min, resuspended in 750 μl Buffer K (50 mM TEA, 250 mM sucrose, 2 mM EDTA, 10 μg ml−1 lysozyme, 10 μg ml−1 DNase, 1 mM MgCl2, complete protease inhibitors), and incubated for 30 min at 4°C. Cells were lysed using glass beads, and lysates were spun at 10,000 × g for 10 min to eliminate nonlysed cells. Supernatants were then spun down at 150,000 × g at 4°C for 50 min. 900 μl of supernatant was collected and precipitated with 10% TCA, washed, and resuspended in 2 × SDS loading buffer (cytosolic fraction). Pellets were resuspended into 100 μl cold PBS. Half of the suspension was directly mixed with 50 μl 2 × SDS-loading buffer (unwashed membrane fraction). The rest was washed with 1 ml of urea solution (50 mM TAE, 1 mM EDTA pH 7.5) for 1 h at room temperature and centrifuged at 120,000 × g for 1.5 h at 23°C. The supernatant was discarded, and the pellet was resuspended in 100 μl of 1 × SDS loading buffer (washed membrane fraction). All fractions were run on SDS-PAGE and analyzed by Western blots.
(i) Sample preparation and microscopy: Bacteria were subcultured from overnight cultures (1:100) in fresh LB medium and grown for 2.5 h at 30°C. After 1 h 45 min of subculture, fluorescent ligands were added, i.e., 20 nM HTL-TMR (Promega) or 150 nM HTL-Atto655 (self-synthesized) for HaloTag fusions. At least 5 washing steps were performed with minimal medium to remove unbound ligand and LB medium by centrifugation at 8,000 × g for 2 min. Bacteria are diluted to approximately OD600 0.5, and 15 μl was added to freshly prepared agarose-coated glass cover slips prepared with 1% agarose. Another glass slide was positioned on the agarose. Total internal reflection fluorescence (TIRF) microscopy was performed using an inverted microscope (IX71, Olympus) equipped with a motorized 4-line TIRF condenser (cell^TIRF, Olympus), a 150× oil immersion TIRF objective (UAPON 150x OTIRF, Olympus), and high-power lasers: 488 nm, 150 mW (LuxX, Omicron, Germany); 561 nm, 150 mW (Jive, Cobolt, Sweden); 640 nm, 140 mW (LuxX, Omicron, Germany). Images were acquired by an electron-multiplying back-illuminated frame transfer CCD camera (iXon Ultra 897, Andor). A fluorescence filter cube containing a polychroic beamsplitter (R405/488/561/647, Semrock), and a quad-band emission/blocking filter (FF01 446/523/600/677, Semrock) was used. For each cell, 500 frames were recorded with an exposure time of 31 ms for 561 nm and 640 nm laser and laser power of 5 mW. For dual-color dSTORM, bacteria were stained as indicated, washed, and fixed with 3% PFA in PBS for 15 min at RT. After fixation, bacteria were washed again 3 times and were then immobilized on PLL-coated cover slides. As redox system 100 mM β-mercaptoethylamine, 4.5 mg × 10−1 ml D-glucose, 40 μg × 10−1 ml catalase, and 0.5 μg × 10−1 ml glucose-oxidase were added in 1-ml PBS. Five hundred frames were recorded with an exposure time of 31 ms for 561 nm and 640 nm laser, with a laser power of 40 mW and 50 mW, respectively, and a cycle time of 67. SIM was performed using a Nikon Eclipse Ti N-SIM super-resolution microscope equipped with a 100× SR ApoTIRF objective and 488 nm and 561 nm lasers. Using an ORCA FLASH 4.0 camera, 100-nm z-stack images were acquired, and the SIM stacks were reconstructed using the Nikon NIS-Elements 4.5.1 software on auto settings. The pixel data of individual z-stacks were subsequently projected on a single plane using maximum intensity settings. (ii) Single molecule localization and tracking: Localization of single molecules as well as SMT were carried out by a self-written graphical user interface written in Matlab R2012 (MathWorks). Single-molecule localization is based on the multiple-target tracing algorithm, and SMT was performed using the utrack algorithm (online available: MTT: http://ciml-e12.univ-mrs.fr/App.Net/mtt/, utrack: http://lccb.hms.harvard.edu/doc/u-track-2.1.3.zip).
Large-scale crude membrane preparation
In order to perform BN-PAGE, crude membranes were prepared on a large scale as described by Zilkenat et al. . Overnight cultures were diluted 1:100 into 1 liter of fresh LB, and cells were grown at 37°C until OD600 0.8−0.9. All steps were performed at 4°C except when stated otherwise. Eight hundred OD units of culture were harvested and centrifuged at 6,000 × g for 15 min. The supernatant was discarded, and the pellet was washed with cold PBS and centrifuged 10 min at 6,000 × g. Cells were resuspended in 15 ml of buffer K (50 mM TEA, 250 mM sucrose, 1 mM EDTA, pH 7.5) and supplemented with cOmplete mini EDTA free protease inhibitors cocktail, 10 μg ml−1 DNase, 10 μg ml−1 lysozyme, and 1 mM EDTA. After 30-min incubation, cells were lysed using a French Press at 18,000 psi. After lysis, 1-mM MgCl2 was added, and lysates were centrifuged at 24,000 × g for 20 min to eliminate cell debris. Crude membranes were pelleted at 200,000 × g for 50 min, resuspended in 500 μl of buffer M (1×), and homogenized in a 1-ml dounce homogenizer. Membranes were then stored on ice before separation on sucrose gradient or pull down.
1D and 2D BN-PAGE
Crude membranes or pull-down elations were prepared as described above. An aliquot of solubilized membranes (45 μl) were collected and mixed to 5 μl of 5% coomassie G (Serva) in 250-mM n-amino-caproic-acid, 50% glycerol and 25 μl were loaded on a 3%–12% NativePAGE (Thermo Fisher scientific) and run for 50 min at 130 V. The cathode buffer was exchanged and the gel was run for an additional 1 h 30 min at 250 V at 4°C. Electrotransfer onto a PVDF membrane was performed at 30 V for 2 h. As previously described , 2D BN/SDS PAGE of crude membranes was carried out.
Previously homogenized crude membrane extracts were carefully deposed at the surface of a 30%−55% sucrose gradient and were centrifuged for 14 h at 150,000 g. All steps were performed at 4°C. Eight fractions of 1 ml were collected and diluted 1:3 with buffer M (50 mM TEA, 1 mM EDTA at pH 7.5) and centrifuged at 200,000 × g for 45 min. The supernatant was discarded, and the membranes were resuspended in 200-μl buffer L (50 mM TEA, 250 mM sucrose at pH 7.5). After SDS-PAGE and Western blot analysis, the purest fractions were pooled together. Protein concentration was measured using Bradford protein assay (BioRad), and the concentration of each sample was adjusted to 3.0 mg ml−1. Membranes were then solubilized with 1% DDM for 1 h under gentle shaking and centrifuged 20 min at 20,000 × g to eliminate nonsolubilized membranes. The supernatant was collected, and a 25-μl sample was loaded on a 3%–12% BN-PAGE as described below.
FliO/FliP-3×FLAG pull down
A strain lacking the rod proteins (ΔflgBC) was used to ensure that the FLAG tag was accessible from the periplasm. Crude membranes were prepared as described above from a 1-L culture. Membranes were solubilized for 1 h with 0.5% DDM and centrifuged at 20,000 for 20 min to eliminate cell debris. Solubilized membranes were then incubated for 4 h with 25-μl anti-FLAG M2 affinity gel (Sigma) at 4°C in PBS with 0.1% DDM, washed with 4 column volumes, and eluted by addition of FLAG peptide. After analysis on SDS-PAGE, the purest fractions were pulled together and loaded on a BN-PAGE as described above.
FliPHis6 affinity purification
Purification of FliPHis6 expressed from pTrc99a-fliO-fliPHis6 was performed by Ni-NTA chromatography as detailed in Fukumura et al. .
Protein in-gel digestion
Coomassie-stained gel bands were excised and in-gel digested using ProteaseMAX Surfactant (Promega). Sample preparation was done according to the instruction manual with the following modifications: digestions were performed overnight using the enzymes trypsin and chymotrypsin (12.5 ng μl−1 each in 20 mM ammonium bicarbonate, 0.01% ProteaseMAX Surfactant). Extracted peptides were desalted using C18 StageTips  and subjected to LC-MS/MS analysis.
LC-MS/MS analyses were performed on an Easy nano-LC (Thermo Scientific) coupled to an LTQ Orbitrap XL mass spectrometer (Thermo Scientific) . The peptide mixtures were injected onto the column in HPLC solvent A (0.1% formic acid) at a flow rate of 500 nl min−1 and subsequently eluted with a 57-min gradient of 5-33-50-90% HPLC solvent B (80% ACN in 0.1% formic acid). During peptide elution, the flow rate was kept constant at 200 nl min−1. The 10 most intense precursor ions were sequentially fragmented in each scan cycle using collision-induced dissociation (CID). In all measurements, sequenced precursor masses were excluded from further selection for 90 s. The target values for MS/MS fragmentation were 5,000 charges and 106 charges for the MS scan.
Mass spectrometry data processing
The mass spectrometry data were processed with MaxQuant software suite v.18.104.22.168 . The database search was performed using the Andromeda search engine , which is a module of the MaxQuant. MS/MS spectra were searched against a database consisting of 10,152 protein entries from S. Typhimurium and 285 commonly observed contaminants. In a database search, full specificity was required for trypsin. Cleavage specificity C-terminal of phenylalanine, tryptophan, tyrosine, leucine, and methionine was set for chymotrypsin, and up to 5 missed cleavages were allowed. Carbamidomethylation of cysteine was set as fixed modification, protein N-terminal acetylation, and oxidation of methionine were set as variable modifications. Initial precursor mass tolerance was set to 4.5 parts per million (ppm) and at the fragment ion level 0.5 dalton (Da) was set for CID fragmentation. Peptide, protein, and modification site identifications were filtered using a target-decoy approach at a false discovery rate (FDR) set to 0.01 . The mass spectrometry data have been deposited to the ProteomeXchange Consortium (http://proteomecentral.proteomexchange.org) via the PRIDE partner repository with the data set identifier PXD005597.
The numerical data used in all figures are included in S1 Data.
S1 Fig. Quality score assessment of de novo predictions of FliO, FliP, FliQ, and FliR homologs.
Hits are sorted by decreasing score on the x-axis. Black dots represent previously annotated proteins, red dots the newly predicted ones. Darker shades of grey indicate increasing degree of homology.
S2 Fig. Fingerprint alignment of FliP homologs of flagellar T3SS and virulence-associated T3SS.
Increasing shades of grey indicate the degree of amino acid conservation.
S3 Fig. Effects of excess FliP and FliO on motility and flagellin secretion.
A. Motility of the wild type (WT) and a ΔfliO strain carrying pKG116-fliO (pfliO), pKG116-fliP (pfliP) or pKG116 empty vector control (VC) was analyzed in the presence or absence of inducer (1 μM and 10 μM NaSal). Expression of fliO from pKG116 is leaky also in the absence of inducer. Halo sizes were measured using ImageJ and expressed relative to the WT + VC in the absence of inducer. B. Flagellin secretion in the WT and the ΔfliO mutant harboring pfliO, pfliP or the empty vector control. Secreted flagellin was detected by Western blot using anti-FliC antibodies.
S4 Fig. Cross-complementation of a fliO mutant by overproduction of T3SS core integral membrane proteins.
ΔfliO strains carrying pKG116-fliO/P/Q/R, pKG116-flhB/A or pKG116 empty vector control (VC) were incubated in LB + Cm for 5 h in the presence or absence of inducer (5 μM−10 μM NaSal). Expression of fliO from pKG116 is leaky also in the absence of inducer. Halo sizes were measured using ImageJ and expressed relative to the WT + VC without inducer.
S5 Fig. Motility phenotype of epitope tagged mutants.
A. Example of motility in 0.3% agar at 37°C of strain harboring FliP-3×FLAG (WT, EM2225; ΔfliO, EM3201; ΔfliF, EM4909; ΔfliF ΔfliO, EM4910) or FliP-3×HA FliO-3×FLAG (WT, EM2269; ΔfliF, EM3910) chromosomal fusions. Relative motility and standard deviation 4 h and 7 h after inoculation are indicated below (n = 4). B. Shows representative example of motility of episomally encoding FliP-3×HA strains (WT, TH437; ΔfliP, TH17448; ΔfliOP, EM1610) grown 5 h at 37°C in LB + Cm + 0.3% agar non-induced (top row) or induced with 1 μM of NaSal (bottom row). Relative motility and standard deviation 5 h after inoculation are indicated below (n = 9).
S6 Fig. FliP degradation in FliO point mutants.
Chromosomally encoded FliPQ22-3×HA protein levels were monitored at 0, 60, 120 and 180 min after protein synthesis arrest in the wild type (WT, TH17323) and FliO point mutants (FliOL91R, EM2742; FliOV72G, EM2743; FliOΔL91-L94, EM2744). Western blot was performed using anti-HA antibody and DnaK was used as loading control.
S7 Fig. The absence of FliO does not affect FliP membrane integration.
Membrane and cytosol fractions of the WT (EM2225) and ΔfliO mutant (EM3201) were collected 0 min and 120 min after synthesis arrest and separated by ultracentrifugation. Unwashed, solubilized membranes, urea-washed membranes and precipitated cytosols were separated on a 15% SDS-PAGE and FliP protein was detected by Western blot using anti-FLAG antibodies. TCE staining shows total protein levels. DnaK was used as cytosolic protein control.
S8 Fig. Stability of FliP upon overproduction of YccA, an inhibitor of FtsH.
A. Bacterial growth analysis to test the functionality of the pTrc99a-YccA(STM1085)Δaa5-12 expression plasmid. Expression of YccA from a moderate copy plasmid by addition of 1 mM IPTG rescued the lethal growth defect of a LamB181-LacZ hybrid (EM6396, pEM3191 (YccA); EM6399, pTrc99AFF4 vector control (VC)) in the presence of maltose due to jamming of the Sec-translocon. A short LamB26-LacZ fusion (EM6394, pEM3191 (YccA); EM6397, pTrc99AFF4 vector control (VC)) is not targeted to the Sec translocon and bacterial growth is not affected by addition of maltose (Mal). B. The wild type (WT, TH17323) and ΔfliO mutant harboring a IPTG-inducible pTrc99a empty vector control (VC, EM3192) and pTrc99a-YccAΔaa5-12 (YccA, EM3193) were grown in LB + Amp. Expression of YccA was induced by addition of 1 mM IPTG. Samples were taken at 0 and 180 min after synthesis stop and separated on 15% SDS-PAGE. FliPQ22-3×HA protein was detected by Western blot using anti-HA antibodies. TCE staining indicates total protein levels.
S9 Fig. Flagellin secretion in HaloTag fusion strains.
FliC locked strains (FliN-HaloTag, EM1330; FliN-SNAP-tag, EM1331; FliM-HaloTag, EM1328; FliM-SNAP-tag, EM1329; FliO-HaloTag, EM1326; FliO-SNAP-tag, EM1327; ΔfliO, EM2272, wild type (WT), TH5861) were grown in LB at 37°C. Cells (top) and supernatants (bottom) were harvested and separated by centrifugation. Samples were analyzed by Western blot using anti-FliC antibodies. TCE staining was used to determine total protein levels.
S10 Fig. Analysis of co-localization of FliO and flagellar basal body complexes by structured illumination microscopy (SIM).
The sub-cellular co-localization of chromosomal FliO-HaloTag (EM1204, EM1214) and FliN-HaloTag (EM3202) with hook-basal-body components was analyzed using structured illumination microscopy. Strain EM1204 additionally harbored a chromosomal FliM-mEos fusion. Strains EM1214 and EM3202 additionally harbored a chromosomal epitope-tagged variant of the hook protein (FlgE-3×HA). Scale bar 2 μm.
S11 Fig. LC-MS/MS analysis of FliP containing complexes separated by BN-PAGE.
A. LC-MS/MS analysis of prominent FliP-containing complexes revealed after BN-PAGE separation. The heat map represents the relative abundance of peptides from relevant proteins detected in the indicated FliP-containing complexes. B. LC-MS/MS analysis of prominent FliP-containing bands after immunoprecipitation of chromosomal FliP-3xFLAG in a rod− (ΔflgBC) strain background. The heat map represents the relative abundance of peptides from relevant proteins detected in the indicated FliP-containing complexes.
S12 Fig. BN-PAGE analysis of FlhA-containing complexes.
Anti-FlhA (left panel) and anti-HA (middle panel) Western blot of BN-PAGE of crude membrane extracts prepared from the WT (TH17323), ΔfliO (EM1274), ΔfliF (EM3910), and ΔfliO ΔfliF (EM1618) mutant strains encoding for chromosomal FliP-3×HA. The merged anti-FlhA and anti-HA Western blots are shown in the right panel.
S13 Fig. Co-purification of FliO and FliP.
A. Immunoprecipitation of chromosomal FliP-3xFLAG. LC-MS/MS analysis on the indicated FliP-containing bands was performed and the results are summarized in S11B Fig. B. Immunoprecipitation of chromosomal FliO-3xFLAG specifically pulls down FliP. C. Co-purification of FliO and FliP complexes. FliO-FliPHis6 was expressed in Escherichia coli and affinity purified after solubilisation of crude membrane extracts in DDM. Top: size exclusion chromatography after FliPHis6 affinity purification and electron microscopy analysis of indicated elution fractions. Bottom: SDS-PAGE analysis of input and size exclusion chromatography elution fractions. Proteins were visualized using coomassie staining and polyclonal anti-FliP / anti-FliO Western blot analysis.
S1 Table. List of strains and plasmids used in this study.
All strains are derivative of Salmonella enterica servovar Typhimurium LT2 unless noted otherwise.
We are grateful to Nadine Körner for expert technical assistance and members of the Erhardt lab for useful discussions of the manuscript. We thank Frederik Czarniak for preliminary analyses of HaloTag fusion proteins. We are also grateful to Kelly T. Hughes for generous donation of strains, to David F. Blair for discussions, Roman Gerlach for the lacZ-FKF template plasmid and Tohru Minamino for the kind gift of antibodies and fliO-fliPHis6 expression plasmid.
- 1. Macnab RM. How bacteria assemble flagella. Annual Review of Microbiology. 2003;57:77–100. pmid:12730325.
- 2. Chevance FF, Hughes KT. Coordinating assembly of a bacterial macromolecular machine. Nature Reviews Microbiology. 2008;6(6):455–65. pmid:18483484.
- 3. Macnab RM. Type III flagellar protein export and flagellar assembly. Biochimica et biophysica acta. 2004;1694(1–3):207–17. pmid:15546667.
- 4. Cornelis GR. The type III secretion injectisome. Nature Reviews Microbiology. 2006;4(11):811–25. pmid:17041629.
- 5. Galperin M, Dibrov PA, Glagolev AN. ΔμH+ is required for flagellar growth in Escherichia coli. FEBS letters. 1982;143(2):319–22. PubMed pmid:6811323.
- 6. Wilharm G, Lehmann V, Neumayer W, Trcek J, Heesemann J. Yersinia enterocolitica type III secretion: evidence for the ability to transport proteins that are folded prior to secretion. BMC Microbiology. 2004;4:27. pmid:15248901; PubMed Central PMCID: PMC471551.
- 7. Paul K, Erhardt M, Hirano T, Blair DF, Hughes KT. Energy source of flagellar type III secretion. Nature. 2008;451(7177):489–92. pmid:18216859.
- 8. Minamino T, Namba K. Distinct roles of the FliI ATPase and proton motive force in bacterial flagellar protein export. Nature. 2008;451(7177):485–8. pmid:18216858.
- 9. Lee PC, Stopford CM, Svenson AG, Rietsch A. Control of effector export by the Pseudomonas aeruginosa type III secretion proteins PcrG and PcrV. Molecular Microbiology. 2010;75(4):924–41. pmid:20487288; PubMed Central PMCID: PMC3124366.
- 10. Li H, Sourjik V. Assembly and stability of flagellar motor in Escherichia coli. Molecular Microbiology. 2011;80(4):886–99. pmid:21244534.
- 11. Morimoto YV, Ito M, Hiraoka KD, Che YS, Bai F, Kami-Ike N, et al. Assembly and stoichiometry of FliF and FlhA in Salmonella flagellar basal body. Molecular Microbiology. 2014;91(6):1214–26. pmid:24450479.
- 12. Diepold A, Amstutz M, Abel S, Sorg I, Jenal U, Cornelis GR. Deciphering the assembly of the Yersinia type III secretion injectisome. The EMBO Journal. 2010;29(11):1928–40. pmid:20453832; PubMed Central PMCID: PMC2885934.
- 13. Wagner S, Konigsmaier L, Lara-Tejero M, Lefebre M, Marlovits TC, Galan JE. Organization and coordinated assembly of the type III secretion export apparatus. Proceedings of the National Academy of Sciences of the United States of America. 2010;107(41):17745–50. pmid:20876096; PubMed Central PMCID: PMC2955140.
- 14. Erhardt M, Hughes KT. C-ring requirement in flagellar type III secretion is bypassed by FlhDC upregulation. Molecular Microbiology. 2010;75(2):376–93. pmid:19919668; PubMed Central PMCID: PMC3194100.
- 15. Paul K, Harmon JG, Blair DF. Mutational analysis of the flagellar rotor protein FliN: identification of surfaces important for flagellar assembly and switching. Journal of Bacteriology. 2006;188(14):5240–8. pmid:16816196; PubMed Central PMCID: PMC1539977.
- 16. Gonzalez-Pedrajo B, Minamino T, Kihara M, Namba K. Interactions between C ring proteins and export apparatus components: a possible mechanism for facilitating type III protein export. Molecular Microbiology. 2006;60(4):984–98. pmid:16677309.
- 17. Erhardt M, Mertens ME, Fabiani FD, Hughes KT. ATPase-independent type-III protein secretion in Salmonella enterica. PLoS Genet. 2014;10(11):e1004800. pmid:25393010; PubMed Central PMCID: PMC4230889.
- 18. Abrusci P, Vergara-Irigaray M, Johnson S, Beeby MD, Hendrixson DR, Roversi P, et al. Architecture of the major component of the type III secretion system export apparatus. Nature Structural & Molecular Biology. 2013;20(1):99–104. pmid:23222644; PubMed Central PMCID: PMC3537844.
- 19. Hara N, Namba K, Minamino T. Genetic characterization of conserved charged residues in the bacterial flagellar type III export protein FlhA. PLoS ONE. 2011;6(7):e22417. pmid:21811603; PubMed Central PMCID: PMC3139655.
- 20. Erhardt M, Wheatley P, Kim EA, Hirano T, Zhang Y, Sarkar MK, et al. Mechanism of type-III protein secretion: Regulation of FlhA conformation by a functionally critical charged-residue cluster. Molecular Microbiology. 2017. pmid:28106310.
- 21. Fraser GM, Hirano T, Ferris HU, Devgan LL, Kihara M, Macnab RM. Substrate specificity of type III flagellar protein export in Salmonella is controlled by subdomain interactions in FlhB. Molecular Microbiology. 2003;48(4):1043–57. PubMed pmid:12753195.
- 22. Minamino T, Macnab RM. Components of the Salmonella flagellar export apparatus and classification of export substrates. Journal of Bacteriology. 1999;181(5):1388–94. PubMed pmid:10049367; PubMed Central PMCID: PMC93525.
- 23. Ohnishi K, Fan F, Schoenhals GJ, Kihara M, Macnab RM. The FliO, FliP, FliQ, and FliR proteins of Salmonella typhimurium: putative components for flagellar assembly. Journal of Bacteriology. 1997;179(19):6092–9. PubMed pmid:9324257; PubMed Central PMCID: PMC179513.
- 24. Liu R, Ochman H. Stepwise formation of the bacterial flagellar system. Proceedings of the National Academy of Sciences of the United States of America. 2007;104(17):7116–21. pmid:17438286; PubMed Central PMCID: PMC1852327.
- 25. Barker CS, Meshcheryakova IV, Inoue T, Samatey FA. Assembling flagella in Salmonella mutant strains producing a type III export apparatus without FliO. Journal of Bacteriology. 2014;196(23):4001–11. pmid:25201947; PubMed Central PMCID: PMC4248865.
- 26. Barker CS, Meshcheryakova IV, Kostyukova AS, Samatey FA. FliO regulation of FliP in the formation of the Salmonella enterica flagellum. PLoS Genet. 2010;6(9):e1001143. pmid:20941389; PubMed Central PMCID: PMC2947984.
- 27. Barlag B, Beutel O, Janning D, Czarniak F, Richter CP, Kommnick C, et al. Single molecule super-resolution imaging of proteins in living Salmonella enterica using self-labelling enzymes. Scientific Reports. 2016;6:31601. pmid:27534893.
- 28. Pallen MJ, Penn CW, Chaudhuri RR. Bacterial flagellar diversity in the post-genomic era. Trends in Microbiology. 2005;13(4):143–9. pmid:15817382.
- 29. Langklotz S, Baumann U, Narberhaus F. Structure and function of the bacterial AAA protease FtsH. Biochimica et biophysica acta. 2012;1823(1):40–8. pmid:21925212.
- 30. Kihara A, Akiyama Y, Ito K. Different pathways for protein degradation by the FtsH/HflKC membrane-embedded protease complex: an implication from the interference by a mutant form of a new substrate protein, YccA. Journal of Molecular Biology. 1998;279(1):175–88. pmid:9636708.
- 31. van Stelten J, Silva F, Belin D, Silhavy TJ. Effects of antibiotics and a proto-oncogene homolog on destruction of protein translocator SecY. Science. 2009;325(5941):753–6. pmid:19661432; PubMed Central PMCID: PMC2832214.
- 32. Fan F, Ohnishi K, Francis NR, Macnab RM. The FliP and FliR proteins of Salmonella typhimurium, putative components of the type III flagellar export apparatus, are located in the flagellar basal body. Molecular Microbiology. 1997;26(5):1035–46. PubMed pmid:9426140.
- 33. Liss V, Barlag B, Nietschke M, Hensel M. Self-labelling enzymes as universal tags for fluorescence microscopy, super-resolution microscopy and electron microscopy. Scientific Reports. 2015;5:17740. pmid:26643905; PubMed Central PMCID: PMC4672345.
- 34. Delalez NJ, Wadhams GH, Rosser G, Xue Q, Brown MT, Dobbie IM, et al. Signal-dependent turnover of the bacterial flagellar switch protein FliM. Proceedings of the National Academy of Sciences of the United States of America. 2010;107(25):11347–51. pmid:20498085; PubMed Central PMCID: PMC2895113.
- 35. Kumar M, Mommer MS, Sourjik V. Mobility of cytoplasmic, membrane, and DNA-binding proteins in Escherichia coli. Biophysical Journal. 2010;98(4):552–9. pmid:20159151; PubMed Central PMCID: PMC2820653.
- 36. Dajkovic A, Hinde E, MacKichan C, Carballido-Lopez R. Dynamic Organization of SecA and SecY Secretion Complexes in the B. subtilis Membrane. PLoS ONE. 2016;11(6):e0157899. pmid:27336478; PubMed Central PMCID: PMC4918944.
- 37. Dietsche T, Tesfazgi Mebrhatu M, Brunner M, Abrusci P, Yan J, Franz-Wachtel M, et al. Structural and Functional Characterization of the Bacterial Type III Secretion Export Apparatus. PLoS Pathog. 2016;12(12):e1006071. pmid:27977800
- 38. Koirala S, Mears P, Sim M, Golding I, Chemla YR, Aldridge PD, et al. A nutrient-tunable bistable switch controls motility in Salmonella enterica serovar Typhimurium. mBio. 2014;5(5):e01611–14. pmid:25161191; PubMed Central PMCID: PMC4173784.
- 39. Abby SS, Rocha EP. The non-flagellar type III secretion system evolved from the bacterial flagellum and diversified into host-cell adapted systems. PLoS Genet. 2012;8(9):e1002983. pmid:23028376; PubMed Central PMCID: PMC3459982.
- 40. Simmons LA, Grossman AD, Walker GC. Clp and Lon proteases occupy distinct subcellular positions in Bacillus subtilis. Journal of Bacteriology. 2008;190(20):6758–68. pmid:18689473; PubMed Central PMCID: PMC2566193.
- 41. Rep M, van Dijl JM, Suda K, Schatz G, Grivell LA, Suzuki CK. Promotion of mitochondrial membrane complex assembly by a proteolytically inactive yeast Lon. Science. 1996;274(5284):103–6. PubMed pmid:8810243.
- 42. Diepold A, Wagner S. Assembly of the bacterial type III secretion machinery. FEMS Microbiology Reviews. 2014;38(4):802–22. pmid:24484471.
- 43. Karlinsey JE. lambda-Red genetic engineering in Salmonella enterica serovar Typhimurium. Methods in Enzymology. 2007;421:199–209. pmid:17352924.
- 44. Datsenko KA, Wanner BL. One-step inactivation of chromosomal genes in Escherichia coli K-12 using PCR products. Proceedings of the National Academy of Sciences of the United States of America. 2000;97(12):6640–5. pmid:10829079; PubMed Central PMCID: PMC18686.
- 45. Gerlach RG, Holzer SU, Jackel D, Hensel M. Rapid engineering of bacterial reporter gene fusions by using Red recombination. Applied and Environmental Microbiology. 2007;73(13):4234–42. pmid:17513596; PubMed Central PMCID: PMC1932792.
- 46. Eddy SR. Accelerated Profile HMM Searches. PLoS Comput Biol. 2011;7(10):e1002195. pmid:22039361; PubMed Central PMCID: PMC3197634.
- 47. Huerta-Cepas J, Serra F, Bork P. ETE 3: Reconstruction, Analysis, and Visualization of Phylogenomic Data. Molecular Biology and Evolution. 2016;33(6):1635–8. pmid:26921390; PubMed Central PMCID: PMC4868116.
- 48. Letunic I, Bork P. Interactive tree of life (iTOL) v3: an online tool for the display and annotation of phylogenetic and other trees. Nucleic Acids Research. 2016;44(W1):W242–5. pmid:27095192; PubMed Central PMCID: PMC4987883.
- 49. Lex A, Gehlenborg N, Strobelt H, Vuillemot R, Pfister H. UpSet: Visualization of Intersecting Sets. IEEE Transactions on Visualization and Computer Graphics. 2014;20(12):1983–92. pmid:26356912; PubMed Central PMCID: PMC4720993.
- 50. Aldridge P, Karlinsey JE, Becker E, Chevance FF, Hughes KT. Flk prevents premature secretion of the anti-sigma factor FlgM into the periplasm. Molecular Microbiology. 2006;60(3):630–43. pmid:16629666; PubMed Central PMCID: PMC3471667.
- 51. Kaur J, Bachhawat AK. A modified Western blot protocol for enhanced sensitivity in the detection of a membrane protein. Analytical Biochemistry. 2009;384(2):348–9. pmid:18952039.
- 52. Ladner CL, Yang J, Turner RJ, Edwards RA. Visible fluorescent detection of proteins in polyacrylamide gels without staining. Analytical Biochemistry. 2004;326(1):13–20. pmid:14769330.
- 53. Zilkenat S, Dietsche T, Monjarás Feria JV, Torres-Vargas CE, Mebrhatu MT, Wagner S. Blue Native PAGE Analysis of Bacterial Secretion Complexes. Methods Molecular Biology. 2017;1615. doi: 978-1-4939-7031-5.
- 54. Fukumura T, Makino F, Dietsche T, Kinoshita M, Kato T, Wagner S, et al. Assembly and stoichiometry of the core structure of the bacterial flagellar type III export gate complex. PLoS Biol. 2017;15(8):e2002281.
- 55. Rappsilber J, Mann M, Ishihama Y. Protocol for micro-purification, enrichment, pre-fractionation and storage of peptides for proteomics using StageTips. Nature Protocols. 2007;2(8):1896–906. pmid:17703201.
- 56. Franz-Wachtel M, Eisler SA, Krug K, Wahl S, Carpy A, Nordheim A, et al. Global detection of protein kinase D-dependent phosphorylation events in nocodazole-treated human cells. Molecular & Cellular Proteomics: MCP. 2012;11(5):160–70. pmid:22496350; PubMed Central PMCID: PMC3418846.
- 57. Cox J, Mann M. MaxQuant enables high peptide identification rates, individualized p.p.b.-range mass accuracies and proteome-wide protein quantification. Nature Biotechnology. 2008;26(12):1367–72. pmid:19029910.
- 58. Cox J, Neuhauser N, Michalski A, Scheltema RA, Olsen JV, Mann M. Andromeda: a peptide search engine integrated into the MaxQuant environment. Journal of Proteome Research. 2011;10(4):1794–805. pmid:21254760.
- 59. Elias JE, Gygi SP. Target-decoy search strategy for increased confidence in large-scale protein identifications by mass spectrometry. Nature Methods. 2007;4(3):207–14. pmid:17327847.